Installed this a month ago in our DIY renovated bathroom and love the look and feel of it. At first we were concerned about the plastic walls but they installed easily and feel secure once everything is tied together. Installation is definitely a two person and the DIY instructions were awkward at time requiring us to seek assistance via YouTube but in the end we were able to get it installed, watertight and working well. The clear glass is harder to keep clean but it allows the sun to shine in each morning during my shower and helps me to start the day with a positive outlook.

The instructions are to be used a guide. I researched this shower and spoke to the support gentlemen Robert who was very knowledgeable and helpful. the shower is very good quality however is difficult to out together. You need to make sure the base is level and square otherwise everything else will be out. You will need to build up behind the walls a frame on the drywall or cement board to provide support. Also you will need to caulk and silicone are cranks and gaps. - good tub adhesive will be you best friend.

I completed a DIY installation of this shower kit in a very small bathroom at my 100+ year old cabin in Estes Park, CO. I installed the shower as a replacement for a clawfoot tub that took up too much space. I ended up using the shower base and glass enclosure but not the acrylic wall panels since the walls were too out of plumb. The instructions that came with the kit were generally clear and complete though a few details were omitted (e.g., need to drill pilot holes for installation of the frame to the wall tracks). The quality of the shower base and enclosure were very good. However, the phillips-head screws that came with the kit were soft and easily stripped so I bought hex-head screws that I used instead. I have not used the shower yet but I am very happy with the quality and appearance of the new shower.

Wife and myself are completely thrilled with our new shower. Installation was straightforward. Although I would recommend that unless you are an experienced tradesman or similar this is best left to a professional. That being said I managed to go solo but extra hands are definitely recommended. We never realized how small our shower was till we began to use the Ove 36" Breeze. Enough room for a shower chair which we will soon have need of. All in all Darn happy with shower.

The instructions are terrible and we could only find animated video tutorials. Instructions were wrong! Install took a long time but it does look good and utilizes the space efficiently. Seems like providing clear instructions should not be that difficult - would be 5 stars if that was the case

I bought this for a small cabin bathroom a couple of months ago. It looks beautiful, which I would never have thought I would say that about a shower! The door glides easily and the support is strong. I chose the frosted glass and love the look. Everyone that sees it comments on what a great shower it is. It did not disappoint, perfect for our needs!

I purchased this Jan 2021 for a pretty small bathroom. I found the shower base to be super sturdy with no flexing. It only took one 60 pound bag of mortar to set the form onto the floor. You will want mortar or cement, but not concrete. The aggregate in the concrete will interfere with setting the base. The shower walls were without blemish and while they feel flimsy, they are actually quite durable. The instructions for assembly were just ok, though the YouTube video was good as a backup. Just keep in mind there are a lot of different YouTube videos, so you will need to pick the one that is specifically for your model. One thing that did cause a bit of an issue for me was there wasn't any data on how far away from the shower form wall from the sheetrock. There is a void behind the shower wall, so my rough-in for the valve was too far into the wall, which was frustrating. If you are roughing in a valve, you will want to allow 1-1/2 inches from the surface of the shower form wall to the sheetrock behind the shower form wall. I also kept the film on the form during the installation, only peeling back what was necessary to caulk or to mount the hardware. Once the whole shower was assembled did I peel the rest of the protective film, and there were no scratches in the finish. Once assembled, it is a very solid feeling shower. The door operates smoothly, and having the magnetic strip to keep the water in is a real bonus. The photos are the work in progress.

We are enjoying the nice shower and the rounded curves of the model. It did prove a bit challenging for my guy installing it because there’s a 1 inch lip that doesn’t allow the shower walls to sit flush against the actual walls. Therefore, he had to cut into the walls to push the shower walls as close and flush to the main walls as possible but the shelves are still flimsy and I don’t put a lot on them. Also found that you can’t properly caulk inside if you have both doors already installed. We did need to put shims underneath the doors where they connected to the shower pan because when the doors were open and close, it kept moving and pulling the caulking off the shower pan.

Very happy with this shower so far. Bought it because of limited bathroom space for me; circular door takes less space than a front-opening door. Back ordered and had to wait until Ove production caught up. 15% price difference between two big-box stores. Seems to be several versions of installation manual; contractor used what came with delivered product. Didn't seem to be any problems with installation. Had to add behind-wall support for safety grab bars; good thing contractor knew I wanted those installed before putting shower enclosure up. Happy with purchase..

We bought this, as the description said the walls could be installed on unfinished walls with the studs. All the directions state to sheetrock the walls. Would have liked the walls to overlap, rather than screw and butt them together with silicone.