I was tired of stopped up gutters that were full of pine needles. Everytime we had a heavy rain, it was like standing under a waterfall. Very easy to install, but you must be careful with your shingles.

Very good product. I predrilled the holes in the material - make for easier installation - even with the screws provided. It would have been nice to offer 6 foot lengths.

Great quality & material. Biggest gripe is w/ roof pitch >6. After bending especially when it is necessary in the direction into gutter. The back thinner width extrusion w/ the small lip doesn’t provide 1/4” nut driver tool clearance for driving screw nor screw head clearance , screw head sits on top of lip & it’s short length does not provide enough screw thread engagement into fascia board. Also, not enough screws for (6) screws per section for this type of installation.

We bought this a month ago. Instructions were excellent. The stainless steel gutter is a great product. The only negative: the self taping screws were too short for the back of the gutter. In the front they're sufficient, but with the gutter being bent to fit in the back, they are too short. We went to a hardware store and bought longer self-tapping screws and that worked so much better. The look is superior to anything else we've tried.

The product comes in 48" lengths. Although that is true, the extruded aluminum at the front and back edges is held short by about 3/4" from each end of the mesh. The mesh is 48" long. By the time you bend the mesh at each end to abut the adjacent section, you end up with around 47" of coverage at a straight run. If you are at the end of the gutter and want closed ends to keep critters and such from getting under the guard, there is at least another 3" of length lost to bend at each end. The point is to make sure you over estimate your lengths to make sure you have enough to finish the job. I needed about 112' so I ordered a 96' and 24' package to complete my house but ended up short by about 10' and I had very little waste. Otherwise, this seems like a descent product and the installation was about what I expected. It is too early to tell since I just installed them a couple weeks ago and the leaves won't start falling for a few weeks, but I feel pretty confident I won't be climbing any ladders to clean out my gutters for a while. We have had a good downpour and I saw no issues of water running over the top of the gutters.

Purchased in the summer and installed them on my gutters of a 1300 sq. foot home and also on a 2 car garage. The stainless steel guards are excellent quality. However, when they were put to the test of a michigan winter, they failed. First lets start at why I purchased these. I live next door to property that has alot of trees, including 1 very large pine tree. (I have no trees on my property). I wanted gutter guards that not only keep leaves and other debris out, but I really wanted them to keep the pine needles out of my gutters. In the fall, I noticed that the pine needles stick in the tiny holes of the gutter guards. Sounds great right.....WRONG! My house looks like it needs a haircut from all the pine needles sticking up. I tried to blow them out of the stainless mesh with a ladder and a leaf blower. They wouldn't budge. They I tried the hose(on the ladder, directly spraying water on them, no luck!) Then I thought, what about a brush on a handle, like the one they advertise on their video. NOPE! So the problem is that while they do keep EVERYTHING out of your actual gutters, keep in mind that because there are so many pine needles filling the holes in the gutter guards, it is difficult for the water to penetrate into the actual gutter and make its way AWAY from your home. The water runs over the gutters and is now producing icicles terribly around my entire home and garage. (We just had our first big snow fall of the year) Great product, nothing gets in the gutters, however, I can see me having to paint my white gutters this summer and possibly removing them due to fact that all these icicles, coupled with the fact that not all the water can actually make it through these tiny holes contradicts why I bought them in the first place. By the way, during heavy rains, the water has difficulty penetrating the holes in the gutter guards and runs over...so you will eventually have water streaks.

The product was great but did not fit well on our gutters. We have 15 year old shingles which are brittle which is making it difficult to slide the gutter guard under the shingles. The 5" ones were about 1/2" too narrow but these are 1.5" wider which made them generally too wide to slide evenly under the shingles

My husband bought and installed these gutter guards on our house about 3 weeks ago. We've had two good rains since then and they are working great. Nothing makes it into the gutter, other than the rain. We have a lot of pine needles and they do not get caught in the guards - I thought they might. I would definitely recommend this product. Now I know that my husband won't be up on the ladder risking a fall.

installer said great product

Great product for a great price! I wish the flanges were a little wider. Installation is a bit tricky if your gutters aren't perfectly straight.