This rolling workbench is a tremendous value. It is solidly built and also packed with ample protection to prevent damage during shipping. Assembly instructions were very clear and all parts were well labeled. It definitely took a few hours to assemble but it is well-designed and I am confident it will last a lifetime. I appreciated the extras that were included such as full rubber bumpers and drawer liners.

The assembly took 5 hours and extreme frustration. The screws in the walls that hold the drawer gliders took the longest. They are little screws and you can't see most of the holes those 22 screws go into. Even where you can see the holes you can't get your hands in there to hold the screws, and the screws wouldn't stay on the provided screw driver, what saved my Bacon was my own screwdriver that would hold the screws straight until I got it started. But even then the screw would fall off and I had to try again about half a dozen or more times for each screw. Certainly the designer is worthy of capital punishment for such a cruel design. There's no way to hold the screws to get it started and one has to put there hand over the slider and stretch there fingers to turn the screwdriver. Once the frame is together, the drawers and other items are easy, just monotonous. There's a total of 265 screws, but the 22 that went into the sliders took longer, and were more frustrating than the other 243 screws. My suggestion is to find a Phillips head screwdriver that will hold the little screws straight for you to get them started and tightened. My problem was each time I tried and missed the hole I could not see, the screw fell off and I had to start again. And those little screws are the reason I only gave it four stars. They look very cheap, weak, small screws for the job. My grade 5 screws look of higher quality than these, and I know grade 8 is for tractors and stressful applications, but I want this to last. It looks great, but if the screws holding it together are weak, then how long will it last before it breaks apart??? So 0 stars for assembly, and 4 stars because assembled it looks great, the drawers slide and fit well. The lock may not even be good enough to keep honest people honest🤷🏻‍♂️ It's another weak part of the system. The work top is top notch solid wood. But if you have lots of patience, and can have 22 screws that are almost impossible to even get started fall off and restart several times and not blow your top, then I think it will be a pretty good tool cabinet, work table for you. It's about 250 lbs and took three of us to load it. But I sent my helpers home during the effort to try to attach the sliders to the back wall and front frame, because they couldn't get their hands in there or see anything and were so frustrated they weren't helping. Helpers aren't needed except for unloading and turning it over, and they weren't there for that, so I used all of the packing materials and some other foam I had and put it on the drawer side in kind of a mountain on each end and in the middle. I locked the wheels. Then I laid it over on the packing material hill I just built. Once laid over on it, I could get my hands under the side to tip it now on the side of it's wheels resting on the packing materials, then lifting with my legs I was able to lift the top setting it on all four wheels. Then I started assembly of the drawers, etc .

Great product, some helpful assembly hints: - this is all metal to metal screw assembly. Highly recommend a threadlock product such as Loctite Threadlocker. Will help eliminate loosening. Don't aggressively over-tighten screws. - comes with a magnetic screwdriver - a must! Highly recommend a powered hand held driver with a magnetic adaptor. Don't use a high powered driver like DeWalt; too powerful and no room. - I had to take off some of the drawer slides to properly secure the unit. They will come off and back on with ease. - Assembly is easy but time consuming. You'll need another person for some of the steps.

Very good deal, lots of parts but easy to assemble. Delivery was good, no damage. Thick wood top, nice looking outside, again instructions and assembly was perfect. Great deal, I would use this as a kitchen island if I was going for that look, almost too nice fir my garage.

This is a nice tool chest/work station, but assembly was a nightmare. Awkward and difficult to reach location for screws, hard to align screw holes for bolts, hidden pieces tucked away in hidden compartments of the packing material. Although it's a study piece of furniture when complete, assembly is difficult in my opinion.

My husband and I have bought garage systems from Lowes and Home Depot and usually are made from particle board and they do not hold up. We saw the bench and cabinets at Sam's and decided to purchase. Wow, we could not be happier. They are metal framed, have a gazillion screws, very easy instructions to follow, sturdy as heck and big caster wheels that lock. This particular piece took my husband on his own about 5 hours to complete. You will be thrilled with this purchase as we are and make sure to get all the matching pieces. They may not be here for long and you will regret it if you only purchase the one!

From the moment it was delivered to competed assembly took me exactly 3 hours, by myself - except for the point when I needed help to flip it over (assembly of the carcass is done with the solid wood top on cardboard on the floor). The instructions are not great, but adequate and the correct hardware was all present, with even a bag of a one or two extra for each screw size. One screw did sheer off while installing, which maybe wouldn't have happened if I wasn't using my cordless drill instead of the manual screwdriver included, but there are just too many screws to do it all by hand. There are adjustments to ensure all the drawers and doors line up well, and overall the build quality is decent. This is not a Snap-On tool box by any stretch of the imagination, but then again it cost less than 10% what an equivalent sized Snap-On would cost, so I can accept that it is much less solid and sturdy. A couple pieces were slightly bent out of the box, but not so bad that it could not be assembled, so I'm not too concerned. Overall I expect this will serve my purposes and last a long time.

Nice looking bench providing you have help and lots of time. Directions were poor and found several mistakes.Several bent/misaligned parts plagued the build. Need small hands to build bench, especially in first several steps. assembly of drawer were time consuming and tricky. Several parts in this step were bent and directions were poor. Drawers work ok, but don’t slide easily. Would recommend because of low price and functionality. Have someone mechanically inclined help.

Very sturdy construction; heavy drawer pulls; oversized casters; solid top. For the money, there’s no better option. You can get better, sure, but you’ll pay twice as much, and this one is just as good for the average homeowner. It does take a few hours to assemble, but instructions are thoughtful, and straightforward. Definitely recommend!

I bought one of these and 2 of the large cabinet units. This one was a real chore to put together but it is well designed and strong. This is not Industrial grade of course but better than most residential/light commercial storage units. These are from Taiwan, not China. Will buy more Seville from Sams!