I like Seville Classics so much that I have completely ripped out all my cabinets and remodeled my kitchen with all Seville Classics cabinets and shelves.

It seems well built, but when I had to remove the 2 top door slides to attach the back and front,I found 2 screw holes on one of the 2nd slides stripped, with no way to make new ones.

Great quality product. Assembly instructions are great, but done right will take much longer than anticipated. I have outer unit finish and still have drawers to go.

Assembly is VERY much required!! There were over 220 screws. If you plan on rolling this to the area you are doing work and have several areas you have to work at, there's a good chance the screws will vibrate loose. I highly recommend using thread locker on all or most of the fasteners. The reason for this is that they are all Phillips-head screws. It's nearly impossible to get enough torque on a Phillips-head screw to prevent it from loosening. Some mild/medium strength thread locker will prevent this. However, that means you have to get it right the first time! With that said, if you are not confident in your assembly skills you should hold off on assembly and order some better fasteners. I recommend Torx-bit fasteners, but Allen-bit fasteners will work as well and better in most cases. One advantage of the hex-bit fasteners is that you can use the rounded-head hex-bits that allow you to tighten the fasteners at an ANGLE which will allow you to use a cordless driver/screwdriver/drill. Most of the fasteners are too close to a obstacle to tighten with a power tool. Many are too close to tighten with a screwdriver! Therefore, an Allen-head screw and a rounded head Allen-Head bit will allow you to tilt the driver and make speedy work of screwing in the 220+ screws!

Nice looking when assembled, but a long tedious process to get there. I bought two of these one had many defects and had to order parts from manufacturer still waiting on them. The other one took two people 7 hours to assemble. Sams had a good price on these is the positive.

I opened the box from one end, pulled everything out and then used the box as a low table to assemble. The instructions are excellent, if you don't try to follow the pictures. They reversed the view of the assembly part way thru. All the parts were well marked and you could probably put it together without instructions, but may have to back track as there is a certain order at times. When doing the large drawers just loosely tighten the screws until you get them all in and squared up. Easy to "rack" the drawer. Rolls very easy. The small screwdriver supplied is magnetic (most of the time, one unit I bought it wasn't) and a big help to start the screw in some of the tight spots.

Great cabinet but a challenge to assemble - needs 2 people.

Went together smoothly, looks great!

Great quality, easy to put together, everything fit so perfectly I was surprised

Well built cabinet. Rolls easily. Drawer slides are smooth. Carries the weight very well.