It fulfills it purpose of being a completely wire free camera that you can place anywhere within the range of the wireless recorder. Good features and sensitivity, and the ability to "Speak" through the Camera speaker and "Listen" using the Mobile Application. One Caveat though is that while they say "Up to 6months of Battery life" that must have been in an empty room with zero "Triggers" on the camera, since I have this configure to only trigger on "Human" and "Face" and with 10-12 Triggers per day, the batteries only last 2 weeks before needing a recharge. However, knowing that was likely, I also bought the wall charger that comes with a spare set of batteries so that you can just swap the dead ones with the fresh ones and put the others back on the charger for the next time.

Excellent operation in setup and viewing. One thing, the firmware needs to be updated on the MCU to have more selections of viewing IE: Picture views of 1-8 of the hardwired cameras and 4 wireless. A diagram of 1-12 and option of rolling selections of what user chooses. With current firmware wireless pix cannot be manipulated. IE move to a new position. But besides that great equipment, I have been using Night Owl since early 2000’s

I bought the cameras as an add on to my already existing system. I expanded from 4 to 8 cameras. The instructions were simple to follow and the setup was very much "plug and play". The 8 camera system will give me that piece of mind while on vacation, as well as, fantastic monitoring capabilities from my phone. Great product and I highly recommend.

I can only sum it up as an AWESOME system. I still have 2 cameras to place but so far I could not be more pleased. It has all the features that I could ask for. Customer service techs are super when or if you have a problem understanding anything about using the system at all..

I bought the 4 camera system 2 months ago. Once I learned how great these cameras work day and night I decided to increase the system to 6 cameras! Then by only 3 more weeks I decided to get 2 more!!! So the system now has 8 cameras!!!! It is AWESOME!!!!

Ok. So I bought 2 of these cameras. I didn't want to pay a subscription fee. I bought two micro sd cards 128gb to use for storeage and recording. I like the fact i can take pictures and they get saved to my gallery on my cell also the manual recording also goes to my gallery on my cell . Sofar 6 months I've had these cameras and they seem to work good. Sometimes a little behind but that could be my cell cause I have 1gb wifi and it is high speed. I also like the features that come with this camera. Was quik and easy to set. Came with 2 batteries each. I bought 4 more batteries and a charger cause 2 batteries don't last but 3 weeks if you use these cameras everyday for recording. Also I bought the solar panels so i wouldn't have to charge the batteries so often getting ready to connect them 2day. We'll see how they work out. The picture is very clear whether it's a recorded video,picture,or live. Just can't seem to figure out why sometimes the cameras are a little behind but all in all good cameras for the price.

I purchased the WNIP2LBU camera a week ago to add a fourth camera with my Wire free Smart Security System with three cameras. The WNIP2LBU camera is a great addition to my system and displays a really nice colorful picture. The WNIP2LBU camera is AC powered. I wish the camera was battery powered like my other three cameras and that the camera mounting plate allowed you to move the camera left and right, and up and down to establish the final viewing angle. The existing mount lets you move the camera up and down only. Overall the camera is a great buy.

Added this camera to an existing wireless system. The mounting and adjustments on this one is lacking. But the quality of the camera and the wide angle overcome it's difficult mounting. Am able to capture two rooms with 1 camera. The Battery powered are great outside and this is a wonderful one indoors by the plug..

The first NVR that I received with my WNIP2 system would not get to the startup page and had to return it. The warranty replacement NVR made it to the Startup Wizard and was now able to complete the NVR and camera setup. At first the mouse was working but the menu on the monitor didn't seem to be working. I did a factory reset to see if the menu would start working but the mouse stopped working. I then used a different mouse and it worked and the menu worked. After I plugged the Night Owl mouse into the my computer, it seemed to reset and was able to now work with the Night Owl System. I still have one problem, when I go to the computer Protect CMS App I get this: Says the NVR is OFFLINE, when it seems to be working monitor and the phone. I’ve tried all of this but nothing works! NOTE: If you are experiencing this status, please perform the following steps: 1. Plug an Ethernet cable from your router (network) to your Night Owl recorder. 2. Wait until a system prompt appears stating “Internet Detected.” 3. Click “Login.” 4. Enter your local admin password. 5. Click “Login” again. 6. On the Night Owl Protect App icon page, click “I already have an account.” 7. Enter your Night Owl Protect login credentials. 8. Logout of the Night Owl Protect CMS and log back in. 9. Your Night Owl device should now be showing an Online status.

set up was fairtly simple but if your using a desktop set up its VERY limited on what you can do or adjust. they make you use the App.. fine but its VERY SLOW. video on day one as 10s slower then real time.. that's a LONG time when somebody is waiting at the door. or breaking it down. looking at past footage is clunky. not easy to select times, to view, and again its all on your tiny phone so cant see much.. you cant access the past footage on the desktop application. only phone... that should not be a hard fix for them. so what's the prob? and you have to pay for a advanced version of the app to access footage from ANYWHERE. or you can only use it when your in WIfi range.