stainless hardware, easy assembly, nice looking but I think some of the threaded inserts weren't threaded right. tried to make sure I didn't cross thread any of them but two did anyway, and when that happens in these your in trouble. can't back it out cause the stainless screws are too soft. I would recommend these but run the screws through each threaded insert B4 trying to assemble,

I bet you the people writing bad reviews didn't have the metal anchors properly seated. Especially on the arms, they tend to fall out of place. Most of the bad reviews mention breakage where the chair back connects to the arms. If that happens, you're screwing metal into plastic and it's going to break. I used a small piece of tape to keep the metal anchor in place while I attached the arms. I verified that it's correctly anchored. We'll see if there's any breakage, but I think that solved it. To the manufacturer, some of the metal anchors slot into place, and especially with some force, line up correctly. But you're going to keep getting returns especially because the arm anchor in the back doesn't stay in place as you flip it over.

We bought two of these to replace some cheaper ones we had purchased at the Depot last year. After reading some of these reviews, I was a little concerned about the quality and assembly of them. HOWEVER, ours were easy to assemble and look great! I would note that one box did not come with instructions; maybe the cause of some problems others have had?? IDK but IMO, these are very good quality for this price point. Will defintely be buying more for the back patio!

GOODS: Made in USA, easy to assemble, comfortable, 10 year warranty IF you register it, gives an 800 number for complaints & replacement parts or hardware. BADS: It does NOT fold up for storage. One of the pics looks like it folds up, but is simply to show every angle of the chair. It does seem Deceptive, but I don't think it's deliberate. I was able to simulate their pic, but had to lean it upside down against a railing & stand on my head to take the pic. I called to get a replacement screw & nut, got a very pleasant girl & did mention the deceptive pic & suggested removing it.

We bought 6 of these for a firepit area. We loved they were large, comfortable and didn't blow around in high wind. Less than 3 years later and *ALL 6* have CRACKED IN THE SEAT. We aren't heavy people. My husband and I both weigh less than 200lbs. No reason to crack. Some of the arms also broke within the first year. Wish they would have lasted longer. We are about to purchase 6 more of another brand that are made of HDPE. Hopefully they last longer as spending another $600 is not ideal.

Bought 2 last spring. Have had them outside for a year now. Heavy winds, no problem they didn't blow away. Large seating area for my fat bottom and seem very heavy duty. I'm 6'3 and weigh 285, no issues at all with the sturdiness of the chairs. The cup holders are.a nice add, we use them a lot. The sun doesn't seem to have done any damage to the color or strength. Over the winter we left them out on the hill, uncovered. No issues there either. Very easy to fall asleep in these things. If you wanted to add cushions it would make them all the more comfortable. Well, after 1 year, I'm going back to buy 2 more for the back yard. Hope this helps in your decision making.

Have had 2 chairs 3 years at the most and within 1st year they cracked in the seat area both. We have tried to baby them along but it they are now to the point of not being usable. So sad, we had high hopes for these chairs, we thought we would get more than a couple seasons out of them bit they are heading to the trash.

We bought two of these chairs back in 2020 and they have held up unbelievably! Ours stay out all year long even in winter! Our first two were red and the color is still as vibrant than the first day we got them after 4 years. We just ordered 4 more for our fire pit in the midnight blue (nice color). I don’t understand the negative comments because my husband assembles them with no issues and raves about the stainless steel marine grade hardware (we live by the salt water). So to all the negative feedback I say you make no sense since we have now purchased 2 in 2020 and 4 more in 2024! We absolutely love these chairs. Ordered them on a Sunday and they were delivered by Fedex on Wednesday all iperfect packaging and no delays. I highly recommend these chairs ❤️

I was a little apprehensive about this from the negative assembly reviews, but I am pleased with the product. Getting the backing nuts to line up perfectly with the holes is critical for the proper assembly. I could see how someone could cross- thread the screws if not careful. You can use a slightly narrower Philips head screwdriver to line up the backing nuts through the screw holes, and then the threads align properly.

The best chairs for around pool