Easy to put on spigot. Arrived missing one screen screw. Looks good; haven't had enough rain yet to see how well it works.

I have this in my rock garden against the house where the rain falls off house. I have no gutters so the water just pours into the barrel .

I bought two of these items and one was missing the parts. I called the number for the company that sells these within business hours and it stated they were closed, twice! This also does not come with any instructions.

All parts were there. Used the overflow port to another barrel. Had to drill out the hole which comes plugged std which is good, just need a drill motor and bit. The bands representing the steel on a real barrel were not painted. The 1st one I had was so I just painted some on it. Had a can of black spray paint and some painters tape laying around. No problem., looks like the otherone now. New model adds the intake port.

This is a good size and it's manageable and can be moved when empty. It's convenient that it has a flat side so it can sit closely up against the house or other location. In an heavy downpour, it's amazing how quickly this 50 gallon container fills!

This product does exactly what it's supposed to do. I took the screen off and made the round hole bigger so more water could pass through the screen. It fills up fast so have a backup plan. I intend to attach a large diameter drain hose to the top of the barrel. There is a molded in place to do this so I will cut a hole in the top and clamp on the new hose. This way, it will drain to where I want it to drain should the water level reach the top

I liked that the back is flat . It sits nicely against the house. The screen on top where the water goes in is not tight to the barrel, so I have put a line of clear caulk around them so the skeeters don't breed in the water. They look nice and give an old timey feel to my yard. I had ordered the oak which is a nice natural color, but the bands are the same color as the barrel. I thought they were black like they look in the picture.

The main reason for getting 4 of these was to prevent a constant pooling of water in the front and back yard caused by excessive rain at times. The barrels are light, easy to handle, and have brass faucets. The opening under the screen is not large enough, not in the correct position for most downspouts and are held in place by 6 metal screws which need to be removed to get to the faucet packed inside. Once you remove these screws don't re-install them until you are completely finished because after removing them 3 times they loose their tension against the screen. Use a sabre saw to enlarge the hole within 1" of the screen increases the in flow of water greatly. Use all of the Teflon tape on the threads of the faucet when installing it or the faucet will turn out on you when fastening a hose to it after a couple of times. Using a quick disconnect on the faucet and the hose makes using the barrel even better. Elevate the barrel higher than you think it needs to be makes it better to use and increases the discharge flow of water even better.

Arrived on time and barrel is sturdy, but you have to take it apart, turn it upside down to get to the parts you need to assemble it. A real pain when parts also could have been put in the box in a zip lock bag instead of fishing them out. Teflon tape to make spout water tight would have been a nice touch.

I've been building rain harvesting systems for awhile now. These barrels are convenient in that they are essentially all set up. They have some major design flaws though. First the opening at the top should be more toward or in the center of the top, so that water can flow into the low point. Also if you try to connect barrels for overflow, you have to seal off the front overflow opening, because it is at the same level as the overflow connectors. They appear to be designed for more of a one barrel system. They look good, and so far have held up well.