Hello. We’re sorry to hear you’re having trouble with the sprayer on your Clorox Clean-Up bottle. We’ve got you covered though! Most issues just require resetting the trigger. Please follow instructions below: To remove the trigger, twist the trigger ¼ turn counterclockwise and pull upwards. To replace/reinstall the trigger, align red tip tube on trigger head over tube inside of the bottle. Note that trigger head should point in the same direction as the Smart Tube running on the outer edge of the bottle. Press straight down on the trigger head until it clicks and locks into place. The red tip should be visible in the Smart Tube on the outside of the package. If the red tip is not visible, the product will not dispense. Remove the trigger again by ¼ turn counterclockwise, and reattach properly. The trigger will snap/click into place when locked. If the sprayer failed to work from initial use, it may take up to 10 trigger squeezes before the product comes out of the bottle. Additionally, make sure you have the nozzle turned to the “ON” position. If your Smart Tube is still not working properly, please give us a call at 800-292-2200. Be sure to use reference number: 170727-000238 for swift assistance. Thanks!