I just got done putting this together (with much help from #2 son) and there's a lot of putting together! It took us a good 4 hours I would say. But, it wasn't difficult. There are just a LOT of screws to put in and most need to be done with a hand held screw driver (provided, nicely magnetized too) The casters are massive and overdone to my mind. It seems to me that is one place they could have cut cost some w/out hurting the quality. Concerning cost, I shopped all over the web and the $199.99 (+ tax) I paid is the absolute lowest price I found for this piece. I still think $200 is too much money for an item like this but then, I'm 60 years old and lived too long when things did not cost so much I guess. I shopped long and hard for what I want for my particular storage wants and believe me, for what they are charging for things out there, this is an EXCELLENT value (whether I personally like it or not.). I have seen things for $400, $500, $600 and more that did not offer what this does. What I like about it; I build models and do leather work, knife scabbards, sheaths and the like. Too many drawer cabinets have a few, deep drawers. Those I wind up piling things atop others or the space above a layer of stuff just goes unused. This has a deep drawer for bulky items but, there are 5 nice shallow drawers. They are wide and deep (front to back) and the drawer pulls far enough out so that things are not hiding in back or buried where they are hard to get at. Last but not least, there is a nice hardwood top working surface. The cabinet is plenty stout but, like another reviewer commented, the drawer glides are a little on the week side. Heavy loads might cause them to drag a bit. I would not recommend this for a full load of mechanics tools. But, any thing up through say, medium-heavy duty would be just fine. If there is a drawback, it would be the purely utilitarian appearance of this but, it was clearly designed as such. I am keeping it in our front room where I do most of my craft work. I am considering attaching a couple pieces of paneling on the sides. That would be easy and make it look a little more... homey. In any case, My area should soon be a lot neater.

Nice cabinet. For my needs, it's large and the top 5 drawers are pretty shallow. Quality is great, but I'm now trying to sell it. I bought 2 and definitely don't need both. I would love to sell both and get something similar but smaller, with deeper drawers.

The box arrived undamaged and in good time. One of the drawer bottom panels was bent slightly but with some persuasion it still fit in place. The assembly process was smooth. Many pieces and parts but I didn't require help to assemble. The drawers don't glide as easily as I'd expected but far from a deal breaker. In the end I have a nice addition to the garage that doubles as a work top for my 12” compound miter saw, and enough drawer space to hold most of my hand tools. As a bonus, the five short drawers enable me to finally (at least for the moment) have my tools organized. The tool cabinet is certainly sturdy and well designed and, frankly, the only 24” deep cabinet I could find without at least doubling the cost.

I have several of these units and was pleasantly surprised that after I assembled it that it was about 6 inches or so deeper than the ones I have. They are sturdy and well designed. The only problem I had was that a couple or so of the screws would not go all the way in. It was not the screw it was the nut embedded in the material that must have been stripped partially in. . Luckily I had a few shorter screws and they worked ok. Other than that it went together great. I have other Seville products and I highly recommend them.

The tool workbench was just what I needed. It is well made and sturdy. The only downside was it had to be put together, all the drawers and whole cabinet. The one drawer handle was not stamped properly in the factory, but it still works. Wasn't bad enough to return. It fits in my small garage perfectly.

This is a LOVELY cabinet, I love the drawer storage. My one "dislike" of it is that it is so tall. I may try to find smaller wheels to bring the height down a little. I was hoping to fit this under an adjustable height workbench, but will have to keep the workbench much higher than I want just so that it will fit under neath. Totally my fault for not understanding height, but the photos don't help when gaging this information. I did use a tape measure, but seeing it next to another item (workbench or table) would have been helpful. One of the downfalls of ordering online. It's wide and tall. But I still like it.

Very well put together workstation. It is solid. The only thing that needs work are the drawer slides. They are a bit sticky and require a bit more effort to fully close than I would like. The other issue is aligning the drawer faces and assembly. The instructions need to be updated here and I sent the company updated suggestions to improve that process, but getting the drawers aligned and staying that way (the slides take a bit of force and when opening and closing can bend them a bit) is challenging.

Very well built with solid material. There are over 200 screws to attach. It took me four hours to assemble. Some screws are hard to reach. Literally the instructions tell you to remove two drawer slides. This is simply poor design. You have to remove already attached screws for the bumpers and handle. Again, better installation instructions needed. I has one dent one the bottom panel. The wheels are truly heavy duty. This is about twice the size of 12” deep tool chests.

Well designed and manufactured. All the pieces fit together. Assembly is involved but instructions are straightforward. Outside packaging wasn't clearly marked (or I missed it) so I ended up opening the box from the wrong side which was awkward to remove the contents.

Solid, well constructed, high quality materials, and modern look make this a winner. It was time consuming to put together but each piece was manufactured perfectly to ensure smooth operation. Perfect size to complement my workbench and hold my mitre saw. Well done!!