Looks great! Love the frosted glass to hide what's inside!

I installed the unit about a month ago and it seems to be pretty solid. Many other reviewers said that the instructions were bad and unfortunately, I discovered that they were correct in that assessment. If you are installing this unit yourself, definitely read ahead on the directions and use common sense for a successful installation.

Ordered this in Nov. 2021. Arrived about 3 weeks later. After installing the base we opened the glass panel package and found the movable panel was shattered in shipping. We got a replacement a couple weeks later but the pre installed wheel holders were not installed and were not in the parts package. Finally got all the parts a couple weeks later and finished the installation in early February. It’s very nice now that it is installed.

I bought this Nov.'20 but due to bad, unscrupulous 'contractors', I didn't get it installed til recently. I worried that the base looked smaller than I expected, but when doors were up, it looked much better. The one thing I don't like is that bases are still allowed to be made without non-slip surfaces. They should be required of ALL manufacturers of showers & bases. I wish OVE would switch to those for the safety of their customers. Bath mats don't always perform they way they claim & cause a person to fall.

Beautiful shower pan with matching glass doors! Bought this at the big box store, and so happy I did. Metal hardware is solid, pan is gorgeous. Pay close attention to the dimensions, since the curve bows outward from where it meets the wall (e.g. the 36 inch shower sticks out 40 inches from the wall at the farthest point) -- so make sure it will fit in your space.

Installed in a new studio. diy project. Contractor Tiled backsplash and even had an unlevel wall on bottom due to instlling tile over shower pan. However, because of the way the shower frame installs it is very forgiving.Tiny frame screw Washers and covers are mislabeled. Common sense fix

This shower is everything it says! Looks so nice, clean, and crisp! Had no trouble putting it up or together.... instructions are a bit lacking but video helped a lot! Screws were a weird size and had to use my own screws but overall a great product! Enjoying a shower!

The instructions are to be used a guide. I researched this shower and spoke to the support gentlemen Robert who was very knowledgeable and helpful. the shower is very good quality however is difficult to out together. You need to make sure the base is level and square otherwise everything else will be out. You will need to build up behind the walls a frame on the drywall or cement board to provide support. Also you will need to caulk and silicone are cranks and gaps. - good tub adhesive will be you best friend.

We have a small bathroom and this unit was a great replacement for our 32” square shower enclosure. The assembly went smoothly. The side walls are secured to the house by screws at the juncture of the dot framing. It has not been a problem but surprising at the lack of attach points. The glass pieces weigh about 40 pounds each. The instructions for the base install calls for cement and I would recommend it. I think there would be soft spots in the shower floor without it.

I purchased this Jan 2021 for a pretty small bathroom. I found the shower base to be super sturdy with no flexing. It only took one 60 pound bag of mortar to set the form onto the floor. You will want mortar or cement, but not concrete. The aggregate in the concrete will interfere with setting the base. The shower walls were without blemish and while they feel flimsy, they are actually quite durable. The instructions for assembly were just ok, though the YouTube video was good as a backup. Just keep in mind there are a lot of different YouTube videos, so you will need to pick the one that is specifically for your model. One thing that did cause a bit of an issue for me was there wasn't any data on how far away from the shower form wall from the sheetrock. There is a void behind the shower wall, so my rough-in for the valve was too far into the wall, which was frustrating. If you are roughing in a valve, you will want to allow 1-1/2 inches from the surface of the shower form wall to the sheetrock behind the shower form wall. I also kept the film on the form during the installation, only peeling back what was necessary to caulk or to mount the hardware. Once the whole shower was assembled did I peel the rest of the protective film, and there were no scratches in the finish. Once assembled, it is a very solid feeling shower. The door operates smoothly, and having the magnetic strip to keep the water in is a real bonus. The photos are the work in progress.