I ordered two of these on-line. They both showed up with a duplicate of one large panel, and missing another require panel. Both??? Yes, both. Called Seville and they shipped out both the replacement parts, but I was left with two giant piles of parts in my garage for two weeks waiting for those replacement parts. The parts did come though, and after that I was able to assemble both units fine. There were a few small dents, and a few of the screw mounts came lose as I was assembling it, but nothing I couldn't live with. Much of the metal is thin and dents or warps easily. With hindsight I would have spent a couple hundred more and gotten a heavier duty unit I think. The units look good and serve their purpose fine though.

The other cabinets I bought had full side pieces and full front pieces. They're are on wheels and easy to manage. This one, the pieces are not full length. It takes two pieces to make a side. The screws kept breaking (the heads) and I used a screw driver. Not easily moveable to get it into place. It does hold deeper items. The shelves help to make it feel sturdy

Ordered 7 units, they all arrived with some damage occurred during shipping. My main criticism is with delivery, this cabinets come in boxes weighing almost 100 lbs. or maybe more , packed with thin Styrofoam, and they were shipped through regular FEDEX carrier. Imagine a delivery guy handling 700 lbs. by himself . Some of the boxes were so damaged that you could see the twisted metal through the holes without even opening the boxes. After all SAM'S was diligent replacing the damaged units, Product quality seems to be OK, you are paying for what you get. Just be prepared to tighten almost 200 screws, definitely assembly will go quicker if you have an extra set of hands. Product looks nice once assembled and fits a lot.

I needed a deep cabinet and this 48" wide x 24" deep certainly serves that purpose. I purchased two of these. They are nice looking cabinets that are well-engineered from an assembly perspective. Assembly was not complicated but did take some time due to the number of screws that are used. The one negative complaint I have about this cabinet is that the doors are flimsy which is something you don't notice until you start using it after assembly. The doors buckle/twist when opening which causes them to stick and not open smoothly. I also purchased a 36" wide x 18" deep cabiniet and the doors on that unit do not do this. In my opinion, the doors on this large cabinet should have additional support either in the form of larger gauge sheet stock, or with additional support pieces.

I ordered this cabinet online (not available in my local store) and it arrived within 7-10 days in a massive 150lb. box. It shipped from CA to my home in WI so you can imagine what it must have gone thorough en route. Something this large and heavy is bound to be awkward and suffer the consequences, but I was pleasantly surprised at how well it was all packed. Make sure to give yourself a lot of room for assembly - I would suggest a carpeted floor but if you're like me this was destined for my garage so that is where I put it together. The shipping box (when flattened) makes a nice cushion if you're working on a concrete slab - just be ready for a FULL 42 gal. trash bag of styrofoam packing pieces and a whole lot of cardboard. Most of the metal parts are nested within other parts and I have to give Seville credit for the way they packed it, but inevitably you're going to get some dinged corners here and there in a box this size and weight. I probably had a half dozen or so damaged areas and elected not to request new ones as the replacements probably wouldn't be any better. In the end it just didn't bother me that much as it was (after all) for the garage - and the corners that did get dinged up ended up hidden by the corner protector pieces. Everything is epoxy coated except the doors (which are stainless steel) and the finish seems quite durable, except in the areas where it got dinged up - there the coating just flaked off. The key lock they include for the doors is pretty wimpy - don't expect it to keep anyone out other than small children. Assembly was pretty straight forward and took a couple hours by myself. They even include a wrench, screwdriver, and a spare bag of one each of the necessary screws. All of the parts are clearly labeled and the different screws are separated in numbered bags - makes it very easy to follow the somewhat archaic instructions. After assembling the side panels and doors, it helps to have two people to screw the assembled panels together - I did it by myself with some makeshift supports but it would have been easier with an extra set of hands. Hanging the doors would also be easier with two people. The unit comes with four leveling feet which look quite sturdy, but I didn't use them. There are threaded holes on the bottom as an option to mount four casters in place of the feet (caster sets for this unit are available on the Seville Classics web site, as well as additional shelves), but they were out of stock there so I just picked up my own 5" casters with a standard 4" x 4 1/2" base plate, 300 lb. rated each. Going this route you have to provide your own bolts for the casters (I assume they would come with the ones you get from Seville), but I had to buy 16 bolts and guess at the size as everything on the unit is Metric thread. I actually brought the bottom panel with me to the hardware store so I could make sure the bolts that I bought fit before I got all the way back home. The caster bolts that fit were M8 x 35mm, coarse thread, with a flat washer and locking washer for each. All in all it's a great cabinet - plenty of storage with a weight capacity of 600 lbs. (150 lbs. per shelf) and having it on wheels makes it easy to move if you need to get behind it for cleaning, etc. Also having it up off the ground should protect it a bit from corrosion.

I got one for my garage work bench. It's solid and I love how thick the wood is. My wife decided it looked good enough to get one for the kitchen, now we have a place for a fruit basket, air fryer, and rice cooker. Got another one for my kid to do art on. Later my work got a new building and I got 10, yes, TEN of them for the new facility. While these are not perfect, you will not find a better value with a solid wood top work bench. The 72" wide bench will give plenty of space. Later I made my desk out of one, and put marble look shelf liner on top, with a giant mouse pad for the keyboard as well. Added a keyboard drawer for writing. I am typing on it right now. Has plenty of space for 2 27" monitors with a hanging stand and a large CPU tower. For reference, I do not like the cheap cabinets from this brand, they're flimsy. I am very picky about things lasting a long time. I want to warn you that although the legs are sturdy, they have small welds holding them together. Under normal use they will not be a problem, just don't abuse them. They can hold a lot of weight, and can be moved around without a problem, but if you were to do something that could tweak the legs, I would be afraid it could weaken them and decrease the lifespan. As you can see, I am confident enough to get these for an industrial setting but nobody will be bumping them with vehicles. For another reference, the ones at the box stores with the brand names are built the same way and have thinner tops with 2x the price. I recommend these. (you could, of course, spend 20x the price for a heavy duty one that is literally made for heavy industry, but you will need a forklift to move it. I have done my research on workbenches.

We had pieces not align right with other pieces. Therefore we were not able to put all the screw in. The outer pieces had dents in them throughout as well. This is a cabinet that we are using in the boss' office, so everyone is going to see this. Unfortunately it is to heavy for me to load and I have no truck to haul it in, otherwise I would have taken it back. Also I have no desire to waste another whole day on putting one together.

I purchased this cabinet based on the description. I was very disappointed. The sides and the doors consist of top and bottom panels held together with small screws. The back is four panels. It is basically two boxes stacked one on top of the other. This leaves a junction in the middle of the cabinet that makes the entire assembly very unstable. I will look more closely next time.

They were delivered to the house. The box was extremely heavy. It was easy to understand and assemble but it took a hour and 1/2 for the 2 of us to assemble. I ordered 2 of these and also ordered the extra wheels for the bottom. The second one went together way faster. They don't give you extra screws so don't break any or loose any, You Need every one that you get! We love the look of the garage. We have the roll a round work bench and some of the wall cabinets and 2 of the smaller storage cabinets in our garage.

Their line of products are a great value. They go together very well. Make sure you don't cross thread the bolts. They look great and are very solid when complete. The only reason for 4 stars on quality is packaging. I had them shipped to my house and they get little dings and bends. Most can be bent back during assembly and don't show. I would not hesitate to order them again.