I bought 3 of the 92 ft bundles and have installed them around most of the house. WE have a two story house with a 12/12 pitch and the upper gutters are a challenge. No rain yet but the pine needles and oak leaves are blowing off instead of collecting in the gutters. I really want to see how they handle the snow and heavy rain but very happy so far.

I saw this on a house that my son bought. I needed something to keep out small pine needles. This works perfect. Installation was easy and the videos were helpful.I checked many brands. I think it's the best product on the market.Will be buying more for another of my houses.

I installed approximately 88 foot on Thursday July 19. It took me about 2.5 hours. It was fairly easy to cut with my tin snips and a hacksaw. I did not have any problem lifting the shingles to install the top edge of the gutter guard under them. I used 2 of the furnished screws in each guard. I used the first box I bought for an outside garage and part of my house. I will be ordering more to finish my house. During the past 3 days we have had almost 3 inches of rain and the gutter guards worked perfectly.

installation was a little more difficult than expected. trimming with snips still required supplemental work with a hacksaw. the overlap between sections created a little bump that was hard to smooth. bending to maintain a dip in the screen slowed the installation. It took about 30 minutes per section.

We bought 2 boxes of these guards for our home and we love them. They were easy to install and have made a huge difference in the work to keep the leaves out of our gutters. We have a lot of trees and it was a real hassle to keep leaves out of our gutters. We highly recommend these guards.

I have tried many other gutter guards on my house. I removed them within a year because they didn't work. We have mature trees. I installed this gutterglove on one problem roof edge. It is fantastic. Not even shingle dirt gets through. Yet, it has the capacity to catch rain on heavy downpours without water running over. Installation was much easier than I expected - I used their screws instead of the adhesive tape. I am buying enough for the whole house."

I bought a box with 92ft of gutter guards in it. The box arrived undamaged and the guards were securely banded together in the box. The instructions were very good compared to what I have gotten on other products. You need to read the instructions closely before you start putting these on your gutters because you need to bend them slightly before installing them. I used an old 2X4 laid on top of the guard to bend mine. Once I had all of them bent, I started installing them. Depending on the slope of your roof,the type of shingles you have and how your gutter is attached will dictate ease of installation. The instructions will step you through deciding on the type of installation you need. Overall I was please with the 92 ft I installed and after the first rain, I was satisfied with the results so I ordered another 92 ft for my workshop.

I'm SO happy that I bought these Total Gutter Guards from Sam's Club. I had gotten an estimate from leaf filter, which turned out to be a total rip-off. These Guards from Sam's Club were a breeze to install on my split level home, and they included both adhesive straps and self tapping screws so you have your choice of mounting methods. I went with the screws in case I ever replaced the gutters or roof shingles in the future. I could then save the Gutter guards to re-use on the new gutters.. I HIGHLY recommend this product; I have had no problems with rainwater or clogs... best of all, NO MORE CLEANING ON A LADDER!!!

I finally made up my mind after reading and buying samples of gutter protection items. Gutter Guard is the best I found and the price is very reasonable. Went on real easy although I had to make no cuts except on the last piece for length. The guards are very sturdy, it really surprised me. I don't think they will sag or bend like the others I have seen. The price is great, these ended up being cheaper in price than the cheap quality ones I found. Installation went just as expected with no issues.

I bought this Gutter guard about 3 weeks ago as a trial to see how they would work in the areas where I have the most trouble with leaves with the idea that I will install it on the rest of the house if it works out. The product is well constructed and went up fairly easily. The only issue I had was in areas where I had an intersecting roof (a valley) emptying into the gutter at a place other than the beginning of the gutter. These areas required some tricky cutting of the leaf guard, but I found that if I cut the guard and worked with a smaller piece it was a lot easier to fit. The aluminum edging and screen is very strong and helps the guard to maintain it's shape throughout the installation and in many cases the rigidity of the edging facilitated installed, but I found that the thicker section that went under my shingles was difficult to cut because of the crimp that retains the screen. I found that an oscillating tool with a metal cutting blade worked better than trying to use tin snips on that portion of the guard. Having mentioned the installation and the quality of the Gutter Glove, I should say that I haven't had time to evaluate it's effectiveness, but so far all the leaves and even the shingle stone have been prevented from entering my gutters, and even during recent storms, the guards have not hampered or slowed the flow of water into and out of the gutter. I look forward to seeing how well they do in the fall. So far I'm impressed and pleased with my purchase.