I just finished installing 148' a few weeks ago. I'm a retired builder and recognize a well made product that anyone can install. Working off an extension ladder can be a little intimidating, but the satisfaction of doing this yourself for a lot less than hiring someone...priceless. Should have done this a long time ago, but this product wasn't available then. Take your time and where the sections meet, bend the mesh up on one end and down on the other to make a nice seam.

I purchased 276' of your gutter guards and am nearly finished installing them. I got rained out. The installation was pretty easy for the most part. Corners were a little tricky. I have a pretty complex roof design with seven outside corners and three inside corners. I found it pretty difficult to cut the gutters with tin snips. I used a small grinder with a metal cutting blade that worked really well. While I was installing them I ran a hose on the roof full blast and some of the water ran over the top of the gutter guards. The rain we've been getting has been fairly light and the gutter guards seem to we working all right. I'm a little concerned however that they may not handle a heavy rain. Time will tell. One criticism I have is that I think the screws that were included should have been a little longer, There were a few places, especially in the corners where they wouldn't reach through all the material. Another thing that would have been nice in my case, is that if they would have come in colors. I have black gutters and the shiny silver stands out a little. I'm replacing black plastic gutter guards that matched my gutters but I guess I'll get used to the new ones. Hopefully, they'll work better than the plastic ones.

After handling this product in person I can attest I think these will be the only and last gutter guards I will ever have to buy. The materials are superb and installation was a snap (once you get into a rhythm of bending the panels). My only criticism is that the packaging for shipping is a little lacking, in that out of the 3 boxes I ordered about 60% were slightly damaged on the ends, requiring straightening with a pair of pliers prior to installation. I called the company and they were very easy to deal with! I highly recommend this product.

Very happy with the quality of the product and the enclosed instructions were very detailed and covered any typical application. The only reason I did not give this a 5-star review is that it certainly is not easy by any means to cut this material with tin snips (and I have good quality heavy duty tin snips). As a result, for the end cuts and corner cuts, I found it necessary to climb down the ladder, walk to the garage, and make the cuts with a sabre saw, and then return up the ladder to put the piece in place. I have about 200' of gutter. The first 40' was a typical learning process and took longer than expected. The remaining 160' should be more efficient. I would recommend this to any do-it-yourselfer who is comfortable with tools and working on a ladder. However, I would think gard before tackling this project on a two story home.

Finally got around to installing my new Gutter Guard. It was very simple and I did not have to use the adhesive or screws at this time because it conveniently fit under my tiles. I can hardly wait not spending time vacuuming leaves out of the gutter. I will be replacing some vinyl guard on another gutter that folded into place and let too much debris settle in the gutter. Want to see it in action too with the next rain - that will take awhile in El Cajon.

The best I’ve found...a company came to our house 1 1/2 years ago and quoted ( to start out with) a price of $7,000 and before the salesman left he came down to discount the price to half that. I was determined to do our home for much less than that. We have a huge pine needle problem...Nothing gets through this gutter glove. Our home is over 2,300 sq ft. It took 3 boxes to do the gutters at a cost of around $600.00, not a bad savings for a DIY. IM SATISFIED, I RECOMMEND THIS PRODUCT VERY HIGHLY

This product was easy to install and made with high quality materials. Installed 360 lf on my house with minimal waste. Easy to cut using a metal grinding blade. After completing the install, I got on the roof to blow off the leaves and debris and all debris blew off and did not get stuck on the gutter guard. Tried the water hose on a section and it worked great. Very happy with the product as long as it last for the 10+ years as specified in the warranty. They give a 25 year warranty as long as you register with the company.

The gutterguards were so easy to install. I was only going to do the back of the house to start with but the gutterguards were so easy to install I did it all in about an hour or so by myself. They were 5" wide. I purchased 92 feet and only have two section left over. the package arrived quickly too.

I bought 184 feet of this in the past month and am very pleased with the quality of the construction and materials in these gutter guards. My roof has a fairly steep pitch but with a small amount of bend over the edge of a board, just using my hands, they fit like a glove to the gutter (I utilized the included hex head self-tapping screws) and slid the top edge up under the shingles. No real issues and they performed well during the past rain. I have a rain barrel off of my largest roof's downspout and the collected water is dirt-free. Nice.

After a few times, bending the guard to fit my gutters became easy. I had replaced the nails attaching my gutters to the fascia board with screws and caused the with to narrow in some places. I started out using two boards and clamps to aid in bending, but then discovered that by wearing gloves, I could bend the guard by hand. After bending, installation was quick and easy. I love the tape down strip on the gutter guard. I only had to use screws in a few places due to bent gutters. My gutters are 25 years old and not straight anymore.