The installation was extremely easy. Two men, handy-toes, installed 340 feet of gutter guards in less than 8 hours. They look great. If it was sins hard some of the water rolls off of the sid rather than going into the gutter. Other than that, they are great.

Easy? Well yes but you you will have to manuplate the shingles to raise them to slide the guard under ,I found it better to bend the right angle first then side under. The woest was my ladder was always in the wrong position and would have to be moved so as to properly slide in the guard and align

Excellant product. Instllation instructions were well written. Worked as designed and to my satisfaction.

I was tired of stopped up gutters that were full of pine needles. Everytime we had a heavy rain, it was like standing under a waterfall. Very easy to install, but you must be careful with your shingles.

Great quality at a good non COVID price. I drilled 3-4 small holes and used the self tapping screws to into the soft aluminum gutter. Shortened long end pieces with a cut off wheel and air motor. I did not drill gutter, only screen.

Very good product. I predrilled the holes in the material - make for easier installation - even with the screws provided. It would have been nice to offer 6 foot lengths.

Used these on our previous house too- work great. Sturdy and easy to install. Fedx shipping poor- 2 of 3 boxes torn open, lucky nothing missing. Spent half hour straightening bent ends

Product worked good for me. Good as anything else available. Only issue was I couldn't join where the 4 ft. pieces fit together very well and i am concerned that debris will get caught up in those locations.

The product comes in 48" lengths. Although that is true, the extruded aluminum at the front and back edges is held short by about 3/4" from each end of the mesh. The mesh is 48" long. By the time you bend the mesh at each end to abut the adjacent section, you end up with around 47" of coverage at a straight run. If you are at the end of the gutter and want closed ends to keep critters and such from getting under the guard, there is at least another 3" of length lost to bend at each end. The point is to make sure you over estimate your lengths to make sure you have enough to finish the job. I needed about 112' so I ordered a 96' and 24' package to complete my house but ended up short by about 10' and I had very little waste. Otherwise, this seems like a descent product and the installation was about what I expected. It is too early to tell since I just installed them a couple weeks ago and the leaves won't start falling for a few weeks, but I feel pretty confident I won't be climbing any ladders to clean out my gutters for a while. We have had a good downpour and I saw no issues of water running over the top of the gutters.

Have a metal roof that was installed last year with new 6" gutters, the back of the house catches all the leaves and I am tired of having to clean the gutters twice a year, I did have to remove the bottom metal screws to get the Gutter Guards to slide under the metal, no big deal, but the gutter guards and I became blood brothers, those screens on the ends can inflict some serious finger damage.