Backyard Discovery Palisades Outdoor Cedar Bar with PowerPort

Well designed and constructed bar. FOLLOW the directions, particularly with the squaring, and you will be Golden! I suggest you use the wood blocks included in the packaging for assembly. Came in really handy when trying to get a section in place.

I finally got around to erecting the Palisade Bar after having it in the yard for a month. A lot of the time was consumed creating and curing a concrete pad. The Outdoor Bar is as as nice in front of me as it is in the photos. The directions were relatively easy to follow though I altered the order for step for physical convenience. . I erected the back posts. Brace and panels then tilted them into place.i screws a 2x4 to the house wall, added 2 arms that allowed me to clamp the back panel vertically. It was good opportunity to level the rear posts. Then I installed the side braces before constructing the front post and panel a tilting that into place. I loosely bolted all corners which enabled leveling. Then I constructed the 2 roof sections. Rather than adding the metal roofing, (my wife and I are 73) lifted and slid a roof section into place. With mallet and block of wood we were able to align the screw holes. Then I added the metal roofing Maybe your guys can construct the bar in 6 hours, I took me 2 days. I didn’t encounter any hiccups until installing front inside counter. With the front panel in place, the inside counter cannot be placed deep enough to allow 4 bolts. The 2 outside bracket holes on both sides hang outside the front. Only 2 bolts on each side can be used to secure the counter. I centered and drilled a 3rd hole between the 2 good ones to add a 3rd bolt. I used Cabot Australian Oil, Honey Teak for the sealant. I’ll a Did a second coat come September.