For years I had a smaller, electric, 1800 PSI power washer which did the job but I had NO idea what I was missing until I got this one! It's very easy to use and obviously much more powerful than the one I had previously so cut the power washing time in half. I put it together by myself, (52 year old female), so I feel like anyone can do it. The only reason why I didn't give it 5 stars is because I had a problem with the oil and had to drain the oil and the oil spilled everywhere even though I had a pan under it, (per the directions). It's possible I did something wrong but was unable to figure out what. Other than that, it works like a charm!

Love my toys and this is no exception. Downfall is directions. For people who are not mechanically inclined i could see them having a hard time putting this together. If company showed either color photos instead of over crowded line drawings it would be much better. It was relatively easy for me once I grabed allen wrench, pliers and wrench ( none being mentioned in directions) and looked at different photos on box, but I'm normally the one putting stuff together. Works like a charm and very easy to move for small people. Would purchase again, but hoping it last as long as my last pressure washer.

My old pressure washer had none of the great features of this one. I really like the shutoff switch, the fuel valve shutoff, the easy access to the hose connection, the large wheels, the wand holder, the easy access to the good size fuel and detergent tanks and the location of the pull starter. .

I read several reviews online on pressure washers online and this model kept coming up. I couldn’t find any in stores to look at so I took a chance Has good power and isn’t bad on fuel. Wish it had the 15 degree tip There isn’t a better value washer out there

Just received this 3200 pressure washer that was shipped with no damaged which I feel is worth noting. Assembly of the few pieces was very easy and fast. After fueling and adding oil, it started up after two pulls. The power and pressure was surprising and satisfying for the price of this unit. The job done to test the unit was totally satisfactory. I used it for approximately 30 minutes and had no complaints except the vibration in the whole unit was a bit noticeable, otherwise I was impressed.

I am very impressed with this power washer, I recently bought an electric washer but this power washer is at least twice as powerful and twice as fast. I would highly recommend this power washer for anyone who needs extra pressure to handle the toughest jobs. I just bought this yesterday and we’ll see how it lasts but so far I highly recommend this unit.

The Westinghouse WPX3200 is an extremely well designed machine. Everything is very accessible and in the right place to make the job easy. The WPX3200 has plenty of power to do all the jobs I wanted to do around the house. Operation is very intuitive. It actually makes the job enjoyable!

I received this pressure washer yesterday. I was easy to assemble, all the parts were there, even the oil, and the assembly took only 15 to 20 minutes. Cranking instructions were easy to follow. Cranked on first try. Washed my truck, did a great job.

I purchased this power washer because I needed one more powerful than my electric one. I assembled and used the power washer 29 Apr 2021 and this review is based only on one use. I have included photos to further explain this review and I will note to refer to photo where appropriate. Pros: - Good Power! The power on this is really good. Because of that I was able to use a 20" surface cleaner which made short work of cleaning my driveway. - Seems Solidly Built. After one use the machine seems pretty solidly built. No problems with any of the engine or pump parts yet. Cons: - Quick Start Guide (QSG) Needs Work!! The only tool the guide (see photo) tells you will be needed for assembly of the power washer is a 10mm wrench (Note: If you download the QSG from Westinghouse site it lists a 10-13mm wrench & a Phillips screwdriver). You actually need a set of plyers (to grip the nuts when installing the Lower Spray Gun Holder since the nut will spin when the screw is turned. Due to the limited space and depending on your dexterity the wrench may be difficult to use here and plyers may work better to hold the nut in place) (See photo), needle nose plyers (to grip the nut when installing the Upper Spray Gun Holder since it is in a very narrow space) (see both applicable photos). You will also need either a Hex key wrench or a Torxx key (Which is what I used) since the power washer does not use Phillips head screws. (See photo of the screw included) I've attached a photo of the three tools that I used for this assembly. - User Manual Needs Work!! The components page of the manual is confusing due to the random order of the numbering on the three views of the power washer. Most good component diagrams will number the picture in some logical sequential fashion (such as numbering parts in a clockwise manner) then base the order of the accompanying table or legend on that. The numbering of the three parts views in the User Manual is completely random making you search for the part numbers in the pictures which wastes time. (See both photos of the components page. One has arrows showing how they should be numbered.) - Need Better High Pressure Hose!! Two-Thirds of the way through my work the hose ruptured! (See both photos) This was the first use of this pressure washer. I had to run to the hardware store to get a replacement hose to finish the work the next day. Not good! Overall this is a good power washer (so far). However it is very frustrating getting incomplete, incorrect and/or confusing manuals and guides. Westinghouse has some smart engineers but they need to have some Non-Engineering kinds of people test whether these things make sense before mass production begins. I don't know why this High Pressure Hose broke but they need to make their hoses durable yet flexible since if the hose is too stiff it is likely break.

i bought this pressure washer on black Friday (not on sale) everything seems to be very well constructed . i was surprised to see the carburetor is made in Japan. because of the weather i was unable to use it very much , but it did a great job on the one section of my driveway i was able to clean. i used it with the westinghouse 15" surface cleaner.