[This review was collected as part of a promotion.] We bought this over the summer and after a couple of days of work to install (rain delay) the end result is beautiful. It’s solidly built and stands up to high wind. The 12 v outlet allowed us to install a nice light fixture in the middle. I’m considering getting another in a smaller size for our pool area.

[This review was collected as part of a promotion.] We bought and assembled this Gazebo in the middle of summer. I did the vast majority of the assembly by myself. I just need help lifting the four roof sections to the top of gazebo. My Dad and My son also helped me remove all the blue plastic that was protecting all the roof sheet metal parts. That would have taken me an extra day if I had to do that on my own. It is very sturdy. We also added an indoor-outdoor fan to the top of the gazebo. We also added lights and mounted a TV with an outdoor cover. The only think I can say negative about this gazebo, is that it really needs gutters. If we have rain and it is windy too, everything under the gazebo still gets soaked.

My Cordova Gazebo is such an added space. My family loves the leisure pleasure of the Cordova. It has added so much joy and beauty to out backyard. Guest want to get one for their entertainment pleasure. I would definitely purchase again. Very sturdy and looks beautiful.

We purchased to include build. It all went smoothly and, in the Hill Country heat, this shaded area is an oasis poolside! Makes it very comfortable to both use the smoker and eat outside now. We are still decorating--a work in progress. Beautifully constructed, with electrical outlet and ample roofline to insure water (we need rain) sheds to the exterior. Thanks for helping we retirees to get this beauty built!

Backyard Discovery 14’ x 10’ Cordova Gazebo Review This is a well-designed and organized kit for simple construction with minimal experience. It is packaged and labeled well. The instructions are clear except for a couple of places I’ll note below. Delivery: The order arrived in Houston about a week before the estimated delivery date but was not delivered to us until a week after the estimated delivery date. The packages were all in good condition. They are heavy to move around. Assistance & Assembly Time: I was able to do the assembly completely by myself except for two times I needed a few assistants for about ½ hour each time. [Step 7 (Attach 14-ft beams to posts with 10-ft beams attached), Step 12 (Installing roof support), and Step 30-35 (Attach roof panels).] It is a lot of bending over, moving parts, and using a drill to install connectors. I worked on it for about 5 days for about 4 hours each day. Tools: It would help if the Screw Setter H100764 was magnetic to hold screws while lining up with the holes. A hammer drill and 3/16” hammer drill bit are needed for installation on a concrete slab. I used firring strips as spacers between roof panels during construction so they could lay on top of each other during assembly. Positioning: Layout and mark final post positions. We put the gazebo next to our house with a 6” gap between the house gutter and the gazebo roof edge. This was barely enough to pass the roof section up between the gap and took some extra hands to support this during installation. It also made installing the Corner Ridge Cap in Step 40 difficult as this is intended to slide onto Ridge Cap Channel from the bottom. We used pliers to bend open the Corner Ridge Cap on one side to allow this to clip over the Ridge Cap Channel and then bend back in place as best as possible before sliding into position. Assembly Notes: Recommend doing Step 9-11 before Step 7-8 so assistants can help with Step 7 and Step 12 at the same time. I did all roof panel framing before attaching sheeting. (Step 14-18 twice, Step 22-26 twice, then Step 19-21 twice and Step 27-29 twice.) IMPORTANT NOTES: Step 20 & 28 Ridge Cap Channel Assembly – Ensure the bottom end of the channel is above the bottom roof joist to allow space for installation of the Edge Trim Corner Splice in Step 38. THIS IS NOT MENTOINED IN THE INSTRUCTIONS. Step 38 Edge Trim Corner Splice Assembly – Ensure Edge Trim Corner Splice is UNDER the Ridge Cap Channel. THIS IS NOT CLEAR IN THE INSTRUCTIONS. This is needed to allow installation of the Corner Ridge Cap in Step 40.

[This review was collected as part of a promotion.] This Gazebo was a replacement for 25+ year old gazebo. My wife and I with some assistance from the grandson were able to assemble this in one weekend. The instructions were very straightforward and components were mostly manageable from and assembly and with perspective. Yep we utilized the grandsons strength and height to get the roof assembled and in position. All within our expectations and abilities. It adds some beauty to an already beautiful view.

[This review was collected as part of a promotion.] It was a long process to install but all worth it. It looks so beautiful and luxurious. The wood color is stunning. Beauty does not compromise quality, it is very sturdy and well made. Our backyard looks so good with this gorgeous gazebo.

[This review was collected as part of a promotion.] We bought this last summer and built it over a week doing a few steps at a time. The most difficult step was installing the roof segments. It was definitely necessary to have at least 3 more sets of hands to help. We store a golf cart underneath but also use it for our pellet smoker.

The instructions were easy to follow along with the bilt app 3D views. Considering the amount of parts and pieces of material nothing was missing. In most cases there were extra nuts, bolts and screws. I was really impressed with the simplicity of the installation.

It took us a few days to put together and I am not handy at all. I was concerned about sturdiness but once it’s complete, it’s solid! I love the look of it. I would highly recommend this gazebo! All the parts were in the boxes, make sure you pre-drill the holes like it says in the instructions. Great product. Please make a mosquito net and sun screen for it Backyard!