I had a 28 x 28 " shower, so this shower is definitely a welcomed change. Mine has frosted glass, but I did not see this option in the Ove line up. I had it professionally installed, so did not have the hassles others did. (Also had a wall removed and the shower plumbing moved to the opposite shower wall in this small bathroom.). It works well and it was a great investment for my small space.

Installed this month. The instructions aren’t super clear but we figured it out eventually. Sometimes with trial and error. They also don’t tell you until you see the instructions that you need to install it on drywall not studs and that you need 1x3’s to build a support.

I bought this in July but just installed it. The overall kit instructions were relatively easy to follow and with two people set up was good. It looks great! I needed a small shower for a small bathroom, and this one fit beautifully. Once installed and plumbing complete, it exceeded expectations.

I wish I knew it didn’t have the walls included . After I bought it & had my contractor open it is when we realized the walls were not included in the Kit. The word kit, I always thought it meant it came with everything , in this case it does not. It still was a thousand dollars! I’m hoping we can figure out something !!

I purchased this Jan 2021 for a pretty small bathroom. I found the shower base to be super sturdy with no flexing. It only took one 60 pound bag of mortar to set the form onto the floor. You will want mortar or cement, but not concrete. The aggregate in the concrete will interfere with setting the base. The shower walls were without blemish and while they feel flimsy, they are actually quite durable. The instructions for assembly were just ok, though the YouTube video was good as a backup. Just keep in mind there are a lot of different YouTube videos, so you will need to pick the one that is specifically for your model. One thing that did cause a bit of an issue for me was there wasn't any data on how far away from the shower form wall from the sheetrock. There is a void behind the shower wall, so my rough-in for the valve was too far into the wall, which was frustrating. If you are roughing in a valve, you will want to allow 1-1/2 inches from the surface of the shower form wall to the sheetrock behind the shower form wall. I also kept the film on the form during the installation, only peeling back what was necessary to caulk or to mount the hardware. Once the whole shower was assembled did I peel the rest of the protective film, and there were no scratches in the finish. Once assembled, it is a very solid feeling shower. The door operates smoothly, and having the magnetic strip to keep the water in is a real bonus. The photos are the work in progress.

I bought this shower (with walls) to replace an older MAAX shower (of similar design) in my basement after its base cracked and some water leaked into the subfloor below. Besides the cracked base, there were other problems with the old shower, so I decided the whole thing needed replaced. I'm somewhat handy, so I wanted to do as much of the tear-out and installation as possible by myself. The base of this new shower appeared thicker and sturdier than the old unit, so it gives me some confidence it will last longer. The drain location for this unit is near the corner whereas my old shower had the drain in the center. This required the drain pipe underneath the shower to be moved a foot or so. I opted to hire a handyman to move that drain pipe (which involved chiseling away a bunch of concrete) and get the base of the shower installed. Beyond that, I finished the rest of the installation myself. This occasionally required the help of my wife to hold something in place for me, but 95% of the time I worked alone. I like the glass enclosure versus my old plastic one. The two large glass pieces were a little heavy to maneuver during installation, but the door operates very smoothly and seems really sturdy. Overall, this shower seems built of higher quality materials than my old one, and I really hope it lasts.

Bought at Home Depot and installed myself. Instructions were clear (they did miss 1 step though that should be between steps 13 & 14: screw frame (L) to wall frame (E) with provided self- tapping screws). I figured that out quickly because shower moves around when doors close otherwise!! Also, TRY TO HAVE STUDS BEHIND THE CORNERS WHERE YOU SCREW THE SHOWER FRAME TO THE WALL!! They provide Ct rap plastic wall anchors (step 6&7) but two pulled right out so I used thicker screws that I had lying around). It’s a simple pretty and functional unit. Installation is a 2 person job. But great unit

Installed a month ago. Looks good. Other reviews are correct: the installation instructions are terrible. My experienced contractor was doing a lot of swearing during the prolonged assembly and installation process. Finished shower is nice, feels rather plasticy as expected, but a good price and fits well into our tiny bathroom space.

I completed a DIY installation of this shower kit in a very small bathroom at my 100+ year old cabin in Estes Park, CO. I installed the shower as a replacement for a clawfoot tub that took up too much space. I ended up using the shower base and glass enclosure but not the acrylic wall panels since the walls were too out of plumb. The instructions that came with the kit were generally clear and complete though a few details were omitted (e.g., need to drill pilot holes for installation of the frame to the wall tracks). The quality of the shower base and enclosure were very good. However, the phillips-head screws that came with the kit were soft and easily stripped so I bought hex-head screws that I used instead. I have not used the shower yet but I am very happy with the quality and appearance of the new shower.

We are home owners for about 6 years, very handy but not pros in the very least. Decided to rip out a bath and replace with a shower basin. It is Very small. Great for small or spare bathrooms. Not bad to install. It definitely took two people but for folks that have never installed a shower stall it was not a large project.