I just got these and installed them on one side of my porch in about 10 minutes, maybe less. I put them all in place, then put 2-3 screws in each. I chose not to use the adhesive strips that come on each piece. For corners and ends, they are easy to cut, but as the directions say, it is easier to bend the rails and then snap them by bending back and forth and then cutting the screen as desired. I used my bench vise to bend them 90 degrees, then took them out and bent them back and forth a few times by hand and they snapped easily and cleanly. Then I used a tin snips to customize them for my ends and corners. Super easy. I can't wait to put the rest on, especially on one end of my house where the neighbor's huge tree drops a lot of stuff on my roof and in my gutters. So far I think these are great! :o)

I just installed 132 ft of Gutterglove stainless steel gutter guard on my 3-car garage and was so amazed at how easy the installation was. The product is so well made with high quality stainless steel and aluminum material that I expect the gutter guard will last for ever. I have a large pecan tree hanging over the garage and the leaves are just beginning to fall and I watched with joy the leaves simply blowing off the gutter guard. I am so satisfied with the Gutter glove quality. I am a happy customer!!

I am a 52 year old woman and I installed these myself. My husband only made the cuts. The installation was straight forward. I just needed to be patient and use a little finesse at times at the hard spots but they are up and working great. I just cant believe we waited this long to finally put something up! No more getting on the roof with a blower to clean out the gutters. Our house is surrounded by mature trees so these are a life saver

Just installed 180' of SS Gutter Guard last weekend and all went well having just beat the snow by one day. Instruction were very good and easy to follow. I did have the gutter installation guys install the Gutter Guard in 2 sections that were too high for my ladder. They claimed to know all about this SS screen product but corners that they did were done very poorly. I would advise explaining in detail to the workers, how to do the work in accordance with instructions. For me, the only slow part of the job was positioning the screen under the roofing valley tin. Since my gutters were new I exposed the tape for fastening. Then because I had doubted about how well the tape would adhere in Dec. in MN, I added a screw at each end. Also, since our roof has a high pitch, I built a make-shift jig so that I could bend all the sections equally so achieve correct slope. I did find it easier to cut the aluminum rails with a jig saw and the screen with the tin snips. I also trimmed a 1/4" square off both ends of taped rail so they could be butted end to end when installed. Only complaint. As mentioned by someone earlier, most of panels required some minor straightening at each end due to slight damage during shipping. As suggested, some foam padding in box might solve problem.

I'm in the process of replacing the shingles on my garage roof and I had the solid style gutter guard with clips and thought there had to be something better out there. I researched a lot of brands and settled on this one and look forward to installing them.

After extensive research I found that Stainless Steel Gutter Guards to be the best product on the market. During my research I discovered that Sam's Club offered the best price. They arrived at our house in a timely fashion. Installation was easier and quicker than I expected . I highly recommend Stainless Steel Gutter Guards and if I were to need gutters in the future Stainless Steel Gutter Guards will be my only choice.

I have over 350' of gutter running around my house with 7 downspouts feeding a large cistern which supplies all of our water needs. Keeping leaves and pine needles out of the gutters has been an ongoing problem for nearly 30 years. The original owner of the house had installed 1/4" mesh plastic screen which was not effective at all in keeping debris out of the gutters, so I removed them and relied on periodic trips to the roof with a leaf blower to keep the gutters clean. Pine needles are a huge problem here and it looks like this fine mesh stainless steel gutter guard may be able to keep them out. I ended up buying 360' (three 92' plus three 28') and had one 4' piece left when I finished. This appears to be a very good quality product and installation was relatively easy. I used the supplied self tapping screws to secure all panels as we have a lot of wind here and I was not sold on the long term outdoor durability of double sided tape. The biggest problem I had was with inside corners, but after doing a couple I developed a process that seemed to work pretty well. Now that the job is finished I am waiting to evaluate how well it works long term.

We purchased the gutter guards and received them FedEx in 6 days, sooner than we expected. We installed 1/3 of them late yesterday and completed the installation this morning. Installing the guards was very simple, just use the screws provided and attach to the edge of the gutter. The opposite edge is tucked under the roof shingles. We used tin snips to cut off the excess at the end. The view from the street is very neat, you just see the edge of the stainless steel. We are very pleased with this product.

I installed approximately 88 foot on Thursday July 19. It took me about 2.5 hours. It was fairly easy to cut with my tin snips and a hacksaw. I did not have any problem lifting the shingles to install the top edge of the gutter guard under them. I used 2 of the furnished screws in each guard. I used the first box I bought for an outside garage and part of my house. I will be ordering more to finish my house. During the past 3 days we have had almost 3 inches of rain and the gutter guards worked perfectly.

I bought these 5 years ago and we sold our house right after. I did not install them but brought them with us to our new house. As our remodeling is nearing completion I have begun to install them on our new gutters. They fit perfectly ( I bought the 5” size and used them on 6” gutters). Not sure I would like the way the 6” size would look due to having to hump them up to fit. They go on so easy and fast.