I recently bought and installed this stainless system for my upstate NY ranch style home. Pine needles have been my biggest challenge and I tried the inexpensive plastic home center covers which did ok until the glued on screening tore away. These gutter covers looked to be just the ticket if I could install them myself. Earlier this week, I installed them on a 30 foot section which included an inside corner. I had to bend the back of each panel downward for the best looking result. After trying the method that came with the instructions, I decided to make a simple homemade brake. I screwed two 4 foot, one by two inch boards, to a piece of plywood just far enough apart to slip in a section of gutter guard and bent each piece with ease. At 72, my hands have lost much strength, this made the bending effortless. I also used a small angle grinder with a metal cutting disc to make any cuts needed. This also proved easier than tin snips for me. Once I got going, it took me about 3 hours to complete the section and I can’t wait for another decent day to finish the job. We had a medium shower this morning and they drained perfectly. I am waiting for a deluge to see if there is any overflow like I had with my plastic guards. One more thing I will mention. It appeared that I was using the fasteners provided at a rate where they would not finish the job. I emailed the company and more are on the way, no charge. My gutter cleaning days are over! A great product!

Just had this installed today after fighting with years of clogged gutters. Looks like it will definitely do the job. Very sturdy and will never rust. Mesh is tight enough that nothing but rain water could get through. Looking forward to years of not cleaning gutters again. Installs easy

I bought these 5 years ago and we sold our house right after. I did not install them but brought them with us to our new house. As our remodeling is nearing completion I have begun to install them on our new gutters. They fit perfectly ( I bought the 5” size and used them on 6” gutters). Not sure I would like the way the 6” size would look due to having to hump them up to fit. They go on so easy and fast.

I've worked with other gutter guards that were so bad it was easier to remove them and, just clean the gutters. The SS Gutter Guard by Gutterglove is a dream come true. The design eliminates every problem I ever had with my old gutter guards and the installation went smoothly after I developed my technique. I would recommend the SS Gutter Guards to my friends.

As advertised, This product was easy to install. I opted to use the included screws and the included nut driver. I installed almost 70 feet in about 4 hours. It was easier than I thought. Once I figured out the motion needed to slip it under the existing shingles it went on fast. Had to clean by gutters twice in 6 months before this product. I can already see the leaves blowing off the gutters.

These gutter covers work very well. I installed two days ago, and have gone through our first rain since the install with great results. There is no doubt that these will keep the debris (including roofing sand) out your gutters. I was somewhat concerned whether the water would actually still be able to get into the gutters. After the first rain, all went well. We got about an inch of rain in 24 hours, and the gutter covers took it well. Will have to wait and see how a real downpour goes. The installation was OK. Straight runs go very well, but inside and outside corners were tough to install. The instructions for installation are outstanding! The gutters covers were tough to cut. Good thing - they seem very durable, making them tough to cut; bad thing - they are tough to cut. Take the good with the bad. The use of tin snips to cut these is pretty tough. I used a dremel with a metal cutoff wheel, and that went somewhat better. Overall - A+ for quality, A- for installation ease, A + for quality of the supplied installation instructions.

I purchased 5” stainless steel gutter guards and installed them in 5” aluminum gutters against a metal roof. These gutter guards are a high quality product. However, the quality of the installation depends on how good you are at metal work. I was able to bend the screen nearest the roof down and press into the gutter with a slight bowing of the screen where the spring force holds them in place. I didn’t use the screws and left the backing on the adhesive strips. Most sections laid in flat, but a few required a little extra work to fit uneven openings. I used a 4 ½” angle grinder and aviation shears to cut the sections. They have been installed for three months now during the fall. As Gutterglove’s information says, no gutter guard system is perfect. Leaves will build up on the screen, but are easily removed. Leaves that haven’t blown off tend to get pushed to the bottom of the screen during rain storms leaving room for water to pass through. So far, I haven’t had a situation where rain overflowed the gutters and we get heavy rain here in SC. Early this fall, I was concerned about one area where pellets from oak leaf caterpillars rolled down the metal roof and fused into the fine mesh of the screen. These deposits appeared to clog the screen, but rain water dissolved the deposits and eventually washed the screen clean without overflowing. The insides of the gutters have remained clean. I’ve had metal downspout screens which clog quickly, plastic gutter screens sold by the roll and mesh filters that only last ~5 to 8 years/don't filter out the fine stuff. The aluminum frame and non-magnetic (I assume 300 series) stainless screen material of these gutter guards should last much longer, probably decades. I’ve been pleased with them so far.

I bought this to replace gutter covers that I had, that didn’t do quite the job I had anticipated. Every year, whirlybirds would be standing up, through the bigger holes on the screened cover I had. This gutter guard should take care of that, as it’s an actual screen. Installation was a breeze. Slip a section under my shingles and screw in place. It gives you 2 options, pull and stick tape or screws (came with the guards). I chose to do both. I purchased the 92ft-5in package.

I bought this product three months ago and I just installed it. I am impressed with the quality of the product and how easy it was to install. I live in the middle of a grove of 80 foot tall pine, oak, and poplar trees that shed needles and leaves year round. I performed a lot of research before deciding to buy EASYON. I am looking forward to NOT cleaning out my gutters 4-5 times a year.

I bought 3 of the 92 ft bundles and have installed them around most of the house. WE have a two story house with a 12/12 pitch and the upper gutters are a challenge. No rain yet but the pine needles and oak leaves are blowing off instead of collecting in the gutters. I really want to see how they handle the snow and heavy rain but very happy so far.