Bought this last month. It allowed me to finally get my work area organized. Added the top cabinets and peg board to complete the change. Most reviews complain about time to assemble, for the 2-3 hundred dollars I save from buying other brands. I'm okay with a bit of assembly. Follow the instructions and it goes pretty smooth. Only issue which the instructions don't address is there are a few screws that are in difficult places to get to. I however removed a couple of pre assembled drawer slides and was able to get to those position with a bit more ease. I mounted a 180 degree vise with out it being any problem with the drawer operation. It looks nice and for just a weekend tinkerer it should last me for years. One other tip would be to get a smaller piece of wood for your main work area. The wood top is shiny but can easily be surface scratched. A 2'x3'x1/2" piece of wood gives me a work area for just working without scratching the top.

I have put together grills, Ikea furniture, toys and many other things but this work bench was well organized and very straight forward to put together. The directions were clear, the parts were marked properly and it only needs a Philips head screw driver and wrench which they supplied. You can also use a power drill with an extended Philips bit but make sure to put it on low speed to avoid stripping screws. You will also want to use the provided screwdriver in the spots that are close to seams making it difficult to get your drill vertical. My only complaint was the delivery company leaned it against my front steps and put 2 good size dents in the back panel (at a seam of course) which I had to use a soft mallet to pound out. This unit is quality and they even include pads for the drawers so your tools aren't banging around on the metal. This piece is quality and very affordable compared to many others I viewed online.

This is a super-capacity workbench. I am using this in an academic office as a credenza. My only complaint - one piece on the bottom frame is bent which results in a problem with closing the bottom drawer. There was no evidence of damage to the box, so I'm suspicious that it was deformed before it was boxed. I was transitioning between offices and did not want to wait on a replacement piece, so it was not reported to Sam's or the manufacturer.

Great Garage wood work bench and cabinet for holding all your tools I first saw in my brothers garage, He also recommended. I picked the cabinet with more smaller drawers than his. Well engineered. Follow the directions and you will have not problem assembling which takes over 4 hours. It is big, bulky and heavy so I had mine delivered no charge.

I have assembled 7 various Seville Classics UltraHD cabinets for myself and my son. They have all, except this last, fit together like a dream. The holes in the largest draw of this workbench were obviously misaligned requiring pulling the sides together with a clamp to get the screws started. When the draw was installed it did not sit square and required mounting one side at the limit of slotted holes to get it closed with rubbing against the bottom of the front frame. I also discovered hidden damage of the front frame only after attempting to install the bottom panel. Because of its size, state of completion, and foreseen time wasted in requesting a replacement; I decided to repair the damage. The draws are in various states of misalignment in the finished cabinet, but not to degree of malfunction. It is after all just a work bench, not a piece of fine furniture.

It’s a very nice work bench, the aluminum bends very easily if your not careful. It comes in two heavy boxes, it gets dropped off with a pallet jack. It took me 5 hours to assemble, one of the side pieces was slightly bent prior to receiving it, I used clamps to straighten them, since it’s so heavy to return.

Quality product with very clear instructions. Very nice how everything fit together without wrestling with it. I bought a a few of the Seville products at once and will be writing this same review for all of them. Yes, there are a bunch of pieces, but ease of assembly made it quite bearable. Quite Happy with my purchase!

This is a great tool chest. I was able to put it together by myself but it definitely would have been easier with a helper (especially to turn the piece onto its wheels). The directions are clear. There are a lot of parts to assemble and it takes time but a great piece for the price.

I bought this in red and it looks and functions great in my apartment kitchen as storage and expanded counter space.I relocated the fridge at the same time and it has opened up my kitchen SO much! Instructions were great and easily understood. Great packaging and quality. My sister and I put it together in a couple hours on my living room floor. It was a bit heavy to turn it up onto its wheels but, we managed to. I store kitchen stuffs; cutting mats, knives, instant pot, snacks, etc in it

I purchased this to use as a work bench/cabinet for an outdoor kitchen. It is excellent for storing the necessary tools and supplies for grilling and smoking (I know its a rolling tool chest/workbench, but it works well for a cabinet). It does take a while to assemble, but the instructions are well written and the parts are well engineered and go together easily. I would suggest that you have help assembling due to the size and weight of the workbench.