I installed 120 ft of the Gutter Glove in about 2 1/2 hours. We have had 3 good hard rains since and results are super. I may need to install a valley diverter to help direct the valley water. Otherwise this is best product yet. They replaced LEAFGUARD GUTTERS!

Purchased in the summer and installed them on my gutters of a 1300 sq. foot home and also on a 2 car garage. The stainless steel guards are excellent quality. However, when they were put to the test of a michigan winter, they failed. First lets start at why I purchased these. I live next door to property that has alot of trees, including 1 very large pine tree. (I have no trees on my property). I wanted gutter guards that not only keep leaves and other debris out, but I really wanted them to keep the pine needles out of my gutters. In the fall, I noticed that the pine needles stick in the tiny holes of the gutter guards. Sounds great right.....WRONG! My house looks like it needs a haircut from all the pine needles sticking up. I tried to blow them out of the stainless mesh with a ladder and a leaf blower. They wouldn't budge. They I tried the hose(on the ladder, directly spraying water on them, no luck!) Then I thought, what about a brush on a handle, like the one they advertise on their video. NOPE! So the problem is that while they do keep EVERYTHING out of your actual gutters, keep in mind that because there are so many pine needles filling the holes in the gutter guards, it is difficult for the water to penetrate into the actual gutter and make its way AWAY from your home. The water runs over the gutters and is now producing icicles terribly around my entire home and garage. (We just had our first big snow fall of the year) Great product, nothing gets in the gutters, however, I can see me having to paint my white gutters this summer and possibly removing them due to fact that all these icicles, coupled with the fact that not all the water can actually make it through these tiny holes contradicts why I bought them in the first place. By the way, during heavy rains, the water has difficulty penetrating the holes in the gutter guards and runs over...so you will eventually have water streaks.

The product comes in 48" lengths. Although that is true, the extruded aluminum at the front and back edges is held short by about 3/4" from each end of the mesh. The mesh is 48" long. By the time you bend the mesh at each end to abut the adjacent section, you end up with around 47" of coverage at a straight run. If you are at the end of the gutter and want closed ends to keep critters and such from getting under the guard, there is at least another 3" of length lost to bend at each end. The point is to make sure you over estimate your lengths to make sure you have enough to finish the job. I needed about 112' so I ordered a 96' and 24' package to complete my house but ended up short by about 10' and I had very little waste. Otherwise, this seems like a descent product and the installation was about what I expected. It is too early to tell since I just installed them a couple weeks ago and the leaves won't start falling for a few weeks, but I feel pretty confident I won't be climbing any ladders to clean out my gutters for a while. We have had a good downpour and I saw no issues of water running over the top of the gutters.

Have a metal roof that was installed last year with new 6" gutters, the back of the house catches all the leaves and I am tired of having to clean the gutters twice a year, I did have to remove the bottom metal screws to get the Gutter Guards to slide under the metal, no big deal, but the gutter guards and I became blood brothers, those screens on the ends can inflict some serious finger damage.

These gutter guards are high quality and easy to install. Don't see any difference from the professionally installed gutter guards. So far have worked great.

The leaf guards were a perfect fit, only one cut around a gutter mitre. The shipping took a minute, but they did arrive and came well secured in an appropriate box, delivered to my front door. I installed 28ft. , didn't take much effort, just up and down a ladder a few dozen times...

The provided instructions covered the steps required to put these onto my gutters and they went on just fine with a barrel tile roof. The biggest challenge is cutting through the aluminum channel that will rest on top of the gutter since it is shaped to have a drop-down stop of aluminum, like a rudder, that rests against the inner edge of your gutter when installed, but makes it tough to cut with metal shears. Getting them bent to properly cover the gutter and rest against the back, just below the barrel tile roof extensions does take a little bit of work. Apart from that, installation went pretty easy, and I've already seen a lot of tree debris that I'm getting protection from sitting on top of the screens, so they seem to really do the job, and I expect them to last for a long time since they are made from SS and aluminum.

The installation was extremely easy. Two men, handy-toes, installed 340 feet of gutter guards in less than 8 hours. They look great. If it was sins hard some of the water rolls off of the sid rather than going into the gutter. Other than that, they are great.

The installation was easy. This is a high quality product that appears to be doing its job beautifully. This is the first season so time and weather will tell. Unfortunately, it took longer than I would have liked. But not a result of Gutterglove. We learned that there was some wood rot that we had to fix first.

Easy? Well yes but you you will have to manuplate the shingles to raise them to slide the guard under ,I found it better to bend the right angle first then side under. The woest was my ladder was always in the wrong position and would have to be moved so as to properly slide in the guard and align