I have purchased several of these shelves in the past; however, the current one that I recently purchased is not near the quality of the previous ones. The metal is thinner and the construction is out of line on the top of the end units. It was nearly impossible to get the top shelf rails to attach. Only after laying the assembled parts on its side on the concrete floor was I able to use a dead blow hammer to beat the attachment points into the slots while using a pry bar to align the tabs. Worst jigsaw puzzle ever!

Great addition to my garage! It went together very easily. I would recommend having someone help you, but it was a snap. I cut two pieces of OSB for two of the shelves to stop small things from falling through the shelves, and will probably go back and do it for all shelves. The shelves are great but have large gaps due to being wire.

My wife and I have been looking for “bulk storage” shelving for our utility room. Most were either to weak or to costly. This product is very strong and relatively cheap! We ended up buying two sets and they interlocked and look like we only bought one. Well worth the buy!

November 29, 2020 Went to Sam's in Joplin Missouri to pick up one of there Members Mark 4-Shelf Industrial Storage Racks with the 10,000Lb rating. Drove over an hour one way to get there and the same to get back home only to find out the welds on the main side supports were dethatching from the uprights. Words cannot describe how upset I am especially after spending over $150.00 and wasting approximately 3-1/2 hors of my day for nothing. As a consumer I should be compensated for this as this was deliberately packaged this way.

I bought this to replace an old one that I gave away before I moved . this one I purchased at Sam's Club is absolute junk super flimsy does not fit together. We got it halfway together it's all bent up. So at that point we have decided to box it back up and return it to Sam's. I would not recommend anybody waste their time with this shelf. It is nothing like the ones thay carried seven or eight years ago. The Box may look the same or similar. But the quality is absolutely junk. I would give it a zero star if that were an option.

Nice high quality shelving. Very easy to assemble. Packaged box is heavy and two people should load and unload it. I plan on cutting plywood board for some of the shelving to prevent loose items falling through the steel shelving. I would recommend this product to any/every one. I was going to build my own shelving out of 2x4’s and plywood but this purchase was a much better decision.

I purchased 6 of these on Sam’s 1 day only sale 5/11 for $100/each. An absolute steal! I waited in line 15 minutes prior to opening and there were already several members in line. I had done my research ahead of time knowing that they would only carry 10 of these in the store for the sale. When they finally let us in, several members were scooping up the Edsal shelving. I didn’t see the Member’s Mark next to the Edsal ones so I asked an associate. Turns out they had all 10 in the back and hadn’t put them out by mistake. So luckily for me I got first dibs and grabbed the 6! My wife and I put up all 6 within about 1.5 hours. They were very quick and easy to assemble. Quality is absolutely superb! I’m glad I got these over Edsal and they hold 2,500 lbs per shelf! 1,000 more than Edsal. Even though I’ll never use that much, why not have the extra strength!? These also work really well with the Greenmade storage bins that are heavy duty black bins with yellow lids you often see. I’m able to get 3 of those per shelf and stack 2 on the very top shelf for a total of 15 per rack! Other nice thing is the 4 shelves. Some of the Edsal/Muscle Racks only have 3 shelves and at least $130+. So I’m extremely pleased with these shelves!

Great heavy duty shelving for my shop. After remodeling my shop I wanted good solid shelving and found these at Sams Club. Can’t beat the price and delivered for free. No one else could come close in price. Easy to set up and everything fit perfectly

For the price they are nice. Actually better than I thought they would. I bought 4 of them. One had one of the horizontal beams was 1/2 much shorter than it was supposed to be. Contacted customer service they sent a new one out immediately and set FedEx to come and pick up the return.

This 2500 pound per shelf unit is a very good deal for the money but I would not trust that much weight based on the thin gauge of steel and lack of diagonal braces on the backside and the sides. But I would buy it again for the value and the use I will give it. Make no mistake, this unit will be supporting 1000's of pounds....but good luck on 10,000 :) Each rail has 2 bolt holes on the ends(they are unused).......convenient for making the unit a bit "sturdier" so I drilled them out to about 5/16" and used 32 bolts and nuts to brace it up. The vertical metal pegs used for the shelving bracing they rattle a lot so I glued the head of the peg in place. The stout wire mesh is soon to be replaced with plywood. The 2.5"x2.5" square feet are a bit of a joke....they are tack welded in 3 spots and with 6" caster wheels to be welded in place those square feet had to go. The u-channel vertical framework is rather thin but it welded nicely to the caster wheel structure. The black winkle paint was a nice touch. The unit assembled perfectly. No instructions needed. It's so well thought out for simplicity. I thought long and hard if it was a 4 star or a 5 star. I know some people take stars off for silly things and that's not me. I give it 5 stars because I cannot get this awesome of a shelving unit that is 6 foot wide and 22.5" deep. I modded it a little for my own purposes and as long as 10,000 pounds is not put on it I say it's a 5 star!