Assembling the cabinet was tedious but not difficult. The parts are organized and numbered as referenced in the instructions. It's a very good cabinet and perfect for my garage storage needs. The wheels are heavy duty and very convenient. This storage cabinet is a bargain at Sam's price.

Great cabinet! We purchased this cabinet for my husband's office/reloading room. He stores his reloading supplies and equipment on the shelves. The shelves can hold a lot of weight without sagging. It's a very attractive addition to the room! We will purchase another for the garage!

Great cabinet, good instructions. One thing you have to do is when putting in the screws, put them in by hand as far as you can get them before using a screw driver to tighten. If the screw is the slightest bit crooked, it will strip and you won't be able to tighten the screw.

This is a great cabinet. Very solid, great quality and easy to assemble. I got it on sale at my local Sam's and just a few days later there was an ad for a similar one for sale from a big box store that starts with an H and ends with depot. It wasn't even stainless steel like this one and their sale price was more than the full price from Sam's. I've always felt I get my money's worth with my Sam's membership.

The panels that form this cabinet are packed extremely well. No damage was noted even though the package was shipped to me. One thing on assembly, even though the top and bottom panels are interchangeable, the product logo plate is on just one. If you'd prefer the printing on that plate be right-side up, that panel should be the top panel. The door can be hinged on either side as both side panels will accept the door hinge screws. The assembled cabinet is very sturdy. Part of its sturdiness is likely due to the fact that it is designed to be assembled with screws and, thus, the panels must be fairly rigid from the get go. The screws/holes lined up perfectly - No adjustment, persuasion, line-up punches, etc. were needed. It just fit. All of the screw-receiving holes are tapped (threaded) from the factory so you simply line up the panel holes and, well, start screwing. There are no nuts to lose, drop or fiddle with. Just be sure to use the correct screws at the various locations. Seville was thoughtful enough to include a magnetic Phillips screwdriver to make it easier to get the screws started. One other tip, if you can, assemble the cabinet on a large table and, when possible, orient the panels so that the screws are vertical. (Threads down, not up!) Doing so makes it even easier to get them in place because you aren't working against gravity. If you wait until all of the panels are together before tightening the screws fully, you can square the cabinet up just before cinching everything down. Sam's had the best price, best delivery and the experience made me want to buy more when needed. Seville delivered a quality product. I added 2 plywood shelves and painted them to match. I used 1/2-inch plywood for the shelves and some 10-inch long, 2 x 6 blocks as end supports. The extra shelves sit on the bottom of the cabinet and on the factory shelf which I positioned midways in the cabinet. You can buy additional shelves from the manufacturer but the shipping interval and cost persuaded me to roll my own. Too bad they aren't offered with the cabinet because buying them separately adds almost 50% to the overall cost.

I bought 3 of these cabinets and noticed that after putting the first one together it was not square on all sides, I took it apart to make sure it was not my fault and found that the sides that were machine welded had a small amount of warp to them, out of the 3 cabinets (6 sides) 5 of them had this warp, I fixed this by placing the side, on my bench and flexing diagonally against the warp, I heard at least one weld pop on each side, I doubt if this impacts the strength of the cabinet and now it is perfectly square. Being square is only important if you are mounting multiple cabinets next to each other and want them to butt to each other perfectly. I still rate these cabinets at a five because of there appearance and quality, and just want to give a heads up to other perfectionists that want that perfect alignment.

I would recommend these cabinets to anyone that wanted great storage, hanging on the wall or setting up on a table, They are in my laundry room and hold all my washing detergent and Downy or whatever products you use ! Or in a tool room, durable and hold up well ! I love them .

This cart is great addition to our garage. It holds lots of paint cans, cleaners and tool's behind closed doors and it rolls to any location for cleaning the garage floor. It was well packed, with good instructions to put together. It took approximately two hours to complete.

I first bought these cabinets a year ago for my garage. Love them. The quality is great, strong and sturdy. Powered coated finish. Better than most, great price for the quality. I bought more of them this year. I have different combinations of them. They are all wonderful. Buy them you won't be disappointed. You do have to assemble them, easy enough though.

Dented all to heck. I have purchased this item before, about 5 years ago. Both were dented and bent badly. The last one, I received some replacement parts, but how do you dispose of the broken pieces? They are 6 feet long and need a dumpster. Worse yet is that there is only one option to fix, and that is to call the company. They DO ship out the parts with only a request for a pic of the bent piece. So they are pretty good. But it takes 2-3 weeks to receive. Otherwise, the unit is fine. Well-engineered, and sturdy. Drawers are sticky for a while, but they are designed this way since the item can be rolled. Over time, they loosen up perfectly.