I purchased five of these cabinets along with one of the double door cabinets with a shelf for my garage. They all showed up in a timely manner, delivered by FedEx. The boxes all arrived in good shape. The cabinet parts were decently packaged wrapped in plastic them separated by styrofoam. I opened one box and lay the cardboard on the kitchen table to assemble the cabinet on top. This was WAY more comfortable than attempting to assemble on the floor. My first cabinet took me slightly over 30 minutes to assemble using only the supplied screwdriver. I thought about using an impact driver but the proximity of the screws to the inside edge of the cabinet and the thickness of the impact driver would make for a large angle into the screw head - with a 6" driver bit, you'd still be off at 15°-20° from straight. I was also initially worried about strength of the supplied screws - that proved to not be an issue. So - I assembled the perimeter of the cabinet using only the supplied screwdriver - left side to the top and bottom of the cabinet (face up) then flipped the cabinet to install the right side - this was easier for me keeping the screws on my left as I'm right-handed. Then, you attach the two rear panels - start all the screws, snug the corners and measure corner to corner to make sure the frame is square, then tighten all the rear panel screws. This is where the impact driver came in handy. There are 20 or so screws to secure the back panels. Attach the door/hinge to the frame and it's ready to hang. The door hinges are slightly slotted for adjustment - I recommend getting it close and make your final adjustment when the cabinet is hanging, as it may change slightly. The cabinets hang on a french cleat type system. I mounted two horizontal 2x4s on the wall with 3.5" lag screws into the studs in the wall - slightly countersunk with 1" fender washers so the top of the lag was below the surface of the 2x4. This allowed for many screws for mounting the hanging cleat into solid wood and not trying to use some sort of drywall anchors. The open shelf cabinet is wide enough to hit two studs but mounting the 24" wide single door cabinets would be a 1 or 2 stud for each cabinet depending on where they were in the order. The 2x4 method allows for a screw every 4" across the cleat. Once the cleat is mounted, it literally takes about 15 seconds to hang the cabinet on the wall. It took me about 3 hours to assemble 6 cabinets with a bit of sidetracking during. I think I said the first was slightly over 30 minutes - the second one was done in about 20 minutes. I was timing that one. I feel like the cabinets are substantial enough for general garage use. The mounting system seemed sturdy. The cabinet hardware proved to be tough enough to use an impact driver on. I did drill pilot holes into the 2x4s before mounting the cleats. The supplied wall screws are also phillips-head and the torque they accept is dependent on how hard you push the driver into them. I did not break any of them using an impact driver while driving them into the 2x4 but chose your pilot hole size accordingly. If the hole was too small (I worked my way up), the screw was very difficult to drive in and the phillips bit slipping in the screw head wasn't hard to do. Overall, I am VERY happy with the results of my install, the condition of the cabinets, the quality of the hardware and the value for what I paid. Time will tell on the durability - but I feel like for general home use, there should be ZERO issues with these cabinets. Additional note - the cabinets do have keyed locks - I saw in another review that you can't get them keyed alike. I'm sure you could probably find aftermarket lock cylinders to accomplish this if you really wanted to, but I took my keys and taped them under the shelf in each cabinet. I will NEVER lock my cabinets. They could probably be broken into with a screwdriver bending the door. The locks seem more like something to keep your small child out of your yard chemicals, but these are wall cabinets that should be higher than that small of a kid could reach anyway. These are not secure enough that I'd rely on the locks to keep valuables or say a gun secure.

This is the second time I have purchased these products. The first time was for my home garage which included 3 work benches and 6 wall cabinets. I was impressed with the quality so when I re did my shop at work I added them to it as well. Realize you have to spend some time assembling and mounting them but the end result excellent.

The Seville garage cabinets make excellent kitchen and bathroom cabinets. They hold quite a bit and are so sturdy. Easy to put together also. I like them better than real kitchen and bathroom cabinets. We purchased 3 of the smaller ones, 2 of the large ones with the wheels, and 3 of the in between ones. They hold a lot and are great for the price.

Put this cabinet in my shop. Was easy to assemble. Has a middle shelf that’s adjustable on height. Door lines up well closing. Has a key lock. Very satisfied with this purchase.

I have built an entire shop with these cabs at my other home and would purchase no other manufacturer. They manufacture the complete package, wall cabs, work stations and large storage cabs.

I purchased these cabinets for our garage. I was pleasantly surprised how easily these cabinets were assembled. The screws all fit and enough screws and parts were in each package. It is good to know that some companies still build products thinking about the end user. I purchased nine of these cabinets and two of the tall floor types. No problems at all. I hope Sams keeps products like this in their inventory.

These are really great, inexpensive cabinets. I had purchased some locally. Store ran out...needed more. One needs to have 2-1x4 x 22.5" boards to secure the cabinets to the wall in order to use the brackets supplied if using 16" on center wall studs. The only real problem I found was that since the cabinets were sent from CA. there was transet damage to two of the cabinets. I used a rubber hammer to mitigate the damage and placed damaged parts where they were not seen. Be better if not shipped so far and/or supplied instructions to carriers to treat as fragile.

Shopping for garage storage units for our new home. Shopped Craftsman, Lowes, Home Depot, etc., but nothing seemed to work at a reasonable price. Ran across these items, 77" workbench, 36" tall storage units and 24" wall cabinets, and my search was over. Initially I was a little worried about the quality and durability. After assembling these, I am no longer worried. Very well made, and puts all other choices to shame. The workbench has 12 total drawers and 500+ screws; plan on 5 hours to assemble. The tall cabinet and wall cabinets are much quicker; put those together in 30 minutes each, easily. Outstanding value. Plan on a trip to the recycle center when your assembly is complete. These come well packed, and you'll have cardboard and styrofoam like you wouldn't believe from each. But the packing does a good job protecting its contents. I had no damaged parts at all, which is unusual with a total of 8 different items in my order. My only issue with the wall cabinets is the wall mounts. Difficult to mount to the wall and have all line up level and straight. Otherwise, everything was great quality and great value, and end product looks unbelievable.

I'm real happy with my selection. I recently revamped my garage adding a tall rolling cabinet, 3 wall cabinets, the workbench and two roller drawer tool boxes. This is such a nice set up, I'm really happy with the end result and they're very well made, consistent in dimensions, bolt patterns, etc.

We bought two of these cabinets to go along with the other Seville cabinets with the shelf at the bottom. Those were nice...these are super flimsy. I'm not sure if its because they are one door spanning a large distance but they will need added reinforcement. Additionally one of our cabinets door weld was NOT WELDED. I'm having a terrible time trying to get a hold of someone to help. This is unacceptable. Customer service is horrible!