Assembly is VERY much required!! There were over 220 screws. If you plan on rolling this to the area you are doing work and have several areas you have to work at, there's a good chance the screws will vibrate loose. I highly recommend using thread locker on all or most of the fasteners. The reason for this is that they are all Phillips-head screws. It's nearly impossible to get enough torque on a Phillips-head screw to prevent it from loosening. Some mild/medium strength thread locker will prevent this. However, that means you have to get it right the first time! With that said, if you are not confident in your assembly skills you should hold off on assembly and order some better fasteners. I recommend Torx-bit fasteners, but Allen-bit fasteners will work as well and better in most cases. One advantage of the hex-bit fasteners is that you can use the rounded-head hex-bits that allow you to tighten the fasteners at an ANGLE which will allow you to use a cordless driver/screwdriver/drill. Most of the fasteners are too close to a obstacle to tighten with a power tool. Many are too close to tighten with a screwdriver! Therefore, an Allen-head screw and a rounded head Allen-Head bit will allow you to tilt the driver and make speedy work of screwing in the 220+ screws!

This is a nice looking, sturdy chest with drawers, but don't buy it unless you are self-quarantining and have plenty of time to waste. I knew this was going to be a big project when I opened it and found - yes - 216 screws!!!! However, they include a screwdriver for your convenience. I tried my cordless but it really doesn't help much. Also, you must be careful - the screws strip easily and you can't tighten them until each drawer is assembled, forcing you to go around and tighten every screw AGAIN. For the price, it should come assembled. Come on Sam's Club - Up your game!

Nice looking when assembled, but a long tedious process to get there. I bought two of these one had many defects and had to order parts from manufacturer still waiting on them. The other one took two people 7 hours to assemble. Sams had a good price on these is the positive.

I've had this for a couple years but haven't ever really been happy with it. The biggest frustration is the drawers seem a bit flimsy and sometimes don't close fully. I've replaced it with a much sturdier tool chest from a home improvement store that sells for much less.

I bought this UltraHD® 6-Drawer Cabinet to match the existing Seville granite color steel garage storage unit I have. I had a professional handyman assemble it. All parts had identifiable parts labels and the instructions guided him to assemble it with relative ease. This small cabinet in weighty at about 150 lbs. The wheels are super beefy and the unit locks. I chose this unit because of the 6 dr capability of organizing different tools and garage needs.

Very nice drawer unit. smooth drawers and good storate

Great quality, easy to put together, everything fit so perfectly I was surprised

This entire line is top notch. We have many in daily use at my work and the bearings hold up well.

Well built cabinet. Rolls easily. Drawer slides are smooth. Carries the weight very well.

Went together smoothly, looks great!