I built a new garage and wanted a couple of good benches. These are very heavy duty and will hold 2000 lbs. The only problem is that the wood top is so nice I don't want to scratch it up, so I put cardboard on the work surface. I got the Red legs. It took about 20 minutes each to assemble. Real easy to put together, I used an impact driver.

We had a little trouble with some of the shoulder bolts connecting the cabinet sides together however we purchased some straight bolts and this seemed to work fine. See picture. The door brackets however need to be addressed. Sometimes the holes are drilled too high on the edges. A few times they would bend the door. We had to put the one bracket in a vice to take the bend out from it. The bumpers needed to be counter sunk deeper. Because the screw heads were sticking above the rubber. Great packing nothing was really damaged. a couple of dings here or there but other wise everything was intact. Thank you for a great product. We are using these cabinets in doors for our gaming storage needs.

I love this cabinet so much that I have 6 of them! I have them in my garage space and they are very neat, attractive, easy to clean and very easy to move. They hold a lot and are extremely sturdy. Great job Seville classics, your products are amazing!

I bought 3 of the UHD20143B cabinets and the companion upper extension cabinets, along with a couple wall cabinets and a UHDK20261B Mega cabinet. Missing parts, soft metal hardware that strips out, flawed paint, bent panels due to poor packing, poor hole placements necessitating drilling to correct, instructions not written in clear English, bad or vague illustrations of each assembly step -- you will get NONE of that with these cabinets. They are not just engineered, they are engineered very, very well. With decades of experience in the construction and telecom engineering trades, I have assembled many kits and products. It is extremely challenging for a company to have quality tolerances so tight that 10 or more punched holes in a panel will line up near perfectly with the threaded screw inserts. Yet, Seville Classics did this consistently with the cabinets that I purchased. Mine were made in Taiwan, but designed better than any imported or domestic product that I have ever assembled. The cabinet assembly is not 'difficult'- and with attention to detail- a novice could assemble these. Follow the instructions closely and rely on the excellent illustrations. I found that carefully lining up the edges of the panels during each assembly step just made everything line up near perfectly. One caveat: The only area where improvement is clearly needed is with the door panel connection part that ties the larger cabinet upper and lower door panels together. While I did not have to drill any of the holes out wider, it was close on a few cabinets and was my only component challenge with the product. Still, every box had a few extra screws, and was packed/protected so well, that I can't hold the fitting of this one component against them much. The cabinets are sturdy, beautiful, and (unlike MDF), these cabinets should last you a lifetime. With that in mind, these cabinets are an outstanding value and you will be pleased with your purchase.

The plans looked straightforward and relatively simple. But, as I went further in the assembly, some of the pictures didn't really match the parts and/or the view was not where it should have been to eliminate any confusion. We finally got it done and was pleased with the results. Nice heavy duty cabinet.

Once I filled up this unit it RACKED on me. It's not as well built as one might think. I did fill the unit full with paint, stains, cleaner materials, etc. The doors were even when it was empty, but once I filled this unit up full, I noticed the doors were NOT even at the top and bottom. This unit RACKED on me once I filled it up. Would NOT buy this unit. Save your money if you need to store heavier items. This UNIT is NOT for more heavy duty items. I wish I would have gone a different direction.

I love this unit so much my wife even wants one for her classroom now. Well made, easy to assemble, sturdy, hardware is very nice (not cheap at all) they really spent some time engineering the unit so it's strong. There are actual machine threads to screw into so you won't strip out anything. Love it, would buy again in a heartbeat.

It was missing a screw. It had a dent in it. It's not as sturdy as I expected it to be. But I bought it for the garage and it will do what I bought it to do. It's functional. It's very Important to fasten it to the wall. It looks good for the garage.

i now have the 60 inch extra wide cabinet and this 36 inch rolling cabinet. it may seam flimsy as you are assembling them, but have faith and finish assembling it. They really thought out the reinforcements, making these cabinets quite strong after fully assembled. my 60 inch cabinet holds hundreds of pounds of tools per shelf and it hasn't shown any signs of fatigue. not to mention they look great all together.

I have 6 of these, the matching Mega cabinet plus wheels, the huge matching workbench with drawers and cabinets and small rolling workbench cabinet with drawers. The entire set has made my garage what I always wanted it to be along with some tracks and slatwall for other tools and bikes. The best part of these cabinets is they hold a ton of stuff at 27 cubic feet each and since they roll (very easily even when loaded), my garage is fully modular - so I can rearrange it in a snap whenever I might want to do that, and even roll them into the tandem garage when I want to park an extra vehicle in there. Great stuff, easy to put together just remember LOW TORQUE if you are using a power drill.