[This review was collected as part of a promotion.] I purchased this Gazebo to protect single or 2 person entertainment for my restaurant.

[This review was collected as part of a promotion.] The Arcadia gazebo was the perfect solution to cover my existing outdoor deck. The quality is fantastic, it looks beautiful and the customer service was outstanding, they answered all my questions prior to purchasing. I highly recommend!

[This review was collected as part of a promotion.] I love the gazebo if grilling in inclement weather.

This 20x20 carport kit arrived in 11 boxes. When we opened them, there was hundreds of boards and several hundred bolts, nuts, screws, washers and brackets. This could all be intimidating! But, my wife (age 71) and I (age 75), sorted out the lumber and applied an outdoor stain to all of the pieces. We also sorted out the hardware. Luckily, my 75th birthday party coincided with the need to erect the nine vertical posts, so we had help. You really do need extra people for this step. After that, it was all on my wife and I. Took us about three days to finish, working short days because of the heat. A few things to note: Every drilled hole was exactly in the right place. However, on some occasions, boards had to be flopped to align the holes, otherwise you'd think the holes were drilled in the wrong spots. Try not to leave the untreated boards out in the blazing sun. They will twist. Be careful on opening the bags of hardware to keep all of the pieces in their bags, and to be able to read the numbers on the ripped-open bags. You cannot spend too much time squaring the roof. We must have measured it 20-25 times as we went along, before putting up the metal panels, as each time we worked on plumbing the posts and installing the rafters required a slight adjustment. As it was, we were 1/4 inch off, and that 1/4 inch did show up when we put on the metal panels. We installed this carport onto a concrete barn floor laid about 100 years ago. They made concrete tough in those days. Several of the screws we drilled into the concrete snapped off just as they were getting tight. (This also happened with concrete screws we bought at Home Depot, so not necessarily the result of low quality screws by the company.) While the instructions say not to get on the roof, unless you have long, long arms, you do have to either sit on the roof beams or lean way over to screw in the metal roofing panels. But I never felt any weakness from the structure when doing so. Oh, I was lucky and had a dental procedure this summer which has limited my eating. Consequently, I lost about 20 pounds. You need to be lean to fit through the holes between rafters in order screw in the panels from above. By following the instructions (and reading ahead a few pages) this project was very do-able for us. It turned out so beautiful that even our neighbor, who is a building contractor and perfectionist, has complimented us. It does the job of keeping our car and other vehicles dry and is a wonderful addition. We would recommend this carport.

Quality is very good. Looks great! Assembly is best with 2 people and takes a few hours. Polyurethane all wood parts first. Everyone who has seen it wants one! I put it adjacent to the Backyard Discovery Norwood. Wish they would fit together without a gap.

[This review was collected as part of a promotion.] I purchased this for Father’s Day for the hubby. It went together beautifully and made a great addition to our small porch area. Well made, very beautiful and sound structure. He loves it!

Great addition to our backyard, stained ours to match our deck. I found it much easier to build the roof in place rather trying to lift it after building it, not sure why they recommend that but……

This is a quality product with all included hardware. I deviated from some chronological assembly steps for a few reasons. 1. I bolted the four posts to the concrete before attaching the roof because I did not want a gust of wind to blow it over. 2. I assembled the roof truss framing and installed it before adding sheetmetal. It was easier to lift into place and secure first. I then installed the sheetmetal. The directions called for the perimeter roof trim to be placed 360° on top of the sheetmetal ribs. The problem is that the design does not take into consideration the need for a rear drip edge. I did not want water to flow under the trim and down the wood. I, therefore, placed the tear trim under the ribs. Water will now be directed 1/2 inch away from the wood and will then drop straight down. It will also alleviate pine needles from getting trapped under the trim.

This gazebo looks amazing in our back yard, fits our needs perfectly with all its features, beautiful

[This review was collected as part of a promotion.] This gazebo fits our Propane Grill, Smoker, and Charcoal Grill. It allows year round Grilling here in Pacific Northwest