While there were a LOT of screws to put this together, the instructions were very clear, and pieces marked well. Check all the parts carefully though and check the boxes as some pieces are "hidden" inside of others or in the packing material. When putting together make sure to only partially tighten and get all screws for the piece you are working on in first or it WILL make getting all the screws in harder later (I learned that the hard way) and then tighten completely. Even with that I had one corner that I just could not get ligned up right. This bench is VERY heavy, most of that weight is in the wood top. While one person could do a lot of this themselves, two people definitely makes it easier, and is needed especially when almost done and "flipping" upright. Personally I ordered an extra set of swivel wheels to make moving around easier.

I have assembled 7 various Seville Classics UltraHD cabinets for myself and my son. They have all, except this last, fit together like a dream. The holes in the largest draw of this workbench were obviously misaligned requiring pulling the sides together with a clamp to get the screws started. When the draw was installed it did not sit square and required mounting one side at the limit of slotted holes to get it closed with rubbing against the bottom of the front frame. I also discovered hidden damage of the front frame only after attempting to install the bottom panel. Because of its size, state of completion, and foreseen time wasted in requesting a replacement; I decided to repair the damage. The draws are in various states of misalignment in the finished cabinet, but not to degree of malfunction. It is after all just a work bench, not a piece of fine furniture.

Very well made and easy directions. Would be a 5 except 3 of the bolts anchoring the wooden table top to the base were 1/4" off. I used 3 5/8 self taping lug bolts to compensate. The work bench is perfectly square and of good quality other than this. Yes it's not my first rodeo and I never tighten the bolts before full assembly of that section.

I rarely write reviews, but I thought this piece warranted it. There are a lot of parts to assemble, and I'm used to confusing directions and misaligned holes, but this arrived cleverly packaged, the labeling and directions were perfectly clear, and the pieces were all flawlessly aligned. The resulting workbench is great, and an unbelievable value at the price. I would highly recommend it.

I am putting together a woodshop in a 12x24 shed... and space is at premium (i.e., got to get a LOT into a small space). I checked out the tool cabinets at big box home improvement stores and their workbenches cost a LOT more than this Seville Workbench. Don't get me wrong, their tool cabinets are much more sturdy... but if you don't need that level of ooomph, the Seville is a great option. The assembly process went very smoothly, but it definitely needs 2 people for some of the steps. The finished workbench drawers work very well, but you do need to get used to the resistance at the beginning of pulling out the drawer, and at the end of pushing the drawer back in. The slip-resistant liner for the drawers works perfectly. All my tools, tape measures, tool batteries, etc. stay where they’re put. The wheels for the cabinet are beefy! There are no problems at all with handling/moving a large, heavy work bench around. I showed a friend this work bench, and she had to have one too! No good dead goes unpunished… She purchased one, too, and I had to help her assemble it!

Second one I've bought and unlike the first one, this one had a laminated top! Have emailed company ( Daisy hasn't a clue!) she doesn't understand what I'm talking about! SMH! The 2 pictures are of the new and old one I've bought Like these, but not the new top!

The packaging is amazing. It will take you 20 minutes to get everything unpacked, but worth it to have everything undamaged. Easy assembly, despite others comments to the contrary. It takes some time, about 2 full hours from start to finish. Beautiful and sturdy. Should last for decades.

Nice unit, good quality construction for price, solid top surface. Heavy! Assembly took just shy of two hours by myself. i think i read a total of 30 words in the directions, most of it was just looking at the pictures, verifying the correct screw or bolt, and the correct panel number. otherwise it is fairly straight forward and a lot of common sense. only real words of advice are have a powered screw driver, but start the screws or bolts with the included driver or wrench, and loosely fit all panels in a particular step before tightening the screws or bolts. this will save you a lot of time once you realize that torquing down one screw prevents another panel from lining up correctly. the only thing i struggled with was flipping the unit right side up once the casters were installed. it can be done, but it would have been a lot easier with a second person. would buy again and actually probably will be buying a second one.

Box was delivered with broken, open corners. Couldn't detect problems until we emptied boxes and sorted parts (took about an hour, 250 pounds) Assembled immediately, but took two of us hours to do. EIGHT PROBLEMS with construction, design, assembly. (1) back frame right corner was badly dented and bent; paint cracked and peeling as result. (2) right side panel dented and bent; won't accept screws to attach to back frame. (3) cross brace on left front panel badly bent and twisted, so drawer won't close. (4) bracket on large drawer that attaches drawer front to side is broken; drawer broken. (5) 4 pre-drilled holes with anchors were drilled a full inch too far inside from the corner of the front frame; they were correctly drilled on left side, but not on right; so right door can't be hung. How could the factory do this??? Unfathomable. (6) roller bearing on top right drawer bent so badly, drawer won't close. (7) roller bearings are pre-attached to frame badly; drawer "reveals" on front look very bad; not like in picture! (8) brake on one of the casters does not lock the wheel. We took pictures, but not wasting my time posting them here. Take my word for it--a shoddy piece of engineering and delivery! You might get lucky, but I doubt it. There are just too many things to go wrong. And if they can't even pre-drill the holes in the correct places, their quality control is abysmal.

Sam's price for this workbench was by far the best I found. My husband and I bought two and put them both together. You definitely need to have at least one person read and make sure the directions are followed. Going rouge will not get the job done. There are also some places where small hands come in very handy. Since we bought two, I would say the first one definitely took more time, but the 2nd one took us less than 2 hours. They are well made and i think we are really going to enjoy them, then amount of drawers is great. We would both recommend them to others