After buying the 6 foot table, the 4 foot table, and the work bench, I thought, inspite of the reviews of damage, I would give it a try. I found the needed tools for assembly to include the following: 4 pound dead blow hammer, table saw, chop say, multiple C-clamps, small (8 oz) ball peen, medium (16 oz) ball peen, multiple pieces of oak or maple scrap. After unpacking the jig saw puzzle and finding the first damaged panel, I spent 2 hours cutting small blocks of oak to use, in conjunction with a variety of clamps, to press pieces back into a reasonably straight condition. Once generally straight I used the ball peen hammers, and bucking bars to make the parts straight. Bear in mind, I inspected the boxes upon arrival. The was no damage to the outside of the boxes, or the Styrofoam inserts. Once I straightened the end piece I installed the back to discover it had been dropped and crushed during packaging or production. All told, between unpacking, failing to assemble, realizing I needed to return the product, talking to Seville Classics (that was it's own nightmare, 0 stars for their customer service) and making an attempt to stuff the genie bake in the boxes, this project wasted over 6 man hours. Additional hours were wasted arranging a return pick up of a 400 pound paper weight sitting in the middle of my drive way. Personally, I'm terrified of driving the 200 miles to Sam's to buy it in-store. Simply inspecting the box for damage is no insurance the parts were not destroyed at the factory. I spent time fixing bent parts on the work bench also, but was able to make it work. Unless you posses a broad array of of tools, and want to give away hours of your time, to only be disappointed I would think twice before buying this product.

I was disappointed when the top of the cabinet did not fit properly. I tried everything I could to get it to line up properly but it turns out the top was about 3/4” too short on the width and I had to re-drill the frame in order to get the bolt in. There is now a 3/4” gap between the butcher block top and the frame edge that I faced to the back of the cabinet to hide.

This is a nice tool chest/work station, but assembly was a nightmare. Awkward and difficult to reach location for screws, hard to align screw holes for bolts, hidden pieces tucked away in hidden compartments of the packing material. Although it's a study piece of furniture when complete, assembly is difficult in my opinion.

It was a breeze to put together. Time consuming yes, but not at all difficult.The instructions are very clear. My husband and I spent about 3 hours putting it together and much of that was just reading instructions. It is my kitchen workbench. No more pulling appliances in and out of cabinets. Love it!

I really like this workbench. It holds all of my excess tools and provide a lot of storage area. It features metal 'pegboard' sides and has ball bearing drawer slides. Although I will not use the mobility of the unit, it does have nice wheels. Assembly will take a few hours and everything is very well packaged in two large heavy boxes. Keep the cardboard box to assemble this unit on and not scratch it. The workbench wood surface is so nice I don't want to scratch it but it will look used as time progresses. The top is thick heavy hardwood and will last a long time. Everything is good on this unit but you will have a lot of styrofoam pieces to get rid of. How did they manage to get all this stuff in those two boxes?

I got this yesterday at sams club that is closing down , today I put it together I took my time and it was the easiest thing I put together. My wife was proud of me not swearing because I took six hours doing it. This was a well built bench and glad I finally decided to get it, Just remember it takes three to four hours to put together.

For 10 years I have wanted to remodel my garage into the ultimate Man Cave Well I finally did it and the Seville UltraHD Line was the icing on the cake for my Man Cave. I have added 1 of the Rolling workbench cabinets to the project and words will not explain how impressed I am with this product. It was easy to assemble and they look great. The height is great for working on man cave projects. I have been so impressed with the Seville products that I have added 6 other Seville UltraHD products to my Man Cave. Even my wife loves the look and my neighbors and friends wish it was theirs. The directions were easy to follow, assembly was easy and took some time, The rolling workbench took me about 2 hours to assemble but worth every minute., the parts were easily identified, all parts were all there and the outcome was awesome. Highly recommended the entire line of Seville UltraHD, well at least the six pieces I have in my new Man Cave.

This is absolute JUNK! I am normally very satisfied with everything I purchase from Sam's or Costco and that is why I am so loyal to them but I am embarrassed for Sam's for carrying this tool bench. The wood top is very nice and the castors are very heavy duty but everything in between is sooooo cheap! I would have been better off purchasing the 2-pack of foil and crafting my own bench! The metal is so thin that basically every panel and drawer front was dented out of the box and the large drawer is too small by 3/4" all the way around. This I can't understand because it's the only drawer that size so how could it be that far off??!! I would return this in a second if it wasn't at my cabin 2 hours away but the top makes it very heavy and too much to mess around with so I will wait until it just falls apart (which won't be long) and bring it to the dump. Don't purchase any of this Seville junk! You will be terribly dissatisfied!!

Great price but slightly disappointed. The shelving is punched to bend and form shelf sides. These areas have paint flaking off instantly. It had minimal damage right out of the box. When you pay hundreds of dollars you shouldn’t have damage even minimal.

The assembly took 5 hours and extreme frustration. The screws in the walls that hold the drawer gliders took the longest. They are little screws and you can't see most of the holes those 22 screws go into. Even where you can see the holes you can't get your hands in there to hold the screws, and the screws wouldn't stay on the provided screw driver, what saved my Bacon was my own screwdriver that would hold the screws straight until I got it started. But even then the screw would fall off and I had to try again about half a dozen or more times for each screw. Certainly the designer is worthy of capital punishment for such a cruel design. There's no way to hold the screws to get it started and one has to put there hand over the slider and stretch there fingers to turn the screwdriver. Once the frame is together, the drawers and other items are easy, just monotonous. There's a total of 265 screws, but the 22 that went into the sliders took longer, and were more frustrating than the other 243 screws. My suggestion is to find a Phillips head screwdriver that will hold the little screws straight for you to get them started and tightened. My problem was each time I tried and missed the hole I could not see, the screw fell off and I had to start again. And those little screws are the reason I only gave it four stars. They look very cheap, weak, small screws for the job. My grade 5 screws look of higher quality than these, and I know grade 8 is for tractors and stressful applications, but I want this to last. It looks great, but if the screws holding it together are weak, then how long will it last before it breaks apart??? So 0 stars for assembly, and 4 stars because assembled it looks great, the drawers slide and fit well. The lock may not even be good enough to keep honest people honest🤷🏻‍♂️ It's another weak part of the system. The work top is top notch solid wood. But if you have lots of patience, and can have 22 screws that are almost impossible to even get started fall off and restart several times and not blow your top, then I think it will be a pretty good tool cabinet, work table for you. It's about 250 lbs and took three of us to load it. But I sent my helpers home during the effort to try to attach the sliders to the back wall and front frame, because they couldn't get their hands in there or see anything and were so frustrated they weren't helping. Helpers aren't needed except for unloading and turning it over, and they weren't there for that, so I used all of the packing materials and some other foam I had and put it on the drawer side in kind of a mountain on each end and in the middle. I locked the wheels. Then I laid it over on the packing material hill I just built. Once laid over on it, I could get my hands under the side to tip it now on the side of it's wheels resting on the packing materials, then lifting with my legs I was able to lift the top setting it on all four wheels. Then I started assembly of the drawers, etc .