I bought this to put on a building that sets under the neighbors pine tree, the gutters fill up with pine needles year around. I was having to clean the gutters out every two months. That was a chore, getting out the ladder, climbing, filling up buckets of pine needles! ( No more chore!) The Gutter Guard Kit that I installed took care of this!

I saw this as a Shocking Values deal and decided to buy it. My wife hates that I climb up on a ladder and on the roof to clean out the leaves and other debris from our gutters. The items arrived two days after being ordered. It took me about 8 hours to install on all the gutters on our house and garage (approximately 350 feet). It was so easy to install. The hardest part (and realy not hard at all) of the installation may be the cutting, which for me, required a hacksaw to cut the frame and and a utility knife to cut the screen. I highly recommend this product for the do-it-yourselfer.

The guards seem to be very well made and can be installed on virtually any style roof/pitch situation! I finally got tired of cleaning the leaves and pine needles from my gutters twice a year and am very hopeful these will do the trick! I just started putting them up so I can't say how they work yet,but I can't imagine anything getting through the fine mesh that these have! I can't wait till I'm done with the installation and the first rainstorm!

I recently bought and installed this stainless system for my upstate NY ranch style home. Pine needles have been my biggest challenge and I tried the inexpensive plastic home center covers which did ok until the glued on screening tore away. These gutter covers looked to be just the ticket if I could install them myself. Earlier this week, I installed them on a 30 foot section which included an inside corner. I had to bend the back of each panel downward for the best looking result. After trying the method that came with the instructions, I decided to make a simple homemade brake. I screwed two 4 foot, one by two inch boards, to a piece of plywood just far enough apart to slip in a section of gutter guard and bent each piece with ease. At 72, my hands have lost much strength, this made the bending effortless. I also used a small angle grinder with a metal cutting disc to make any cuts needed. This also proved easier than tin snips for me. Once I got going, it took me about 3 hours to complete the section and I can’t wait for another decent day to finish the job. We had a medium shower this morning and they drained perfectly. I am waiting for a deluge to see if there is any overflow like I had with my plastic guards. One more thing I will mention. It appeared that I was using the fasteners provided at a rate where they would not finish the job. I emailed the company and more are on the way, no charge. My gutter cleaning days are over! A great product!

Good bye gutter cleaning! Took a few minutes to get the install going, but went quick from there. I cleaned the gutters and used the tape method. I will revisit the gutters later to see if I need to screw them in with the screws and bit that came with the purchase.Good buy

I just installed gutter guards this weekend and I was more than happy with the results. I used the self-tapping screws that were provided to attached them to my gutters. They even provided a magnetic Hex Head Driver Bit for my drill which made installation easy. I was not able to use tin snips to cut the aluminum edges; however, a hack saw did the trick when I need to cut the lengths to size. I had previously used plastic guards; however, the squirrels ate holes into them. I don't think they will be able to chew through the aluminum of the gutter guard stainless steel.

We have a beautiful live oak that drops leaves and twigs year-round making gutter maintenance a dreaded regular chore. We researched gutter guards and ordered 92 feet of Gutterglove. The product arrived quickly and, thanks to pictures and you tube videos, was easily installed. Based on the quality, I think our gutter problems may be resolved!

Bought this gutter guard and installed myself . Easy installation took about 4 hours. Satisfied so far. Been one week since install. Will see when the leaves fall ! I used three screws per 4 foot section and came up short about 30 screws. Had to run to hardware to finish job.

I purchased 210 feet of Gutterglove Gutter Guard and love it. Only took 2 men about 4 hours to install. Water does not bypass gutter but goes into it and keeps the debris out. I would highly recommend! Another salesperson estimated over $4,000.00 for my house. This product is much much less and has better guarantee.

This went much better than I thought. They are made well and easy to attach to my existing gutters. The hardest part was getting up on the ladder, but the best part is I’ll never have to do that again! Can’t wait to see how well they do in the coming fall season.