I have over 350' of gutter running around my house with 7 downspouts feeding a large cistern which supplies all of our water needs. Keeping leaves and pine needles out of the gutters has been an ongoing problem for nearly 30 years. The original owner of the house had installed 1/4" mesh plastic screen which was not effective at all in keeping debris out of the gutters, so I removed them and relied on periodic trips to the roof with a leaf blower to keep the gutters clean. Pine needles are a huge problem here and it looks like this fine mesh stainless steel gutter guard may be able to keep them out. I ended up buying 360' (three 92' plus three 28') and had one 4' piece left when I finished. This appears to be a very good quality product and installation was relatively easy. I used the supplied self tapping screws to secure all panels as we have a lot of wind here and I was not sold on the long term outdoor durability of double sided tape. The biggest problem I had was with inside corners, but after doing a couple I developed a process that seemed to work pretty well. Now that the job is finished I am waiting to evaluate how well it works long term.

We installed the gutter guards yesterday. My hubby purchased longer screws before they arrived. He did use the longer screws that he purchased. He is in his late 70's and had no problem with the installation. He had a nephew help him. The installation was very easy and fast. It took almost 3 hours to do our entire home. Was delightfully surprised on ease of installation !!!!! GREAT PRODUCT NO MORE LEAVES

For years I have climbed on my roof to blow out the leaves and other tree debris 3-4 times a year. I've tried a couple of other products with mixed results and did not want the expense of one-piece gutter guards. The reviews of this product were good and looked like something I could install myself. I've now completed around 1/3 of my gutters and am pleased with the quality of the product and how it is relatively easy to install. I used the self tapping screws (supplied with my order) to secure these guards. You can install using the adhesive tape option but I wonder if over time the adhesive would not hold up. It is tedious in that you have to do a section, come down and move the ladder over and then climb up to do the next section. The hardest part of the installation is when you come to a eve in your roof line and have to do special cuts and bends. That slows down your installation and probably accounts for over 50% of your time. If there were no cuts to make I would probably be finished with the whole house by now. We're in the middle of my oak trees shedding the little "tree worms" and they have not stuck to the sections I have installed. I'm sure in the future there will be leaves that will get caught in the sections where these guards meet, but it should never affect the water flow coming off the roof. Overall, very pleased with this product.

I had no problems with the installation, it was just like it was described in previous reviews. The materials are good and sturdy. We've had rain a couple of times since we installed it and the gutters are working great! We look forward to not having to get on the ladder and clean out the gutters!

I Installed these on my home by myself in 4 hours and it rained almost immediately after I finished. They work well except at the inside corner (valley) of roof. I ordered the recommended rain diverter and hopefully this will take care of the problem. A little disappointed in the shipping cost of $10 for a $13 diverter though

installation was a little more difficult than expected. trimming with snips still required supplemental work with a hacksaw. the overlap between sections created a little bump that was hard to smooth. bending to maintain a dip in the screen slowed the installation. It took about 30 minutes per section.

I bought this kit for a small commercial building and installed it in less than two hours. Easy to bend as the instructional video showed and I used the provided self taping screws. Best gutter guard I have installed and will be using Gutterglove on all of my next projects.

I recently bought and installed this stainless system for my upstate NY ranch style home. Pine needles have been my biggest challenge and I tried the inexpensive plastic home center covers which did ok until the glued on screening tore away. These gutter covers looked to be just the ticket if I could install them myself. Earlier this week, I installed them on a 30 foot section which included an inside corner. I had to bend the back of each panel downward for the best looking result. After trying the method that came with the instructions, I decided to make a simple homemade brake. I screwed two 4 foot, one by two inch boards, to a piece of plywood just far enough apart to slip in a section of gutter guard and bent each piece with ease. At 72, my hands have lost much strength, this made the bending effortless. I also used a small angle grinder with a metal cutting disc to make any cuts needed. This also proved easier than tin snips for me. Once I got going, it took me about 3 hours to complete the section and I can’t wait for another decent day to finish the job. We had a medium shower this morning and they drained perfectly. I am waiting for a deluge to see if there is any overflow like I had with my plastic guards. One more thing I will mention. It appeared that I was using the fasteners provided at a rate where they would not finish the job. I emailed the company and more are on the way, no charge. My gutter cleaning days are over! A great product!

i purchased the stainless steel gutter guards from sam's club and received them and put them up in about 2 hours time not including getting ladder and tools. the gutters were easy to install and the video instructions helped greatly. all i can say is wow, all the hardware was in the box as stated, self tapping screws and bit. it has rained so hard in the past 2 weeks since i've installed the gutter guards and so far my gutters haven't even overflowed. thanks gutter guard.

I purchased the gutter guard kit after reviewing all of the available gutter guards. Sam's Club offered the best price that I found. I installed a 100 feet of gutter guard in about 1.5 hours. I installed on the front of my house from a ladder. I installed on the back of my house from the roof. Both were equally easy to do. I was impressed with how easy it was to install. Instructions are easy to understand and make installation a breeze.