I got two of these to replace different sheds "Gone with the Wind" that was Hurricane Ian when the entire porch, under which they sat, took off. I don't know yet how the new ones will hold up to the Florida weather and tenants piling stuff inside, but they look good, and seem well constructed for a resin shed. There are metal side and roof supports, and interlocking walls. I'll be anchoring them, though, with tie downs because just bolting down the base isn't going to keep the roof on. If it takes off, so will the sides. My son and I (71 yrs) assembled the first one in about 3 hours and then second one in about 2 (and we are still speaking!). Recommendations: Make sure the base piece joints are tightly together on both ends before you start on the walls or everything will be off. Get a low torque battery powered screwdriver (drills are too powerful) to save time and maximize the benefits of teamwork (I caught two from Skil on sale and they were great!). Also, assemble the clamps on the roof struts on the ground to save overhead work. Any metal-to-metal assembly will need manual screwing and pressure to complete. The hardest part of assembly was securing the bolts that connect the roof to the side supports. You need a slim 7/16 socket and anything else you can find in that size to help and it's still going to take time and patience. It would be nice if Suncast developed a tool set to make this easier. Don't try assembly without a helper. It will be brutal. Don't try to assemble this outside on a windy day. You have to get the sides to stand up in sequence. Even with two people, you can't install one side while another person tries to hold up more than 2 sections in a stiff breeze. They will take off from the base.

Great storage shed for the price. Definitely install it on a pad. One step (18a) was very difficult, installing a metal support into each side panel. Had to improvise by banging it down with a hammer using a wood block. Best to do this step early before attaching the panel to the floor. All other steps went well.

We had free delivery on our shed. We were able to track when it would be delivered. We received an email the morning it was delivered. The delivery driver was able to place it in our garage since www were home. We didn’t have any damage and it went together easily. The instructions are easy to follow.

This shed is a good value for the size and quality. They sent a single guy for delivery, and he struggled to get it off the truck. Assembly was straightforward, but putting up the walls was more difficult than it first appeared. You definitely need a second person for the walls. Assembly took me around 6 hours or so, with help from my wife. Shed quality and appearance are good, but it is clearly not waterproof, particularly around the corners. We will not be putting anything like cardboard boxes in this, as they are sure to be damaged in a strong downpour. Overall, we are happy with this shed, which was cheaper to buy, faster to deliver, and easier to assemble than a wood shed.

We ordered two sheds. They have 365 screws, each, so it does take awhile to build (3-4 hours, each), but the sheds are really nice looking and seem very sturdy. It hasn't rained yet, so can't tell you how they fair in the rain, yet. Overall, we are really happy with how they look, their capacity, and the sturdiness of the shed. We aren't giving it a 5 star because a few of the instructions were a little vague which made assembly take longer than it should have and we aren't sure how it holds up in rain yet.

The shed is amazing but the drawback is nowhere in the description does it tell you you must anchor it to either cement or a platform base of certain specifications. If you do not anchor it it voids the warranty. It was a small byline in the pre-assembly instructions. After spending $850, it would have been nice to know that prior to my purchase.

Suncast 7’x7’ Modernist storage shed is just fine if: Your base is perfectly level, you have 2 able adults, you have low torque battery operated screw drivers, you have 2 4’ to 6’ ladders , you have sufficient area around the shed back and sides sides - 2 feet is good, the shed is above water sources, area winds do not exceed very much and probably not last you add a good flooring. I will add this: Suncast is selling this shed at several retailers. Each retailer has their specific color pattern. Pricing varies - $900.00 to $1900.00 for the same shed.

Good shed for the price. It is spacious 7x7x7. It can be a problem assembly. You definitely have to assemble on a hard flat surface. Sliding the walls into the floor is the most difficult task. I think these sheds are the best on the market for under a $1000. I own 2 of them.

I assembled this by myself in a weekend, it took me approximately 10 total hours. I could have cut it down to 8 if components lined up better. The first issue was the gaskets for the windows, they would not stay in the slot they were cut out for. I tried silicone lubricant, and water. This was one of the first steps, and delayed any progress by two hours. Soaking the gaskets in water seemed to help a little but they still did not fit, I had to place the window on top put a few screws in, use my knife to adjust the gasket and repeat. The second issue was the metal side rails, I had to use my vice grips to make them fit. The slots they are designed for seemed to be too narrow. Take your time and it will work with a little fabrication. I bought this shed to replace a wooden one that was destroyed in a tornado, I had a flat concrete slab to work with, doors open and close smoothly no issues. We had some heavy rains the day after I finished this shed. Not a drop inside. I would have given this 5 stars if assembly would have gone smoother. I'm pretty happy with this shed so far and hope it will withstand the unpredictable mid west weather. Not sure how secure this unit is, I feel if I pull the doors as hard as I can, or kick the shed I would be able to get inside. Regardless I don't think any shed is theft proof?

The unit came packed very well. I unloaded all the parts so I could get it organized. Found the back sides and front parts. Making sure it was all there. The instructions LACK in part labels. You have to guess what part you need to use. There was enough parts so I didn't come up short on the screws. Just remember, it will take two people to fit the parts together. If they would just label the parts better would save 30 to 45 minutes trying to Identify the rails.