I purchased 4 of these for my garage and my sister and I put them together by ourselves, with no problems. We became very proficient after the 1st one. The instructions are clear, with only one minor item. They forget to tell you to use screws on the back panels, but it's quite evident that they are needed and where they go. There was one bad screw receptor on each cabinet where the screw would not go in n or come out, but a very minor problem. Overall, HIGHLY RECOMMENDED. Very sturdy and easy to move around. They look really nice also.

Of the 4 different Seville units I bought, this was the easiest and fastest to assemble. Could use a power screwdriver for 95% of the time, which really sped things up. Even tho there are larger flat panels, the reinforcements and method of assembly makes it very sturdy when finished. Again, get all the screws started before tightening any. Easy to get things out of square and then you fight to get screw in. Should have mentioned in other reviews, the riv-nuts that are used don't take a lot of torque. Set your power driver fairly loose at first and them test for tightness with a screwdriver. If you spin one of the riv-nuts or crossthread, you will be looking for sheet metal screws to finish.

Overall I like this product but I rated 4/5 because I am slightly disappointed in how easily some of the screws were 'stripped' while trying to assemble. (about 4 in total) I tried backing them out but I couldn't. Now they're just "there".... Also, I wasn't a fan of how thin the edges were to the backing pieces (received some that were bent/curled) but luckily I was able to try & work those out with some pliers... I also purchased the "Seville Classics UltraHD Rolling 4-Drawer Storage Cabinet with Key Lock" and the construction/manufacturing of that seems more 'solid'. Just my $0.02

It was missing a screw. It had a dent in it. It’s not as sturdy as I expected it to be. But I bought it for the garage and it will do what I bought it to do. It’s functional. It’s very Important to fasten it to the wall. It looks good for the garage.

I use this storage cabinet in my shop and it is perfect. The casters are large enough I can move it into my drive way and then clean the floor where it was sitting. The reason I mention this is because I have a 1/2" drop from my shop floor to the driveway and it's not a problem.

Excellent quality and fit. Easy assembly, clear instructions, even includes needed tools. No regrets, never expected this quality and sturdy construction from a unit that comes in several pieces. Can't believe anyone would give this less than 5 stars

Kiddo school storage made easy. Game cabinet, school supplies, anything. Locks also. Fits standard cardboard file boxes, 2 per shelf, and can stack on one shelf so fits 10 file boxes. This one is sturdier and cheaper than the one with single-piece doors and sides, but takes a few extra minutes to assemble.

I’m converting a two car garage into the ultimate “Man Cave”. I’ve got my bar, pool table, gun safe, gun racks, huge 86” TV , and even my Harley in there. I needed a storage cabinet that would fit the space behind the door and make that space usable. But it had to be on wheels, because the fuse box is on the wall behind the door, (behind the cabinet). This cabinet fit my needs PERFECTLY! I’ve got all of my ammo, spare magazines, and spare gun parts, with LOTS more room for more! I ordered two extra shelves because most of what I’m putting in this cabinet is boxes of ammo, magazines, and spare parts. I needed lots of shelf space to organize it all. This cabinet is perfect for my needs. It was easy to put together, although it took a couple of hours to do. I had a table, made of a sheet of OSB board on sawhorses, in my carport to work on. That made it a lot easier than trying to put it together on the floor. My only complaint; a few of the small screws that hold things together, got cross threaded. Once they get started cross threaded, it causes the anchor, which is press fitted into a hole on the other piece, to start turning. Then you can’t back the screw out and try again, because now the anchor is turning in both directions. You can’t continue forcing the screw in tight, and you can’t back it out, because the anchor is turning. After the first one did that, I thought it was my fault, so I was much more careful with the rest, but still, a few of the screws wouldn’t go in without cross threading. I’m questioning the quality of the threads in the anchors or on the screws. Fortunately, none of the cross threaded screws that didn’t go all the way in tight, adversely affected the structural integrity of the cabinet, and they aren’t where you can see them. This isn’t the “toughest” steel cabinet you could buy, it’s easily dented. However, its structural strength is more than adequate for my needs of storing several hundreds of pounds of ammo and gun parts. For the price, you can’t beat it. And the appearance of this cabinet is really nice! I wish they’d get the matching top storage cabinet in stock, so I can put it on, for more storage space.

I recently added two more of these to my garage. These were the special red color units and were shipped direct to my home. One the first unit I found the bottom shelf with a minor dent and that was due to handling as the box was crushed at that location. Later discovered a bad threaded nut which delayed assembly. On the second unit the base again was slightly bent but was done in the factory. Minor issue resolved with pliers to align the edges of the lower edges. Neither of these required contacting Seville as I was able to complete the assembly. I give tons of credit to Seville for the packaging of these multiple sections. Each one is plastic bags and then encased within foam. I did take a bit of extra time at the final steps and painted the front reinforcements a black color instead of the grey plated metal seen in their photos. This assembly process takes ton of screws which the included magnetic tip screwdriver is great touch.

Easy to put together, includes magnetic screwdriver to make assembly easy. Best packaging protection I have seen. Each piece in plastic bag and all pieces protected with Styrofoam to keep from being scratched. Every piece labeled so no guessing what is what. See pic of just how much protection in just that box. Everything lined up perfectly when assembling. Came FED-x truck.