Great way to protect a reasonably priced TV for outside viewing. My family and I originally we’re using a projector and a screen but it was a hassle to set up and breakdown every time. I priced outdoor TVs but they are way above our budget. I found out about Storm Shells and they are just as promised . Purchased the largest one and have a 65 in TV enclosed in it. The shell is well built and I believe years of football games and movies are in our future while we enjoy the great outdoors.

I have put up several Storm Shells over the years. Recently we added a new pool bath to our home in Florida and added a 55" Storm Shell to protect our outdoor TV. I have to say that it this is the best, most cost effective way to protect our investment. I assembled the unit and installed it onto a concrete block wall in about 1 hour. The Storm Shell has a built in exhaust fan to reduce the heat and humidity. I would highly recommend Storm Shell. It's a great, well designed product.

[This review was collected as part of a promotion.] This does the job of protecting the tv I bought for my back deck, though I installed it under a bit of an overhang so it’s not fully exposed to the elements. I believe it would be fine completely unprotected, it’s good quality hard plastic and the clasps keep it nice and tight. It’s much cheaper than getting an expensive outdoor tv. However, there were a couple things that posed an issue and I had to make some adjustments. First off, the C4 screws are supposed to word for both wood studs and concrete/brick. Probably fine for wood, but they certainly DO NOT work for masonry. I had to go buy some tapcon screws to mount the back of the shell. Also, the concrete sleeves that are provided are way too long for normal brick. Drilling a hole to sink these would almost certain split the brick since you’d have to drill through pretty much the whole width of the brick. Again I used tapcon screws here that I purchased separately. Lastly, and perhaps the most boneheaded design flaw, is that the pre drilled holes where the mount arm is intended to be installed are IN THE WRONG PLACE. For some reason, they are off center, and even after installing the tv as far to the right as possible, the edge of the tv overlaps the edge of the shell making it impossible to put the cover on. The tv is the correct size (you would need a tiny tv to fit it this way, and it would look really silly). I made sure the arm was the right side up and the tv bracket hooks were installed correctly. To remedy this, I simply drilled new holes through the plastic and installed the arm in the CENTER of the back shell. It makes zero sense that the pre drilled are where they are. I had multiple people look at it to make sure I wasn’t doing something wrong, no one could figure out why they were placed off center. So, as long as you’re somewhat handy and can make these adjustments, this is worth the buy.

[This review was collected as part of a promotion.] s Seems very sturdy and easy to use. Time will tell if it protects the tv from all the elements of being outside, but I can't imagine it wouldn't. The cover also allows for a regular tv to be used outdoors, which saves a significant amount of money, as outdoor televisions are over 1k!

Very sturdy and heavy duty

Great Product, So far its working AMAZINGLY, The wall mount is easy to move and adjust.

Easy to remove and reinstall cover, and has kept our outside TV protected from the elements.

Easy installation says 2 people need but 1person can do it all alone. Product is of good quality I would buy again if needed.

Works great for a TV on our patio. Enabled us to buy a regular TV instead of a more expensive TV for outdoors. Installation was relatively easy.

Product was delivered as described. Good quality and so far it has withstood four rain storms with no condensation on the inside. It did take a little bit to figure out how to mount it since we did it outside on a lower level knee wall.