Great heavy-duty shelving unit for the price. I'm a 67 year old female and had no trouble assembling by myself, although another person would've made it even easier. Picked up today a little before 3, ran some other errands, had dinner and then started reading directions and assembling around 5:30. Finished at 6:15. Only negative I encountered was one shelf had a small shard of metal not smoothed off during manufacture and/or quality control and I sliced my finger during unpacking. Had to get a pair of plyers to break it off then, sand smooth, so be careful.

These came highly recommended by a friend, and I really like them, too. I found them difficult to put together--it's awkward to get started, the instructions are not clear, and I think the first one I put together is not as solid as it could be. But the second one was much easier and faster, and it is very solid. (Hints: It's easier to put the casters/wheels on AFTER it's assembled, contrary to the written instructions. Otherwise it just rolls around while you put it together. And make sure the locking plastic clips are really together and snug in place before adding the shelves. You WILL want to use a rubber mallet....) I really like that I can roll it around easily, which means I can line them out and pull one out as I need to access it. For the money, these are handsome, solid units, and I recommend them.

When we set up our company "archives" originally, I got cheap plastic shelving because we needed so many units. The plastic shelves sagged, cracked and chipped and weren't quite the right dimensions. When we needed more shelves, I chose these Seville shelves. They were the perfect dimensions for archives boxes and actually hold twice as many as the non-adjustable plastic shelves. The vinyl shelf liners made it easier to slide boxes in and out. I didn't have high expectations for the wheels, anticipating cheap little wheels that would drag more than roll but these wheels are larger and heavy duty and actually roll! So now I am able to wheel an empty rack anywhere in the building, load it with archives boxes and simply leave the rack already organized in the warehouse archives. At the end of the year, I can wheel the older files out to the shredder right on the rack. No loading and unloading handcarts! My CEO was so pleased with the efficiency of the Seville racks that he allowed me to replace all of our crumbling plastic shelving with Seville racks. These Seville Shelves are cheaper than other heavy duty chrome shelves and are better quality than "decorative" chrome shelves.

Bought one of these to make two carts to use in my office. Bought one extra set of casters, put three shelves on each cart, now I have two carts with 3 shelves each, and it's great. Definitely a well-made and heavy-duty item that will last for a lifetime. Relatively easy to put together even for an old lady like me.

I bought several of these to finish out my kitchen pantry. Relatively easy to assemble, definitely requires two people. My husband and I had three of them assembled and put into place in about 45 minutes. Very stable, easy to level, love the adjustable shelf aspects. Strong too. I have 3 more for in my garage, not assembled yet.

I have purchased 6 of these racks. I use them everyday, and move them around a lot! The rack itself has held up very well. And after I built the first one (Which took almost an hour), I now can assemble one in less than half an hour. Now for the bad news. The wheels have bent internally, and are literally "falling off!" They have created an added liability, and I am forced to replace them with a more stable caster. This has increased the overall cost, not mention the time and work to remove/replace them. However, it's still less expensive than what an equivalent rack would cost that would have come equipped with such casters. And adjustable shelving, with the plastic adjusters, can have a short life span. Especially if they move or are moved. I would say that this rack is perfect if you're not going to move it. If you plan on moving them around, shop for caster to put on during assembly to save time, and problems, in the future. My recommendation is to STAY CLEAR of caster that have a screw type assembly, such as those that come with the unit. Use one that encases the entire stem of the shelf. I'm using a Krowne Metal 28-151S.

I have an older version of this rack that's held up great so I bought another. Rust, probably due to poor plating on all the shelves in the same general area. Very disappointed. By the time I started assembly and noticed I decided I was too far along to try to repack everything and return it plus I would have had to get a second person to get it back in the truck.

I just redid my whole laundry room with these shelves and I can't praise them enough. A fantastic value that will last for years. I purchased two of these units for my shed about ten years ago, I used 2 shelves from each to 'span' in between the units to make one big unit that was 12 feet wide by 4 shelves high. Even when loaded with the big storage bins I have no problem rolling the unit around to get behind it and they still look like the day I bought them. I wouldn't recommend any other shelving at any price.

The shelving unit appears to be very high quality. I loo forward to using it. However, shipping (via Fedex--say it all) resulted in the bottom shelf being bent. Customer service was responsive! (big positive shout out to Jeremy), but the vendor shipped out the wrong color replacement shelf--chrome instead of graphite. So I ordered this on 9/5. It is now 9/26 and I still do not have a unit that I can use. The month+ turn around to resolve the issue is frankly unacceptable.

Make sure you check each shelf carefully before attempting to put this together. Three of the 6 shelves had defects- instead of 4 ROUND openings to slide the shelf onto the poles, at least one opening was OVAL vs. ROUND shaped, which made it very difficult to get the shelf to sit level on the poles. I struggled with two of the lesser deformed of the 3 shelves and with the help of a rubber mallet, got them to stay put and level. However, the last shelf had such a deformed oval-shaped opening that it wouldn't sit properly on the poles at all. I contacted Sam's and they worked with me to give me a partial refund so I wouldn't have to return the 100 lb thing!