We bought the kit with walls. It looks well built and has a clean modern appearance. One quibble I have with the instructions both printed and the link to the video installation instructions does not show that the walls need to be reinforced. They do not lay flat against whatever you put behind it (cement board). Fortunately there are other videos on YouTube that show this. I suggest Ove add this to their printed instructions.

Very happy with this shower so far. Bought it because of limited bathroom space for me; circular door takes less space than a front-opening door. Back ordered and had to wait until Ove production caught up. 15% price difference between two big-box stores. Seems to be several versions of installation manual; contractor used what came with delivered product. Didn't seem to be any problems with installation. Had to add behind-wall support for safety grab bars; good thing contractor knew I wanted those installed before putting shower enclosure up. Happy with purchase..

We bought this, as the description said the walls could be installed on unfinished walls with the studs. All the directions state to sheetrock the walls. Would have liked the walls to overlap, rather than screw and butt them together with silicone.

This corner shower fit into our small bathroom and looks wonderful. We just finished installation and caulking, so we can't tell you yet how well it performs during use. The instructions can be a bit challenging; it helps to look ahead to see how it all makes sense, and the video helps too. Every installation is a bit different so it's difficult to have all the variables listed.

I purchased this Jan 2021 for a pretty small bathroom. I found the shower base to be super sturdy with no flexing. It only took one 60 pound bag of mortar to set the form onto the floor. You will want mortar or cement, but not concrete. The aggregate in the concrete will interfere with setting the base. The shower walls were without blemish and while they feel flimsy, they are actually quite durable. The instructions for assembly were just ok, though the YouTube video was good as a backup. Just keep in mind there are a lot of different YouTube videos, so you will need to pick the one that is specifically for your model. One thing that did cause a bit of an issue for me was there wasn't any data on how far away from the shower form wall from the sheetrock. There is a void behind the shower wall, so my rough-in for the valve was too far into the wall, which was frustrating. If you are roughing in a valve, you will want to allow 1-1/2 inches from the surface of the shower form wall to the sheetrock behind the shower form wall. I also kept the film on the form during the installation, only peeling back what was necessary to caulk or to mount the hardware. Once the whole shower was assembled did I peel the rest of the protective film, and there were no scratches in the finish. Once assembled, it is a very solid feeling shower. The door operates smoothly, and having the magnetic strip to keep the water in is a real bonus. The photos are the work in progress.

The shower is great...it fits in my very small space (my laundry room/extra bathroom). The only thing that I would mention is that there seems to be a lot of space between the walls and the base especially in the corner. My contractor needed to put in extra thick silicone caulking for that. I've decided to add some vinyl strips and more silicone to make sure that I don't have to re-caulk as often. That's a lot of caulk! Otherwise, the walls and base are perfect!

This unit replaced a unit that was approximately the same size. The interior space is much greater, wonderful surprise. My only complaint is that the walls need backing, or reinforcing. They have some hollow areas behind them that if left not reinforced will move if pressure is applied. Otherwise, it is a perfect unit for a corner shower.

We just had this shower installed It is beautiful. The doors slide easily. The floor is solid. It fits in a smaller bathroom which we have fitted into a corner on the back porch mud room. Our installer felt that this was an easier install than similar kits.

We are enjoying the nice shower and the rounded curves of the model. It did prove a bit challenging for my guy installing it because there’s a 1 inch lip that doesn’t allow the shower walls to sit flush against the actual walls. Therefore, he had to cut into the walls to push the shower walls as close and flush to the main walls as possible but the shelves are still flimsy and I don’t put a lot on them. Also found that you can’t properly caulk inside if you have both doors already installed. We did need to put shims underneath the doors where they connected to the shower pan because when the doors were open and close, it kept moving and pulling the caulking off the shower pan.

Just received it. Everything looks good. Can't wait to install and enjoy.