Installed these a few months back. They seem to be working well. Installation was pretty straight forward but I did have to get creative a few times. Due to my roof pitch I was left with a sizeable opening at the end of the gutter / guard run. I envisioned Carolina Wrens and other small birds using that opening and the gutter for a bird nest location. Definately did NOT want to find baby birds washed out of my down spouts. Patched the first run opening. Cut the rest of the last pieces long and folded the ends down to close tje opening. Forget cutting this stuff with used snips. It is TOUGH. I ended up using my 20v angle grinder which worked great. You will still need to plan on cleaing your gutters. With fall here mine need it now. But no more ladders as the debris is on top of the guards and not in the gutter. Should be a simple matter of brushing them off. I am happy with my purchase and my Gutter Guards.

Just installed about 60' of these with promising results. Read up on the high quality instructions and advice to make your installation the best it can be. Invest in some heavy duty tin snips in advance. I used the self-tapping screws instead of the 3M adhesive strips. The hex-tool included made it easy to position and drive the screws. Even on higher gutters (2 stories) it is necessary to install from the ladder-side of the gutter, so be ready to spend some time on the ladder.

Well built product that is easy to install. Get a good pair of tin snips and you will be on your way. Instructions couldn't be an easier. Instead of the tape I screwed mine down with included self-tapping screws. Very sturdy. Main thing for me was keeping the pine needles out as the lots around me are covered in pine trees. Well, these do the trick. Nothing short of amazing. What a time saver throughout the year. Don't have to roof walk with the blower anymore. My wife thanks you (I think).

These screens are very well made and the installation instructions are very clear and understandable. The gutter guard website has videos and pictures to assist in cutting and attaching the screens to the gutters. My tin snips were too dull to cut the aluminum frames so I used my angle grinder with a cutting disk to make the cuts needed. When the gutters fill with rain water, the front and back of the gutters will spread apart where they are not secured with brackets to the facer board, so be sure the backside of the guards will stay secured under your shingles and not fall down into the gutter. Otherwise, the screens will not shed the debris sufficiently.

I followed the installation instructions and the install was very easy. The gutter glove did a fantastic job as the remnants of hurricane Sally dumped over 4 inches of rain on us.

We bought these hoping to help keep the leaves out of the gutters. I have to say, I was surprised at how easy they went in, and they do keep all the stuff that's not supposed to be in there out!! I love them!! I would definitely recommend these to anyone shopping for gutter guards!!!!

My two sons and I installed nearly 300 feet of the Gutterglove Gutter Guard in our 6" gutters. The instructions were very clear, and we were able to do the whole job in about four hours. When it rained (not a hard rain) we didn't have any spillover. I checked the guards and see grit from the shingles and some tree debris. I look forward to never having to clean my gutters again - just sweeping them off with the The Gutter Guard Brush on occasion. A great product.

These gutter guards are attractive and sturdy; so much better than the plastic one I had been using. The mesh stops pretty much everything except water from getting into the gutters. Corners are the most work because the guards have to be cut with a tin snip to fit, but it's not terribly difficult. Be sure to measure your gutters carefully before ordering - I initially bought the wrong size guards.

I bought this some time back and was going to install it myself. I was washing my home and fell off a ladder injuring my back. Haven't been able to do much of anything. Hurricane Michael came through and did quite a lot of damage. I paid the person that was here repairing my home and outbuilding damage extra to install my Gutter Guard. I really like it. Looks good from the ground. He really liked it himself and wanted to know the best place to purchase it. He wanted to install it on his own home. I told him Sams Club was the cheapest place I had found. Sure hope I never have to have another gutter cleaned.

These are high quality gutter guards and easy to install. The configuration is such that they can be bent (or not) to fit many gutter-to-roof applications. I used them for 6" gutters to traditional shingles, 6" gutters to a flat roof, and 5" gutters to a garage's corrugated metal roof. Installation was easy. Good instructions. I don't know why I didn't do this 10 years ago - I would have save literally dozens of trips to the roof to clean gutters!