These benches are extremely well made and worth every penny. The maple top is tough, rigid and attractive. The 2 draws are mounted on bearing slides and installed easily. Having the work light come with the unit was very nice. It also includes a power strip and hangers for the peg board. All in all this is a complete workbench system with no additional purchases required to put it to work. Easy to follow instructions and about 30 minutes of time and you will have a great work area. It also comes with leveling legs so if your floor isn't straight, no worries.

The desk is generally good, but the QA really hurts the product. I received it with one leg dented, and the top also with a couple of dents, luckly the dents on the top were underneath. I was able to still put it together and the dented leg is in the back and not visible in my case, but this should never have happened. Both damages were obviously before packaging, since the packaging itself was fine, and it takes a LOT of force to dent these legs. It almost looks like the damage it was done even before the leg was coated. Really, Seville? Other than that, the workbench is fine. I was dissapointed a bit to find out the front drawers are actually a single drawer, i thought it was two. But that's fine. Do wish the drop drawer was a bit wider so I can put bigger items up there, and the drawers were maybe a tad deeper. The assembly took about 45 minutes to an hour, after having to disassemble a couple of things because I connected them the wrong way. An electric drill on low torque really helps. Also definitely pay attention in the manual where it says not to fully tighten screws, it's pretty important. I didn't end up using the power strip they included, I chose to use one of my beefier strips. It can be a bit difficult to attach a different strip because the holes they provided were meant for a strip that attaches with two screws, so you may have to improvise if you have something that requires more bolts to get fixed. Most of the confusion I've had during assembly was around the assembly of the upper shelf and the drawer, but youtube helped where the manual frustrated. The other thing is, if you intend to use the rubber grommets when running power cables, be gentle with them, they seem to be pretty delicate (one of mine was damaged while trying to feed the power strip through it.

Very well made product. Extremely sturdy. It took about a good hour to set it up, but the directions were awesome, very simple directions. Everything fit together just right. Simplest thing I ever put up. Separate bag with a couple of extra screws, but they were not needed. Everything was organized into separate bags for each set of screws. Top notch product. I would buy more items from this company.

This work bench had detailed instructions, parts were well marked ,and tools needed were provided (I used a drill and bit to speed up process). It is perfect for small work bench or hobby station. Legs can attach casters (bought separate)if stationary not needed.would recommend and buy again.

Nice workbench, good solid legs and frame. Top is 1.8 inch thick birch wood and finished almost too pretty to work on. Shouldered screws for power strip do not allow for tightening the power strip down, holds it in place until you plug in tools and move stiff cords and then it comes off the screws. No safety hazard just an inconvenience.

I am very happy with my work bench--easy to put together and it is quite study. Looks great as I pull into my garage--gets me inspired to get to work. Love the overhead light, the receptacle mounted on to the peg board and of course, the drawers. The height is a little too tall for me (5'5") but otherwise it's a great purchase. I am going to get some zip ties to keep the peg board hooks in place for the few that won't be moved about. I don't like reaching for a tool and then having to pick up the hook off the ground.

I was pleasantly surprised to find clear, concise assembly instructions that even warned me of the expected potential mistakes in advance. It was well labeled and written in real English. The quality of the table exceeded my expectations and I expect many years of use from it.

Bought as a workbench to work on my rifles & pistols. Works great, very sturdy. I chose not to mount my 5" bench vise, it would take up too much space and didn't want to drill into the butcher block (which is nice quality bench top). I would definitely recommend

I can only add to the other sterling reviews of this workbench. The packaging is superb and the assembly instructions straightforward and easy to understand. Assembly is a breeze - you even get a wrench and magnetized screwdriver. When pushing the drawers closed for the first time, they may appear to be stopped by a couple metal tabs - just make sure the drawer is on the slider correctly and push a little harder. Don't forget to take the paper protection out of the light. Enjoy your quality peoduct.

I was surprised how cleverly designed and thought out this workbench was. It assembles into a highly functional, sturdy and very utilitarian unit. All didn't go smoothly with the assembly, however. Two of the four leg threads for the adjustable feet were not quite cut accurately. One was worse than the other but neither of those two feet could be screwed in without a lot of lubricant, force and a much heavier wrench than provided with the unit. I finally got them all installed only to find out that my wife, who is going to be the user of the workbench, felt that it was too tall with the adjustable feet attached so we wound up removing them. If you are thinking about using this workbench while sitting, you will need a tall stool if you keep the adjustable feet installed.The table top is 36" above the floor without the adjustable feet attached and at least 2 inches or so higher with the feet screwed in as far as they can go. A couple other problems arose as well during assembly with one of the small screws for the shelf not going in completely and we had apparent shipping damage to the piece where the LED light attaches being bent on one corned as well as one end of the back leg brace being misshapen. The latter took some use of a vice and mallet to get it close enough to fit over the leg properly. All in all, we are very pleased with the unit. The wooden top is thick, sturdy and a very pleasant surprise due to its high quality. I'm thinking of buying a second one for myself.