I bought this shower (with walls) to replace an older MAAX shower (of similar design) in my basement after its base cracked and some water leaked into the subfloor below. Besides the cracked base, there were other problems with the old shower, so I decided the whole thing needed replaced. I'm somewhat handy, so I wanted to do as much of the tear-out and installation as possible by myself. The base of this new shower appeared thicker and sturdier than the old unit, so it gives me some confidence it will last longer. The drain location for this unit is near the corner whereas my old shower had the drain in the center. This required the drain pipe underneath the shower to be moved a foot or so. I opted to hire a handyman to move that drain pipe (which involved chiseling away a bunch of concrete) and get the base of the shower installed. Beyond that, I finished the rest of the installation myself. This occasionally required the help of my wife to hold something in place for me, but 95% of the time I worked alone. I like the glass enclosure versus my old plastic one. The two large glass pieces were a little heavy to maneuver during installation, but the door operates very smoothly and seems really sturdy. Overall, this shower seems built of higher quality materials than my old one, and I really hope it lasts.

ordered this shower a couple months ago and finally got it installed without too much problem. the real problem was the instruction book. i looked at the video on utube and the book and video wasn't even close. if i wasn't a handyman with carpenter experience i would not have been able to install this shower. the product is great but the instruction book needs updated.

I purchased this Jan 2021 for a pretty small bathroom. I found the shower base to be super sturdy with no flexing. It only took one 60 pound bag of mortar to set the form onto the floor. You will want mortar or cement, but not concrete. The aggregate in the concrete will interfere with setting the base. The shower walls were without blemish and while they feel flimsy, they are actually quite durable. The instructions for assembly were just ok, though the YouTube video was good as a backup. Just keep in mind there are a lot of different YouTube videos, so you will need to pick the one that is specifically for your model. One thing that did cause a bit of an issue for me was there wasn't any data on how far away from the shower form wall from the sheetrock. There is a void behind the shower wall, so my rough-in for the valve was too far into the wall, which was frustrating. If you are roughing in a valve, you will want to allow 1-1/2 inches from the surface of the shower form wall to the sheetrock behind the shower form wall. I also kept the film on the form during the installation, only peeling back what was necessary to caulk or to mount the hardware. Once the whole shower was assembled did I peel the rest of the protective film, and there were no scratches in the finish. Once assembled, it is a very solid feeling shower. The door operates smoothly, and having the magnetic strip to keep the water in is a real bonus. The photos are the work in progress.

Installed this month. The instructions aren’t super clear but we figured it out eventually. Sometimes with trial and error. They also don’t tell you until you see the instructions that you need to install it on drywall not studs and that you need 1x3’s to build a support.

Happy with the product so far just installed haven’t used it yet

Love the corner shower, very nice quality made product, looks awesome!

Happy with product. Looks great in remodeled bathroom. Door opens and closes easily.

The unit looks and works great, but is very fiddly to install.

Very nice shower, I highly recommend it! Worth the money I paid!

Showed the wall as a 2 piece firm backing....what I got wa a one piece thinner wall that was awkward to put up unless you had a second person to help.