Bait n switch. In the store the chairs have cupholders that hide. Received fixed cupholders instead. Nightmare with customer service ensued. Then after we reached a settlement another problem arose. I had read reviews where people have problems with the hardware. I figured out what the problem is and how to avoid it!! The chairs are put together with stainless steel bolts and rectangular nuts. Some of the nuts are NOT threaded! If you don’t test all of the nuts before using them you could find yourself in a bad situation… I contacted Keter to tell them about their lack of quality control (as they could easily check the 8 nuts before sending the chairs out. They are too cheap to send extras, too cheap to check them… And then have no problem giving you a very very hard time to get a replacement NUT (including trying to blame you for not following directions!!!) But no, their unthreaded nuts are the problem and its very doubtful this defect made it to the owners attention. I Tried, but they have such a blame the customer attitude on the front end its very unlikely this reported discovery made it to the top! Too bad the head doesn’t know how the tail treats customers for their own defects! The chairs are made from molded components (halves that were pre-snapped together, but were not always snapped together fully, or would not stay snapped together. Another Quality issue and no remedy. Just cheapens the look a little.). Keter also refused to swap out the arms for the correct ones, they blamed Sams for the bait n switch.

These chairs fall in-between the flimsy molded chairs and the heavy, solid plastic lumber chairs. Easy to assemble. Cup-holder molded into armrest is an improvement to last year's swing-out design. Good color selection, but they need to add red and yellow.

We bought two of these to replace some cheaper ones we had purchased at the Depot last year. After reading some of these reviews, I was a little concerned about the quality and assembly of them. HOWEVER, ours were easy to assemble and look great! I would note that one box did not come with instructions; maybe the cause of some problems others have had?? IDK but IMO, these are very good quality for this price point. Will defintely be buying more for the back patio!

The "Keter Everest Adirondack Chair" is a decent budget priced Adirondack style deck chair. I received the shipped pair of 2 chairs lightning quick, literally on my porch 1 day after ordering online. Each chair is knocked down in six pieces: two legs, two armrests, a seat, and a back. Plus a bag of hardware consisting of 10 square nuts and 10 machine screws. Assembly is easy, consisting of sliding each nut into a specified slot in the plastic part, which is attached tightly by a paired screw. Assembly took 15 minutes if that with only a Phillips screwdriver. The attachment points and the way the hardware is used in assembly seem fairly durable. The chair is as comfortable as any other Adirondack style chair. The one downside of this chair is very lightweight construction. The photos of the chair in the ad appear to show solid plastic "boards" of some thickness which resemble wood, but in reality, these pieces (all parts of the chair) are hollow plastic. Considering that the listed shipping weight is 25 lbs, at that weight the chair can't be solid material. Therefore the chair is fairly rigid but has a bit of bend when placed under weight/stress. This chair is really a step or two above the molded one piece Adirondack chairs that are widely sold, and for solid material you'd likely need to spend twice as much. At the price it's a fair tradeoff, and I hope to get 5 seasons out of these.

Absolutely LOVE these chairs. We bought 6 over 2yrs ago and they have held up great. They accommodate larger people and are super comfortable. They are kept outside all year long and have not faded,cracked or warped at all. They have constant use from teenage boys around a firepit and are very easy to clean. Would highly recommend these as a solid investment!

Okay, so this is not going to match what you get if you pay $200 a chair, but it is an excellent product for at this price point. Since it is new, can't speak to durability, but for looks, construction and ease in assembly, haven't seen anything come close. In that regard, saw a couple of reviews about problems assembling, but as someone who has put together dozens if not a hundred or more Chinese products, this has the best assembly scheme I have seen. It uses a bolt and nut combination that allows user alignment if pre-drilled holes in legs and arms if pre-drilled holes are slightly off from the factory. Cannot see how someone would have run into trouble assembling these.

A picture on this websites dropdown shows this chair folded in half for storage....They DO NOT FOLD!!! Happy with the chair but unless someone reads all the questions previously asked (which I did not do) it is deceiving to a buyer. The fact that it showed this chair folded was one of the reasons I chose it. Sam's needs to remove that picture from their website.

Chairs seem to be solid. But we ordered online and the next week, they were in the local Sam's for $20 less. Neither the local club nor the online order desk would price match. They said we would have to completely disassemble, repackage, bring them into the club, get a refund and then re-purchase at the club. They have our electronic receipt, etc., so it is incomprehensible that they cannot just do this without a waste of time.

I was reading the other lower star reviews about assembly and was worried about the bolt comments...if you properly seat the square nut there are zero problems screwing the bolts in! ZERO! Assembly is incredibly easy!!! I saw the comment that they were cheap plastic...no they are not! Max weight is 350lbs on box, I'm 260 and it's solid!!! These are defintely worth the price, I saw similar for sale at 225.00!!!

I purchased 4 of Keter Everest chairs, the chairs are great, very strong and put together with all stainless steel fittings. Very simple to put together, it takes about 15 minutes per chair. These chairs are rated for 350 pounds. These chairs will last a long time for sure. Thank You for a great quality product.