I got this yesterday at sams club that is closing down , today I put it together I took my time and it was the easiest thing I put together. My wife was proud of me not swearing because I took six hours doing it. This was a well built bench and glad I finally decided to get it, Just remember it takes three to four hours to put together.

It was a breeze to put together. Time consuming yes, but not at all difficult.The instructions are very clear. My husband and I spent about 3 hours putting it together and much of that was just reading instructions. It is my kitchen workbench. No more pulling appliances in and out of cabinets. Love it!

Nice looking bench providing you have help and lots of time. Directions were poor and found several mistakes.Several bent/misaligned parts plagued the build. Need small hands to build bench, especially in first several steps. assembly of drawer were time consuming and tricky. Several parts in this step were bent and directions were poor. Drawers work ok, but don’t slide easily. Would recommend because of low price and functionality. Have someone mechanically inclined help.

Like it very much

I really like this workbench. It holds all of my excess tools and provide a lot of storage area. It features metal 'pegboard' sides and has ball bearing drawer slides. Although I will not use the mobility of the unit, it does have nice wheels. Assembly will take a few hours and everything is very well packaged in two large heavy boxes. Keep the cardboard box to assemble this unit on and not scratch it. The workbench wood surface is so nice I don't want to scratch it but it will look used as time progresses. The top is thick heavy hardwood and will last a long time. Everything is good on this unit but you will have a lot of styrofoam pieces to get rid of. How did they manage to get all this stuff in those two boxes?

I was disappointed when the top of the cabinet did not fit properly. I tried everything I could to get it to line up properly but it turns out the top was about 3/4” too short on the width and I had to re-drill the frame in order to get the bolt in. There is now a 3/4” gap between the butcher block top and the frame edge that I faced to the back of the cabinet to hide.

Took some time to put together but really is a great tool box for the price. It took me about 3 1/2 hours to unbox and assemble. It was quite easy to do by myself, just needed a little help flipping it over after installing the casters. The metal is not the thickest out there but it definitely does the job.

The assembly took 5 hours and extreme frustration. The screws in the walls that hold the drawer gliders took the longest. They are little screws and you can't see most of the holes those 22 screws go into. Even where you can see the holes you can't get your hands in there to hold the screws, and the screws wouldn't stay on the provided screw driver, what saved my Bacon was my own screwdriver that would hold the screws straight until I got it started. But even then the screw would fall off and I had to try again about half a dozen or more times for each screw. Certainly the designer is worthy of capital punishment for such a cruel design. There's no way to hold the screws to get it started and one has to put there hand over the slider and stretch there fingers to turn the screwdriver. Once the frame is together, the drawers and other items are easy, just monotonous. There's a total of 265 screws, but the 22 that went into the sliders took longer, and were more frustrating than the other 243 screws. My suggestion is to find a Phillips head screwdriver that will hold the little screws straight for you to get them started and tightened. My problem was each time I tried and missed the hole I could not see, the screw fell off and I had to start again. And those little screws are the reason I only gave it four stars. They look very cheap, weak, small screws for the job. My grade 5 screws look of higher quality than these, and I know grade 8 is for tractors and stressful applications, but I want this to last. It looks great, but if the screws holding it together are weak, then how long will it last before it breaks apart??? So 0 stars for assembly, and 4 stars because assembled it looks great, the drawers slide and fit well. The lock may not even be good enough to keep honest people honest🤷🏻‍♂️ It's another weak part of the system. The work top is top notch solid wood. But if you have lots of patience, and can have 22 screws that are almost impossible to even get started fall off and restart several times and not blow your top, then I think it will be a pretty good tool cabinet, work table for you. It's about 250 lbs and took three of us to load it. But I sent my helpers home during the effort to try to attach the sliders to the back wall and front frame, because they couldn't get their hands in there or see anything and were so frustrated they weren't helping. Helpers aren't needed except for unloading and turning it over, and they weren't there for that, so I used all of the packing materials and some other foam I had and put it on the drawer side in kind of a mountain on each end and in the middle. I locked the wheels. Then I laid it over on the packing material hill I just built. Once laid over on it, I could get my hands under the side to tip it now on the side of it's wheels resting on the packing materials, then lifting with my legs I was able to lift the top setting it on all four wheels. Then I started assembly of the drawers, etc .

I love the work bench! It wasn’t hard to put together and I didn’t have an issue with the directions. I use it every day in my garage. I would give it 5 stars but when I picked it up from Sam’s Club 2 employees helped put it in my car and they broke a piece off in the back of my new car. I know it was an accident and there is nothing to do about it. Just be careful when you haul it home. It is really heavy.

Very good deal, lots of parts but easy to assemble. Delivery was good, no damage. Thick wood top, nice looking outside, again instructions and assembly was perfect. Great deal, I would use this as a kitchen island if I was going for that look, almost too nice fir my garage.