This cart is great addition to our garage. It holds lots of paint cans, cleaners and tool's behind closed doors and it rolls to any location for cleaning the garage floor. It was well packed, with good instructions to put together. It took approximately two hours to complete.

I bought 3 of these cabinets and noticed that after putting the first one together it was not square on all sides, I took it apart to make sure it was not my fault and found that the sides that were machine welded had a small amount of warp to them, out of the 3 cabinets (6 sides) 5 of them had this warp, I fixed this by placing the side, on my bench and flexing diagonally against the warp, I heard at least one weld pop on each side, I doubt if this impacts the strength of the cabinet and now it is perfectly square. Being square is only important if you are mounting multiple cabinets next to each other and want them to butt to each other perfectly. I still rate these cabinets at a five because of there appearance and quality, and just want to give a heads up to other perfectionists that want that perfect alignment.

The panels that form this cabinet are packed extremely well. No damage was noted even though the package was shipped to me. One thing on assembly, even though the top and bottom panels are interchangeable, the product logo plate is on just one. If you'd prefer the printing on that plate be right-side up, that panel should be the top panel. The door can be hinged on either side as both side panels will accept the door hinge screws. The assembled cabinet is very sturdy. Part of its sturdiness is likely due to the fact that it is designed to be assembled with screws and, thus, the panels must be fairly rigid from the get go. The screws/holes lined up perfectly - No adjustment, persuasion, line-up punches, etc. were needed. It just fit. All of the screw-receiving holes are tapped (threaded) from the factory so you simply line up the panel holes and, well, start screwing. There are no nuts to lose, drop or fiddle with. Just be sure to use the correct screws at the various locations. Seville was thoughtful enough to include a magnetic Phillips screwdriver to make it easier to get the screws started. One other tip, if you can, assemble the cabinet on a large table and, when possible, orient the panels so that the screws are vertical. (Threads down, not up!) Doing so makes it even easier to get them in place because you aren't working against gravity. If you wait until all of the panels are together before tightening the screws fully, you can square the cabinet up just before cinching everything down. Sam's had the best price, best delivery and the experience made me want to buy more when needed. Seville delivered a quality product. I added 2 plywood shelves and painted them to match. I used 1/2-inch plywood for the shelves and some 10-inch long, 2 x 6 blocks as end supports. The extra shelves sit on the bottom of the cabinet and on the factory shelf which I positioned midways in the cabinet. You can buy additional shelves from the manufacturer but the shipping interval and cost persuaded me to roll my own. Too bad they aren't offered with the cabinet because buying them separately adds almost 50% to the overall cost.

I first bought these cabinets a year ago for my garage. Love them. The quality is great, strong and sturdy. Powered coated finish. Better than most, great price for the quality. I bought more of them this year. I have different combinations of them. They are all wonderful. Buy them you won't be disappointed. You do have to assemble them, easy enough though.

This is a great product. Once it is assembled it is a strong product. It was fairly simple to install. it may seem overwhelming at first but i was able to assemble mine in fifty minutes. Loved it so much I ordered another. Then I order the cabinets that bolt on top of theses and now i have so much storage. I plan to order more of these soon.

I would recommend these cabinets to anyone that wanted great storage, hanging on the wall or setting up on a table, They are in my laundry room and hold all my washing detergent and Downy or whatever products you use ! Or in a tool room, durable and hold up well ! I love them .

I am a professional solo house cleaner, and I use this cabinet for storing my chemical cleaning supplies. It is sturdy and stays in place, but also easy to maneuver around, even when fully stocked. I highly recommend this cabinet, as it is versatile and useful for a wide range of applications. It is a two-person assembly job.

purchased to place in garage and hold small kitchen appliances. crock pots, tall and large pots, air fryer, insta pot, etc. no room in my kitchen. love opening the cabinet and seeing with easy access what appliance i need

Well built. Easy to put together - the instructions were really clear. They (I ended up buying 4) roll really well so if I need the space I can move them quickly. I do with one more shelf was supplied They can be purchased at the Seville Classics website for $49 but the added cost of supplying it in the box would probably be more like $10-15.

Bought these last month had them shipped to my house. No shipping damage. Great price compared to other metal. cabinets. Installation and assembly very easy.