Very easy to put together. Can do by yourself if strong and determined but much easier with second person. This is the second one I have put together, this time by myself. With the second person it is much easier. Love that the company already has felt on the bottom of the legs for the bed. Typical set up can happen in 20 minutes or less. All you have to do is unfold, put on the legs, put upright, and plug in. So easy.

This was the easiest bed to set up, it comes folded in half. The only thing you need to assemble is the 6 legs that screw in easily. Quiet operation. I searched several bed frames, but this one had the the adjustable headrest as well as the other adjustments. Much cheaper than others without the adjustable headrest. It is a bit heavy and awkward to move, so you'll need 2 people to get where you need it.

We bought it for guest bedroom and there have been no complaints! I plan to try out the adjustable bedroom to see if I want one in the master bedroom in the future.

Members Mark Premier Split King Adjustable Base. Zero clearance installation. I have a have a King storage bed with a base that is partly wood slats and part finished wood. I need a Split King adjustable base that was zero clearance, or could be used with no legs. The Samsclub.com online description of the Members Mark Premier Split King Adjustable is out of date. It indicates it is not compatible with zero clearance, but the manufacturer has upgraded the design and verified for me that they are shipping a zero clearance model. In the attached photo you can see that the bed fits and works on a storage bed or a sleigh bed design. The split king is shipped as 2 twin XL units. Each with its own remote. My twin XL mattresses were not due to arrive for several days, so I used the included synch cable so either remote adjusts both sides in unison. When the split mattresses are installed, I will remove the synch cable between the frames and the beds will operate independently with their own remote. The shipment was in two boxes. Heavy at around 100lbs each, I was able to get them in the house and up the stairs myself by putting the box on edge and rolling them end over end. When I got the the hardwood floor, placing the box on a blanket and dragging the blanket worked great. Up a flight of stairs by placing the top edge of the box on a stair and using the steps as a lever to rotate the box up (I looked like the flag raising at Iwo Jima lol). The legs and remotes are in bags wire tied to the inside of the frame. Be careful not to cut any wires when cutting the wire ties! Be aware before you position the unit on the bed frame that there are "Left" and "Right" units. To tell them apart look for the USB ports. The USB ports are on the outside edge of the frame. I was afraid that I would need to buy plywood to prevent the rollers from getting caught in the spaces between the slats. But the design anticipated slats and it operates perfectly with no legs. There is a flexible bracket intended to connect the two bed from separating. For zero clearance applications, I would NOT recommend using them. I wasted more time trying to get them to work. They are for floor applications with legs attached. There are velcro straps to wrap around the frame and the slats to secure them. Also included are wood screws of the perfect length to secure the two frames to the wood slats. Position the beds where you want them. Make sure to incline the feet before screwing the fame to the slats. If you have the foot of the unit too close the the bed's foot board it can block the free operation of the adjustable foot of the unit. Once securely screwed in I put the old king mattress on then attached the wire brackets that secure the mattress on the bottom of the unit. Doing this last allowed me to slide the (heavy) king mattress on from the bottom by myself without having to lift over the brackets. Love the bed, even before the split mattresses arrive! The head tilt is awesome. I can see the tv in the sweet spot of my variable lens glasses with dislocating my neck. The remote is simple and intuitive. I can't wait to get the individual twin xl mattresses installed so I don't have to sleep in the same configuration as my wife. (It will be a tough few nights). During several trips to the bathroom I was surprised to see there is an underbed night light. A soft blue color and not bright enough to notice from the bed. I will experiment tonight to see if it is turned on/off by a photo sensor or motion detector - or if it is on all the time. Love the USB ports. But like I mentioned, make sure you don't switch left and right units or you USB ports will wind up in the center of the bed and under the covers. Don't buy this for the vibrating massage feature. It works, but with 12" of mattress on top of the vibrating unit, it doesn't have a chance to be felt in a meaningful way. All in all I am extremely satisfied. Shipping was actually early (promised Saturday and it arrived on Wednesday (4 days early). Installation was easy once I got the boxes upstairs. I would have been done with the two units in an hour (30 minutes each) if I hadn't spent so much time trying to get the connecting brackets to work.

Today I received the frame and was excited for my mother. When I saw the box at my entry way, I was like ok, I have seen worse boxes delivered. When I pulled the box away from the wall, my heart skipped a few beats. Sam's Club it looks like the company you use to ship this frame, doesn't like you or this product, because numerous reviews show messed up boxes. When I finally got around to getting the bed put together, I noticed that the bed only had 3 vibrating motors (2 at the head and only 1 at the foot) and the description photos show 4 and even some the review photos show 4 motors. Was I one of the unlucky ones that got a bed frame that was not Quality Checked...After I call them and find out if there should be 3 or 4,,, I may or may not change my rating. The bed did go together rather easy and with the variable height legs, I was able to keep it low so my aging mother could get in and out very easily. I like that the USB ports are on both side, but they should be moved so you can easily see them from the side of the bed.

Bought two Twin XLs and although there were a few hiccups on delivery (FedEx changed the delivery date 3 times; messed up our timing in removing the old King mattress and box springs). Also, one of the two boxes was damaged enough to make a slit of 3-4" long on the fabric that wraps around the frame/structure of the base. Also, the motor for the back (not the pillow tilt) got affected as it works slow and makes a noise when operated. But that was due to damage during shipping as the other base is fantastic! - it works very smoothly at below average noise, the massage is absolutely wonderful, the response is outstanding (with the 1/8 min ON/OFF ratio, or 12.5% efficiency; ...most bases have a lower % which limits operating the motors in a more continuous fashion). The base seems very well built, and looking underneath you can see well designed parts and positioned perfectly. Is there any room for improvement? Of course, always, no matter what product it is, there are things that one can better. For example, 1) The leg rise range is quite small - they could have allowed a higher rise without, btw, adversely affecting anything 2) The pillow tilt too should be given a wider range (again, no additional cost or adversity by doing so) 3) Bottom, foot-side of mattress, when raised at max foot lift, creates a large gap (between the top surface of base structure and the bottom side of the mattress) - that creates a palpitating effect or springiness which is also exacerbated for short people (less weight is applied at the end of the mattress since feet do not reach all the way down to the bottom of the mattress). Perhaps a couple of straps can hold the bottom of the mattress tied to the base structure to avoid the vertical bouncing (something like SleepOne has in place on their bases) 4) The individual leg sections(of equal length) that make up the full leg could be made with different lengths and been provided with few extra sections of varying length so that the actual height of the base from the floor can be adjusted in smaller increments (instead of the current 3" length for each section) There are some other minute improvement details although not worth mentioning. But all in all, this base is well made, seems to use good parts (great 10-yr warranty), and is above average in design and performance. And if you factor in Sam's price? It is a steal !!!!!!

I plan on updating this review one day when this problem is fixed to keep it as it's high reputation it should deserve as it has great features for it's price; but only when the QA threading leg issue is fixed. Reason for 1 star is NOT because I got a defect, it happens, it's due to the fact I have read multiple reviews from months and months ago with the same issue. The manufactured date on my frame is just a few months back so it still isn't resolved or checked before packaging. You get 6 legs and 6 holes to put them in. 2 of the holes take any of the 6 legs with no issues, 4 of the holes are not drilled out right or have a wrong sized or coarse threaded nut in them. You can either force them thru, retap them or exchange, I sadly only got 3 forced thru and the 4th one is just pure stripped. If this were a TV stand or something that didn't move I'd keep it, but since this is a bed to be slept on for ~10 years, a moving bed at that; I do not feel safe with the one main middle leg wobbly. I do feel bad for Sams club having to ship out a new one and paying to take back the old as this is clearly a manufactures defect. I contacted the manufacture SouthBay International, who imports it, directly thru email 4 days ago and have yet to get a reply, I guess they just take it as acceptable losses, despite it being such an easy fix/check. I think it has not been fixed yet as quite a few people with this issue retap their holes instead of exchanging it as defective so it's not as well reported; being that hundreds of pounds are on it and it moves, I don't want to take that risk. I would recommend buying it, knowing this risk, as it's price point is unbeatable. Knowing you can exchange without issue (it will take a few weeks to arrive). My 1 star is to hopefully get attention so the defect is fixed and Sams doesn't have to keep paying for the wasted shipping of defects.

I normally don’t buy things without doing a lot of research. With this purchase, I got excited as it was the cheapest adjustable base… a few months later, the middle of the bed was sinking. I thought it was the mattress due to using it with an adjustable bed, but no. Then I noticed the metal frame was not straight. Bought another mattress and as I removed the old one, confirmed that the base is what sinks. Sighhhh I guess I’ll use it for as long as I can but it’s not comfortable when I sleep on my stomach.

It’s a nice frame for a decent price.

Super simple to assemble. Very good quality. Runs quietly and smoothly. Yep, easy does it .