Took some time to put together but really is a great tool box for the price. It took me about 3 1/2 hours to unbox and assemble. It was quite easy to do by myself, just needed a little help flipping it over after installing the casters. The metal is not the thickest out there but it definitely does the job.

This is absolute JUNK! I am normally very satisfied with everything I purchase from Sam's or Costco and that is why I am so loyal to them but I am embarrassed for Sam's for carrying this tool bench. The wood top is very nice and the castors are very heavy duty but everything in between is sooooo cheap! I would have been better off purchasing the 2-pack of foil and crafting my own bench! The metal is so thin that basically every panel and drawer front was dented out of the box and the large drawer is too small by 3/4" all the way around. This I can't understand because it's the only drawer that size so how could it be that far off??!! I would return this in a second if it wasn't at my cabin 2 hours away but the top makes it very heavy and too much to mess around with so I will wait until it just falls apart (which won't be long) and bring it to the dump. Don't purchase any of this Seville junk! You will be terribly dissatisfied!!

I bought one of these and 2 of the large cabinet units. This one was a real chore to put together but it is well designed and strong. This is not Industrial grade of course but better than most residential/light commercial storage units. These are from Taiwan, not China. Will buy more Seville from Sams!

I got this yesterday at sams club that is closing down , today I put it together I took my time and it was the easiest thing I put together. My wife was proud of me not swearing because I took six hours doing it. This was a well built bench and glad I finally decided to get it, Just remember it takes three to four hours to put together.

This is an excellent cabinet, heavy duty and well made. Takes some time to assemble, but instructions are good and the fit and finish is very good. It is a very high class look to a professional workshop. Buying additional wall cabinets to match. Great look

Great price but slightly disappointed. The shelving is punched to bend and form shelf sides. These areas have paint flaking off instantly. It had minimal damage right out of the box. When you pay hundreds of dollars you shouldn’t have damage even minimal.

I love the work bench! It wasn’t hard to put together and I didn’t have an issue with the directions. I use it every day in my garage. I would give it 5 stars but when I picked it up from Sam’s Club 2 employees helped put it in my car and they broke a piece off in the back of my new car. I know it was an accident and there is nothing to do about it. Just be careful when you haul it home. It is really heavy.

Great product, some helpful assembly hints: - this is all metal to metal screw assembly. Highly recommend a threadlock product such as Loctite Threadlocker. Will help eliminate loosening. Don't aggressively over-tighten screws. - comes with a magnetic screwdriver - a must! Highly recommend a powered hand held driver with a magnetic adaptor. Don't use a high powered driver like DeWalt; too powerful and no room. - I had to take off some of the drawer slides to properly secure the unit. They will come off and back on with ease. - Assembly is easy but time consuming. You'll need another person for some of the steps.

I was disappointed when the top of the cabinet did not fit properly. I tried everything I could to get it to line up properly but it turns out the top was about 3/4” too short on the width and I had to re-drill the frame in order to get the bolt in. There is now a 3/4” gap between the butcher block top and the frame edge that I faced to the back of the cabinet to hide.

After buying the 6 foot table, the 4 foot table, and the work bench, I thought, inspite of the reviews of damage, I would give it a try. I found the needed tools for assembly to include the following: 4 pound dead blow hammer, table saw, chop say, multiple C-clamps, small (8 oz) ball peen, medium (16 oz) ball peen, multiple pieces of oak or maple scrap. After unpacking the jig saw puzzle and finding the first damaged panel, I spent 2 hours cutting small blocks of oak to use, in conjunction with a variety of clamps, to press pieces back into a reasonably straight condition. Once generally straight I used the ball peen hammers, and bucking bars to make the parts straight. Bear in mind, I inspected the boxes upon arrival. The was no damage to the outside of the boxes, or the Styrofoam inserts. Once I straightened the end piece I installed the back to discover it had been dropped and crushed during packaging or production. All told, between unpacking, failing to assemble, realizing I needed to return the product, talking to Seville Classics (that was it's own nightmare, 0 stars for their customer service) and making an attempt to stuff the genie bake in the boxes, this project wasted over 6 man hours. Additional hours were wasted arranging a return pick up of a 400 pound paper weight sitting in the middle of my drive way. Personally, I'm terrified of driving the 200 miles to Sam's to buy it in-store. Simply inspecting the box for damage is no insurance the parts were not destroyed at the factory. I spent time fixing bent parts on the work bench also, but was able to make it work. Unless you posses a broad array of of tools, and want to give away hours of your time, to only be disappointed I would think twice before buying this product.