Very happy with the quality of the product and the enclosed instructions were very detailed and covered any typical application. The only reason I did not give this a 5-star review is that it certainly is not easy by any means to cut this material with tin snips (and I have good quality heavy duty tin snips). As a result, for the end cuts and corner cuts, I found it necessary to climb down the ladder, walk to the garage, and make the cuts with a sabre saw, and then return up the ladder to put the piece in place. I have about 200' of gutter. The first 40' was a typical learning process and took longer than expected. The remaining 160' should be more efficient. I would recommend this to any do-it-yourselfer who is comfortable with tools and working on a ladder. However, I would think gard before tackling this project on a two story home.

I bought these for my moms house because she has big trees that leave stuff that I had to dig out of the gutters. Now I just brush off whatever doesn’t blow off. I’ve tried other guards but the holes were too big, the fine mesh does a great job of letting the rain through but the other stuff just falls off.

These gutter guards installed very easily. Took very little time to complete the installation and will be very nice for safety concerns as we age. The instructions were nicely detailed and easy to follow. We are trying to simplify our lives and these will definitely cut down on time we need to spend on maintenance each year.

I purchased 276' of your gutter guards and am nearly finished installing them. I got rained out. The installation was pretty easy for the most part. Corners were a little tricky. I have a pretty complex roof design with seven outside corners and three inside corners. I found it pretty difficult to cut the gutters with tin snips. I used a small grinder with a metal cutting blade that worked really well. While I was installing them I ran a hose on the roof full blast and some of the water ran over the top of the gutter guards. The rain we've been getting has been fairly light and the gutter guards seem to we working all right. I'm a little concerned however that they may not handle a heavy rain. Time will tell. One criticism I have is that I think the screws that were included should have been a little longer, There were a few places, especially in the corners where they wouldn't reach through all the material. Another thing that would have been nice in my case, is that if they would have come in colors. I have black gutters and the shiny silver stands out a little. I'm replacing black plastic gutter guards that matched my gutters but I guess I'll get used to the new ones. Hopefully, they'll work better than the plastic ones.

I bought 184 feet of this in the past month and am very pleased with the quality of the construction and materials in these gutter guards. My roof has a fairly steep pitch but with a small amount of bend over the edge of a board, just using my hands, they fit like a glove to the gutter (I utilized the included hex head self-tapping screws) and slid the top edge up under the shingles. No real issues and they performed well during the past rain. I have a rain barrel off of my largest roof's downspout and the collected water is dirt-free. Nice.

We have older gutters on our house nothing wrong with them just needed new covers. These stainless steel guards fit great. Of course we had to bend some of them but it wasn't a problem to bend them and they fit . Easy to work with and using the screws that comes with them assures me the wind isn't going to blow them off. It rained today and they work!!! Very satisfied with my purchase.

After a few times, bending the guard to fit my gutters became easy. I had replaced the nails attaching my gutters to the fascia board with screws and caused the with to narrow in some places. I started out using two boards and clamps to aid in bending, but then discovered that by wearing gloves, I could bend the guard by hand. After bending, installation was quick and easy. I love the tape down strip on the gutter guard. I only had to use screws in a few places due to bent gutters. My gutters are 25 years old and not straight anymore.

Finally got around to installing my new Gutter Guard. It was very simple and I did not have to use the adhesive or screws at this time because it conveniently fit under my tiles. I can hardly wait not spending time vacuuming leaves out of the gutter. I will be replacing some vinyl guard on another gutter that folded into place and let too much debris settle in the gutter. Want to see it in action too with the next rain - that will take awhile in El Cajon.

After handling this product in person I can attest I think these will be the only and last gutter guards I will ever have to buy. The materials are superb and installation was a snap (once you get into a rhythm of bending the panels). My only criticism is that the packaging for shipping is a little lacking, in that out of the 3 boxes I ordered about 60% were slightly damaged on the ends, requiring straightening with a pair of pliers prior to installation. I called the company and they were very easy to deal with! I highly recommend this product.

The gutterguards were so easy to install. I was only going to do the back of the house to start with but the gutterguards were so easy to install I did it all in about an hour or so by myself. They were 5" wide. I purchased 92 feet and only have two section left over. the package arrived quickly too.