This is my 4th Seville Classic Garage product and I am very happy with them all. My only complaint with this unit is that some of the screw inserts in the drawer faces had damaged threads or were difficult to thread the screws in straight resulting in several cross threaded screws. I don't remember this being an issue with past drawer systems so perhaps there has been a change made? Aside from this issue everything seems to be high quality and works well.

I just got done putting this together (with much help from #2 son) and there's a lot of putting together! It took us a good 4 hours I would say. But, it wasn't difficult. There are just a LOT of screws to put in and most need to be done with a hand held screw driver (provided, nicely magnetized too) The casters are massive and overdone to my mind. It seems to me that is one place they could have cut cost some w/out hurting the quality. Concerning cost, I shopped all over the web and the $199.99 (+ tax) I paid is the absolute lowest price I found for this piece. I still think $200 is too much money for an item like this but then, I'm 60 years old and lived too long when things did not cost so much I guess. I shopped long and hard for what I want for my particular storage wants and believe me, for what they are charging for things out there, this is an EXCELLENT value (whether I personally like it or not.). I have seen things for $400, $500, $600 and more that did not offer what this does. What I like about it; I build models and do leather work, knife scabbards, sheaths and the like. Too many drawer cabinets have a few, deep drawers. Those I wind up piling things atop others or the space above a layer of stuff just goes unused. This has a deep drawer for bulky items but, there are 5 nice shallow drawers. They are wide and deep (front to back) and the drawer pulls far enough out so that things are not hiding in back or buried where they are hard to get at. Last but not least, there is a nice hardwood top working surface. The cabinet is plenty stout but, like another reviewer commented, the drawer glides are a little on the week side. Heavy loads might cause them to drag a bit. I would not recommend this for a full load of mechanics tools. But, any thing up through say, medium-heavy duty would be just fine. If there is a drawback, it would be the purely utilitarian appearance of this but, it was clearly designed as such. I am keeping it in our front room where I do most of my craft work. I am considering attaching a couple pieces of paneling on the sides. That would be easy and make it look a little more... homey. In any case, My area should soon be a lot neater.

Solid, well constructed, high quality materials, and modern look make this a winner. It was time consuming to put together but each piece was manufactured perfectly to ensure smooth operation. Perfect size to complement my workbench and hold my mitre saw. Well done!!

Very good quality cabinet. I purchased the cabinet as space is limited in my shop and the cabinet fits under a Seville table in my shop. The cabinet was easy to assemble without instructions although I would suggest a printed set of instructions be included with the shipped cabinet. Instructions are available online. Everything is included including the tools necessary to put the cabinet together.

This is an amazing cabinet/cart! It did take me several hours to assemble, only because I was being super careful to follow instructions exactly. The secret is to take your time, follow the excellent (and very easy) instructions faithfully and assemble each area and piece in the order listed. I dumped the three sizes of screws into 3 bowls for easy access. I found that if I inserted each screw and just barely assembled each section, I could go back and tighten each screw quickly and there were no problems at all. When I tried to tighten all the screws on one side and then do the other, then the holes didn't line up perfectly and the screws would bind. So TAKE IT EASY and then tighten up each section. It looks great, is solidly built, and rolls like a dream. My zillions of kitchen utensils and baking pans and supplies are finally organized. I just ordered the one with the doors on one side and a door with an interior shelf so I can tuck my mixer in there and put some of the taller baking items in the side drawers. I will build that this weekend. I am a 66 year old female with rheumatoid arthritis and I built the whole thing completely unassisted. The screwdriver they supplied was even better than using my power screwdriver! Buy this cabinet and be happy!

I bought 2 Stainless Steel Toolboxes from another source and needed pedestals upon which to set them. Saw these at Sam's Club and bought them. I finally finished assembly last weekend after installing many many screws. I am delighted with the result and the price and understand that in order to get this thing into a kit to ship in a smaller box would be impossible. If this were preassembled, the price point could most likely not be met. Fit OK Finish OK Function Just fine. Another reviewer mentioned the heavy duty nature of the casters, that is OK too. I have a heavy box on top! They are quite stable.

This was the 4th piece of UltraHD we bought for our garage remodel. This piece is awesome the other ones were terrible. One cabinet the box was all out of wack and the only thing seville would do was send us new doors, but the problem was not the doors, for that reason I give this cabinet an okay rating since the whole line is not reliable.

While this toolbox looks good in the picture - the description fails to point out it arrives in PIECES!! No mention at all of FULL ASSEMBLY REQUIRED!! I am not a novice at assembly. However, this time it took two of us over 6 hours to get this box put together. To say nothing of the out of alignment screw holes and off center panels. The drawers do slide - with effort - gonna take a bit of extra lubricant to get them moving better. I would not recommend this to anyone who does not have at least 1 'friend' who can commit several hours to this assembly or has very little experience in assembly of items. The magnetic screwdriver is a nice touch - and there were extra screws in case one got lost. I was able to use a power driver on a number of the screws - others - no way! Time will tell how well it holds up.

I have several of these units and was pleasantly surprised that after I assembled it that it was about 6 inches or so deeper than the ones I have. They are sturdy and well designed. The only problem I had was that a couple or so of the screws would not go all the way in. It was not the screw it was the nut embedded in the material that must have been stripped partially in. . Luckily I had a few shorter screws and they worked ok. Other than that it went together great. I have other Seville products and I highly recommend them.

I opened the box from one end, pulled everything out and then used the box as a low table to assemble. The instructions are excellent, if you don't try to follow the pictures. They reversed the view of the assembly part way thru. All the parts were well marked and you could probably put it together without instructions, but may have to back track as there is a certain order at times. When doing the large drawers just loosely tighten the screws until you get them all in and squared up. Easy to "rack" the drawer. Rolls very easy. The small screwdriver supplied is magnetic (most of the time, one unit I bought it wasn't) and a big help to start the screw in some of the tight spots.