These storage shelves are extremely sturdy and a great value! I was expecting it to be a long process to put this together. It was actually quite easy to do and there is already a hole drilled in the bottom that I am going to use to add casters (not included) so it can be moved easily in the garage. I’m very happy with this purchase.

This 2500 pound per shelf unit is a very good deal for the money but I would not trust that much weight based on the thin gauge of steel and lack of diagonal braces on the backside and the sides. But I would buy it again for the value and the use I will give it. Make no mistake, this unit will be supporting 1000's of pounds....but good luck on 10,000 :) Each rail has 2 bolt holes on the ends(they are unused).......convenient for making the unit a bit "sturdier" so I drilled them out to about 5/16" and used 32 bolts and nuts to brace it up. The vertical metal pegs used for the shelving bracing they rattle a lot so I glued the head of the peg in place. The stout wire mesh is soon to be replaced with plywood. The 2.5"x2.5" square feet are a bit of a joke....they are tack welded in 3 spots and with 6" caster wheels to be welded in place those square feet had to go. The u-channel vertical framework is rather thin but it welded nicely to the caster wheel structure. The black winkle paint was a nice touch. The unit assembled perfectly. No instructions needed. It's so well thought out for simplicity. I thought long and hard if it was a 4 star or a 5 star. I know some people take stars off for silly things and that's not me. I give it 5 stars because I cannot get this awesome of a shelving unit that is 6 foot wide and 22.5" deep. I modded it a little for my own purposes and as long as 10,000 pounds is not put on it I say it's a 5 star!

Sam's did a great job. Ordered for in-store pickup, had it two days later staff loaded it up in my truck and I was off. Shelvings were great quality. First one took about 40 mins to setup by myself while the second one was around 25 minutes. I had no issues with tolerances everything fit perfectly. Price was significantly better than the major big box store home supply stores

I picked up two of these in warehouse. They are very sturdy and easy to assemble. If purchasing more than one unit, the uprights can support shelves in both directions, so 2 sets could be set up as 3 sections (but still 8 shelves between the 3). I liked that the long shelf supports don't have an up or down. Every other industrial shelf I've used requires that the supports be turned around based on which side of the shelf they're installed on. So minor time savings here. I also appreciated the assembly of the cross-braces (4 per shelf). They are simply put in place and a pin dropped in. Similar shelves I purchased from another warehouse required that each cross brace be secured with screws and nuts at the top and bottom where the cross braces meet the shelf support. These are much better. I noted in negative reviews that many people who got these shipped ended up with bent uprights. The package is quite heavy- the description says the box is 126lbs. The box is double-wall cardboard, and the uprights are packed right inside the long skinny edges of the box with no additional protection. You may have seen images from small package carrier facilities where packages are sliding around on conveyors. I don't think the packaging is sufficient for this sort of handling, as impact on the edge of the box will bang into the metal. Suggest picking up in store if possible.

This is the second shelf we bought. This is a different color and texture from the firsy one we bought packaged as the same thing. Its a heavt duty shelf but this time the pieces were warped. We had to use a rubber mallet to get it together. They are literally supposed to just be set in. I believe this was manufactured by a different company than the first one we bought. Overall still a good shelf and serves it's purpose in the garage.

I have purchased several of these shelves in the past; however, the current one that I recently purchased is not near the quality of the previous ones. The metal is thinner and the construction is out of line on the top of the end units. It was nearly impossible to get the top shelf rails to attach. Only after laying the assembled parts on its side on the concrete floor was I able to use a dead blow hammer to beat the attachment points into the slots while using a pry bar to align the tabs. Worst jigsaw puzzle ever!

I have purchased 2 so far and plan to purchase 2 more! My comments: WHAT THEY ARE: - Very sturdy and extremely well engineered and built. - Excellent for commercial and light industrial use, and perfect for home use in a garage, basement or any other home storage area. I'm sure they will not disappoint. - High quality, made in TAIWAN, NOT China, so finish is high quality and NO sharp edges like found in lesser quality mainland produced products. - Attractive paint finish that will look great in any warehouse, garage or basement. - EASY and QUICK to assemble by ONE person with NO (zero!) tools needed, though it is best to keep a rubber mallet or small piece of 2x4 handy to more easily tap in the cross beams into the slots. - They are HEAVY! Each full unit weighs about 120 pounds in the box, so do have someone else to help you or at least ask someone at the store to help you with loading them onto the cart and onto your vehicle. - Can be "daisy-chained," one assembled into the other which if you buy several can free up a frame end and allow you to build an extra unit for every 3 purchased if you spread out the number of shelves (ie, 3 shelves each instead of 4). - Make sure that when you buy it that you are getting the Member's Mark unit that is made in Taiwan. One Sam's Club store had put the very similar, but in my opinion not as good, competitor's unit (a well-known brand, but lower weight rating, and not the same quality IMO) in the place where these would be stocked and I had to get the store manager to have someone pull the right ones down from the top of the store pallet racking. - Regarding other comments about damaged units, I had very minor damage on the end of a channel in one of them but it was easily straightened. Best to inspect the unit at before taking it away from the store if you can rather than getting stuck with a damaged one or having to return a 120 pound white elephant!. And having the open box in your vehicle is not a big deal anyway because once you get it to where you're going, the best way to unload it from your vehicle by yourself is to open the box and take out the pieces one at a time instead of trying to move the whole thing at once. WHAT THEY ARE NOT: - As sturdy as they are, they are NOT pallet racking and I would not recommend using them for pallet storage. - In my opinion, and again as sturdy and well-built as they are, I would not recommend them for heavy industrial use, and personally, I would not load them to the stated maximum capacity of 2,500 pounds per shelf. Use common sense when loading them: heavier items toward the ends of the shelves and on the bottom shelf, etc. THINGS TO KEEP IN MIND THAT THE INSTRUCTIONS DON'T MENTION: - Make SURE that you check EACH cross beam for proper, full insertion into each slot in the frame, and that you check EACH shelf support channel as you install them for proper and full insertion of the pins that secure the channel ends to the cross beams (checking to make sure the pin end is visible coming out of the bottom of the channel and tapping the channels sideways to make sure they are pinned in on both ends is a good way to do this). It's very easy to inadvertently miss one slot when inserting the cross beams, or to feel that a pin was properly inserted and yet miss the holes in the channel and look like it is properly assembled. - Keep the lengthwise wires of the wire shelves UP and the short crossway wire side down when positioning the wire shelves otherwise the wires at the edges rest only on the pin heads (you'll see what I mean when you assemble it). - The wire shelves are sturdy and useful as is, but f you need to store small items and want to have a solid shelf without the holes, you can go to Lowe's or HD and have them cut 1/4" or 1/2" thick plywood or floor underlayment to line the shelves with: 22" wide x 71-3/4" long does the trick to make sure the wood rests completely on the shelf to best spread the load.

Purchased and returned the same day (due to damage) , and purchased another same day and got it home . It too was damaged. Both boxes had VERY minimal exterior box damage. Metal is very thin. Surprised that 3099 people received undamaged units when I received 2 in a row damaged. The packaging quality is poor at least, any mishap in handling from overseas will damage product and possibly allow an unsafe storage rack rated for 10,000 lbs.

Great heavy duty shelving for my shop. After remodeling my shop I wanted good solid shelving and found these at Sams Club. Can’t beat the price and delivered for free. No one else could come close in price. Easy to set up and everything fit perfectly

Good, sturdy shelving on par w the Gladiator shelving I previously bought. Similar quality, similar build and features. One other plus: costs significantly less than Gladiator and others. My only complaint is that one of the end pieces was bent when it arrived. Otherwise, highly recommended.