Love it so much I ended up going back and bought another one. Built like a tank. Great storage space for all my tools .Makes working on a project so enjoyable. Nothing like working on the Caddy. Seville!! The only trouble I had was flipping it over with the wheels on. I had to take wheels off to get it upright. Could be my age showing am close to 70.

I have assembled 7 various Seville Classics UltraHD cabinets for myself and my son. They have all, except this last, fit together like a dream. The holes in the largest draw of this workbench were obviously misaligned requiring pulling the sides together with a clamp to get the screws started. When the draw was installed it did not sit square and required mounting one side at the limit of slotted holes to get it closed with rubbing against the bottom of the front frame. I also discovered hidden damage of the front frame only after attempting to install the bottom panel. Because of its size, state of completion, and foreseen time wasted in requesting a replacement; I decided to repair the damage. The draws are in various states of misalignment in the finished cabinet, but not to degree of malfunction. It is after all just a work bench, not a piece of fine furniture.

I love my new workbench from Sam's. The only issue was it cost $143.00 to have it delivered so I went to pick it up. It's quite heavy, 500 lbs heavy. Just fit into my vehicle. I paid someone to put it together, needless to say that person won't work for me anymore. It took 4 hours to put together. I don't know why Sam's can't sell the. Assembled. Other than that it's a great bench. Tons of storage.

Not sure whos idea it was to include industrial cheese graters on the sides but you would make a killing at Kitchenaid. I hit my fingers on the sides trying to put the screws in more times than I would like to count. Death by a thousand cuts has nothing on what the sides of this will do to you.

Box was delivered with broken, open corners. Couldn't detect problems until we emptied boxes and sorted parts (took about an hour, 250 pounds) Assembled immediately, but took two of us hours to do. EIGHT PROBLEMS with construction, design, assembly. (1) back frame right corner was badly dented and bent; paint cracked and peeling as result. (2) right side panel dented and bent; won't accept screws to attach to back frame. (3) cross brace on left front panel badly bent and twisted, so drawer won't close. (4) bracket on large drawer that attaches drawer front to side is broken; drawer broken. (5) 4 pre-drilled holes with anchors were drilled a full inch too far inside from the corner of the front frame; they were correctly drilled on left side, but not on right; so right door can't be hung. How could the factory do this??? Unfathomable. (6) roller bearing on top right drawer bent so badly, drawer won't close. (7) roller bearings are pre-attached to frame badly; drawer "reveals" on front look very bad; not like in picture! (8) brake on one of the casters does not lock the wheel. We took pictures, but not wasting my time posting them here. Take my word for it--a shoddy piece of engineering and delivery! You might get lucky, but I doubt it. There are just too many things to go wrong. And if they can't even pre-drill the holes in the correct places, their quality control is abysmal.

We bought 2 of these Seville Classics UltraHD Rolling Workbench's from Sam's Club. The are well worth the money. We purchase them for the Tiles with Style showroom and homestead, here in TN. We have a small commercial kitchen where we process all of our foods for the year. These cabinets work perfect with any stainless steel decor. It was a flawless assembly process. They boxed the parts in order of the assembly, which made it super easy. It does take about 5-6 hours to assemble one cabinet, and you WILL need a second person to handle the top, and to flip over the cabinet, to screw on the wheels, and turn it over again. The castors are heavy duty; about 2" wide. They roll easily from one location to the other. They are in our living area that is connected to the kitchen, so we can easily roll one over into the kitchen for an extra work surface and easy tool access. The cabinets come with pre-cut shelf foam liner. Just slip them in place, and voila; you're ready to fill them up. We are very pleased and will probably order some other Seville Classic products. I would recommend purchasing them from a local store and not having them shipped. The boxes take 2 people to lift and they could get damaged along the way if shipped to your house.

I recieved this work bench and am very pleased with it so far. The drawers seem capable of handling some weight and don’t feel cheap. They open smoothly with no wobble. I look forward to years of use from it. It came without any damage and took me about 2.5 hours to put together by myself. I just had to follow the directions and used a drill on pretty low torque to help speed up the process. Overall I am pleased with the Seville brand and have purchased several of there items to match the bench.

Nice Size. It has a nice height. The included wheels and handles are a plus. The drawers are deep enough for tools and fully extend. The drawers are smooth and of good quality. If you have a chance, take a look at the display at the store to make sure it serves your intended purpose. I like it. If you have large hands, be careful and take your time with the side panels. Putting the screws in didn't provide much room for my hands against the ventilation holes on the side. (Not as bad as a cheese grater, but it did remind me of one.) The instructions at the end points out the use of one sized screw for the drawers but there are only enough screws if you use another screw with a larger head size. (maybe I missed something.) The only flaw was the back panel. there are three metal sheets welded to the back and the center panel had a minor undulation like the person doing the welding couldn't get it to fit. There was no damage to the packaging, so this one flaw, I suspect, was done back at the factory. When putting it together, most of the structure is put together upside down, then the whole unit is flipped over in order to finish putting it together. this is a nice size unit and it has some weight. I was able to flip it, but it would have been better if I asked someone for some help, for safety. Even though I think I'm strong, you don't want this to slip on the cardboard or plastic on the floor. Also make sure the wheels are locked before flipping. You don't want anything getting away from you. Take your time and play safe.

Pro: massive hardwood top ballbearing drawers large solid wheels lots of drawers pegboard ends Con: Took 3 hours to assemble solo Very thin metal, expect it to arrive with a few dings especially the back panel "shelf" has no center support so don't put much weight in the middle of it. Its not Craftsman quality, but its not Craftsman price Tips: Flip boxes over to open - they are split down the middle When assembling shelves, tighten all screws before attaching to slide - instructions imply to not tighten all screws until its fully installed but you can't reach the back screws when its installed. Have a rubber hammer to "adjust" handles into place without marring the matte finish.

I have yet to receive my workbench. The item is shipped by a seperate company. I have been provided a a link from the shipping company that does not work. I have called the shipping company (Maersk/Pilot Delivering) 4 times. Each time after being on hold my call is disconnected. Requests to schedule delivery from the company's website have also gone without response. Sam's club has been unhelpful at solving this problem. I am writing this review as a last attempt to get some help with this problem.