Super nice pressure washer with plenty of pressure. I've never had a Honda engine machine that did not start in one pull or, at most, two pulls. And I've had generators, compressors, lawnmowers with Honda engines. This is the first pressure washer with a Honda. I swear by them!

I have spent 24 hours cleaning with the unit. It starts on the second pull every time. It takes about 60 seconds to come up to full pressure, then you are ready to clean for about 45-60 minutes on a full tank of gas. It reaches about 20 feet to clean mold off of siding. The dial a wash feature is nice for rinsing off cars and other low pressure tasks. With the 0 degree nozzle and being very close, 1 -2 inches away, you can damage concrete or bricks if you are not careful. Overall a great power washer! Especially for the cost!

I bought this a few weeks ago and already have used I it many times. The motor is tremendous. You barely have to pull the rope to start it. Even though it is on the smaller size (2800 psi) it has more than enough power for homeowner jobs. ( washing siding, decks, concrete walks and autos) I’m glad I bought the smaller unit as it is easy to move,carry and manage. The way the machine was packed from the factory was excellent and the unit arrived without a scratch

I bought this pressure washer about a month ago. I have used it three times so far. It starts easily. Works as expected. Has to run for about 30 seconds before it has consistent pressure. The only problem is the wand holder is absolute garbage. It won't hold the wand if you move the machine. Flimsy doesn't begin to describe the plastic holder. I really like the bungee that holds the hose in place. Why didn't you make the wand holder that good? I used to own a Generac in the same power range. I like the way this works slightly better. You can move it from one place to another without the moter dying. And it's easier to start. Oh yeah one other thing that is a bit of an inconvenience. The hook ups for the hose and the water don't stick out as far as the Generac. Makes it more difficult to hook up.

The washer works and performs. I broke the cheap plastic piece that holds the spray handle off the first time I tried to start it. The idiotic plastic piece that holds the nozzles is pretty but also basically useless. Either put them in your pocket or pick them off the ground. They vibrate out immediately upon starting the engine. The hose is already kinked...I hope it makes it through the summer and parts are readily available

Very powerful unit. The only thing I see that needs correcting is the design of the nozzle holder. The nozzles will fall out while the machine is running. Other than that. this machine has outperformed all expectations. The only reason I did not give 5 stars was due to the nozzle holder.

We bought the machine two days ago. I assembled it today and my wife used it most of the day. Within an hour the additional nozzles vibrated out of the storage ports on the handle. Fortunately, I saw them lying on the lawn and recovered them. A much more secure means of storing them on the machine should have been designed. The water ports are too close to the ground. When pulling machine backwards, if the hose is not connected, dirt can be caught in the water hose inlet. With the hoses connected, they will scrape on the ground or no cement and be abraded. Mechanically, the machine worked well, and did a good job of cleaning.

I bought this recently and have used it twice. It is a really good pressure washer, and I love the pressure adjustment on the wand handle. Handy to break down and transport with easy removable handle. All the reports of the spray heads coming off the machine are true as they vibrate off easily. You need to reengineer this problem. Does a really good job, and easy to change out spray heads are great. Love the machine!

Bought the MS60773 in September, used it on [approximated area] 1000 sq ft (93 sq meters) exposed aggregate concrete residential driveway as first and so far only job. The unit performed well using the 20 degree nozzle. The aggregate had been sealed professionally when former owners lived here, using sealer with brown tinting to enhance the appearance of the exposed aggregate. The MS60773 effectively and completely removed the tinting, taking the aggregate back to it's original natural appearance. Job duration was about 3.5 hrs spray time. 4 stars instead of five due to noise level of motor, I feel like the Honda engine needs slightly more effective muffler/suppressor. Also, the quick release design for the top portion of the unit's handlebar causes it to rattle quite a lot when the unit is in use-- enough that I removed the top portion during use and only snapped it back on to move the unit when needed.

I used the pressure washer for the 1st time and it has plenty of pressure, problem was I could not adjust the pressure not like the picture and instruction showed, the wand has no pressure adjustment, if I wanted to work on something light weight it is difficult. Also, the nozzles are great until you don't snap them in all the way and verify that they are locked, you can loose a tip very quickly.